1/4 Inch Jorc Auto Solenoid Valve with Brass Body
Continuous Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flow-chat of Continuous Waste Plastic Pyrolysis Plant
Advantages of Continuous Waste Plastic Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Plastic Pyrolysis Plant
NO.
ITEM
Technical Parameter
1
Suitable Raw Materials
Small pieces of Waste tyre,rubber, waste plastic≤5cm
2
Operating Mode
Fully Continuous Operation
3
Structure
Horizontal Type Revolve
4
Loading and discharging
Fully Automatic Feeding and Discharging under High Temperature at Same Time
5
Capacity(24h)
8-20Mt
6
Work Pressure
Slightly Negative Pressure
7
Oil Yield of tyres
40%-45%
8
Reactor Rotational Speed
1R/M
9
Installation Power
110kw
10
Cooling Method
Cycle water
11
Type of Drive
Sprocket Wheel
12
Heating Method
Hot Air
13
Noise dB(A)
≤85
14
Main Reactor Weight (MT)
About 20Mt
15
Total Weight(MT)
About 45Mt
16
Installation Space Required
60m*20m
17
Manpower
2/shift
18
Shipment
5*40HC
19
Delivery time
≤70Days
Continuous Waste Plastic Pyrolysis Plant Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl
Specifications
Automatic electronic drain valve for air compressor
Automatic drain valve
-guarantee period: 1year
-Prevents rusting
Automatic electronic drain valve for air compressor
High quality, low cost
One kind of model suits all applications, simple installment,
Completely
Description: High Quality integrated electric drain valve / electric valve / brass valve
The electronic drain valve is a full-feature automatic electronic solenoid drain valve that cost-effectively removes condensate from compressors, receivers, dryers, aftercoolers, filters and drip legs.
Valve
MIC-A/B
Species
Two two straight valve
In / out interface size
1/2 "3/8" or 1/4"
The maximum working pressure
16Bar;40Bar;60Bar;80Bar
Minimum / maximum ambient temperature
2°C/55°C
The maximum temperature of the medium
90°C
The valve body
Forging brass, flow aperture 5.0mm (all stainless steel valve can special order)
Insulation
Heat group H
Protection grade
IP65
Voltage
24-230V AC/DC(voltage 380VAC can special order)
Voltage range
+/-10%
Installation position
Arbitrarily
Â
Timer auto drain valve for compressed air:
Specifications
Automatic electronic drain valve for air compressor
Automatic drain valve
-guarantee period: 1year
-Prevents rusting
Automatic electronic drain valve for air compressor
High quality, low cost
One kind of model suits all applications, simple installment,
Completely
Description: High Quality integrated electric drain valve / electric valve / brass valve
The electronic drain valve is a full-feature automatic electronic solenoid drain valve that cost-effectively removes condensate from compressors, receivers, dryers, aftercoolers, filters and drip legs.
Valve
MIC-A/B
Species
Two two straight valve
In / out interface size
1/2 "3/8" or 1/4"
The maximum working pressure
16Bar;40Bar;60Bar;80Bar
Minimum / maximum ambient temperature
2°C/55°C
The maximum temperature of the medium
90°C
The valve body
Forging brass, flow aperture 5.0mm (all stainless steel valve can special order)
Insulation
Heat group H
Protection grade
IP65
Voltage
24-230V AC/DC(voltage 380VAC can special order)
Voltage range
+/-10%
Installation position
Arbitrarily
Â
