6 Head High Speed Embroidery Machine for Cap & T Shirt Wy1206CH

6 head high speed embroidery machine for cap & t shirt WY1206CH
 

I. Main features of the embroidery machine
1. 9 needles, 8 heads, suitable for flat bed embroidery, cap
Embroidery and finished garments embroidery
2. Embroidery area: 400 x 450 mm, or 15.7" x 17.7"
3. Automatic thread trimmer
4. Maximum speed 850 SPM
5. 270° Wide cap frame unit
6. 8" color LCD display showing real time stitching
7. USB port ready
8. Auto color change
9. Thread break detection
10. Pre-Sew Design Trace capable
11. Memory size: 1, 000, 000 stitches
12. Electricity: 110V/60Hz or 220V/50Hz available
13. Start, Stop, and Emergency Stop
14. On-board lettering

II. Full coler control panel
1. 8" High Definition color LCD display showing real time stitching
2. Function keys including Menu, Speed up and slow
Down (also Page Up and Page Down), Help, USB-
Input, Parameter Settings, Clear, ESC, Enter, etc.
3. Numeric keys for selection of needles
4. Frame-moving keys
5. Manual Trimming
6. Manual Color Change
7. Embroidery Status
8. Embroidery Method
9. DOT Key to return to 100 degrees
10. Mutli languages available


III. Frames/hoops
1 Sash Frame: 40.5cm x 48cm (16" x 19") for single head, 81cm x 48cm (32" x 19") for 2 head
2 sets of back hoops for 30cm x 30cm (11.80" x 11.80") for each head
2 sets of front hoops of 19cm (7.50") for each head
2 sets of front hoops of 15cm (5.90") for each head
2 sets of front hoops of 12cm (4.70") for each head
2 sets of front hoops of 9cm (3.50") for each head

IV. Accessories
Table top
Operation Manual
Tool Kit
Bobbin Winder
 

NEEDLES Â	HEAD Â	EMBROIDERY SPACE(L*W) Â	HEAD INTERVAL(mm) Â	LENGTH(mm) Â	WIDTH(mm) Â	HEIGHT(mm) Â	WEIGHT(kg) Â
6\9\12 Â	2 Â	400*450 Â	400 Â	1520 Â	900 Â	1530 Â	350 Â
6\9\12 Â	4 Â	400*450 Â	400 Â	2620 Â	900 Â	1500 Â	600 Â
6\9\12 Â	6 Â	400*450 Â	400 Â	4250 Â	900 Â	1500 Â	950 Â
6\9\12 Â	8 Â	400*450 Â	400 Â	5050 Â	900 Â	1500 Â	1200 Â

Multi-head cap embroidery machine, with 2/4/6/8 head & 9/12 needles, which is suitable for flat embroidery, cap embroidery, T-shirt embroidery and finished garments embroidery.

Cold Drawn Tube or Cold Rolling Precision Seamless Tube (gb3639-2000) is used for mechanical structure pipe, hydraulic oil cylinder and equipment, with high precision and fine surface finish of cold drawing or cold rolled precision seamless steel tube.

Cold Drawn Steel Tube, cold rolled steel pipe unit is made of cold rolled, cold drawn or cold rolled and cold drawn pipe cold working methods of combining production of a complete set of gear combinations, the capillary billet or raw material tube expanding process of cold drawing for zhongtong too much processed is of deep processing of hot rolled steel tubes or welded pipe units. Cold drawn pipe: (1) the basic process pipe material used for hot rolling and rolling tube, (2) tube material inspection, pickling, phosphating, saponification (3) the cold drawing process to the specified inside diameter size (4) finished finishing: including the finished heat treatment, straightening, sampling, cutting head to tail, check (manual inspection and various testing), oil, packaging, warehousing, etc.

The company large seamless steel pipe material are all made of TPCO tianjin continuous process, after years of the galactic mature production technology, all steel pipe wall thickness, inner hole smooth level off, without bad spot and internal screw and height difference.

High-precision cold-drawn steel pipe is a new kind of high-tech energy-saving product. Its application can save steel, improve processing efficiency and save energy. The so-called high-precision cold-drawing tube is the inner and outer diameter of the precision (tolerance range), the inner and outer surface of the surface finish, the roundness, the straightness good, the wall thickness uniformity and other advantages. Internal diameter tolerance: H8, H9, straight line 0.3mm/ 1000mm, 0.5mm/ 1000mm.

The company adopts the 250T hydraulic cold-drawing machine for cold drawing, the inner diameter of product specification: 40mm- 630mm, outer diameter 50mm- 820mm, wall thickness: 5cm-40cm, cold-drawn tube single branch length is less than 13.5 meters

Steel tube weight calculation formula:

 [(outer diameter - wall thickness) * wall thickness] *0.02466= kg/meter (weight per meter)

Cold Drawn Tube

Cold Drawn Tube, Hydraulic Cylinder Cold Drawn Tube,Cold Drawn Seamless Steel Tube,Steel Pipe Cold Drawn Tube

Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com