Carbonated Soft Drink Pet Bottle Blower
Section Machine,Glass Section Machine,Cutting Equipment,Slicing Equipment Changzhou Kuaile Technology Co., Ltd , https://www.quartzglasssectionmachine.comFully-Automatic PET Water Bottle Stretch Blow Moding MachineÂ
Description
It is can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle products
1-Can be connected with filling machine directly. Saving the investment on the ordering-bottle machine.
2-Adopting high technology Micro PLC controller. Ensure the machine working properly and stable.
3-Sole heating electricity saving design.50% electricity saving comparing to the other machine.
4-Specially mould locking clamping system, 1.5 times efficiency.
5- Easy installation and starting
6- Low rejection rate: Less than 0.3percent.
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
1.Functionand advantages
2.Preform loading, bottle fetching and outputting
All the preform loading and bottle fetching and outputting movements are finished by mechanical transfer arms, which avoid contamination.
3.Changemoulds
The whole moulds changing takes only one hour.
4.Highautomation, low contamination
Fully enclosed design, finished bottle is transferred by mechanical arms and conveying belt, the whole production process avoids human contact, thus ensuring a healthy and cleaning environment which meets national health standards.
5.Stableand reliable performance
All the important parts, such as electric and pneumatic components, seals, bearings, and reducers, etc., are European or Japanese brands, ensuring a high qualified machine and reliable performance.
6.Human-machineInterface
Taiwan EV HMI, with a variety of parameters setting function, is easy to operate. Operators can modify the parameters while the machine is running, such as the pre-blowing, second blowing, blowing time, etc.
7.Easymaintenance
PLC communicates with machine. User can control every movement of the machine through this PLC. Once there is a failure, machine will alarm and display the problem. Operator can easily find the reason and solve the problem.
Longbow brand automatic linear blowing machine main technical parameters
Model
TBL-2000
TBL-4000
TBL-6000
TBL-8000
Type
Automatic
Automatic
Automatic
Automatic
Yield
2,000 pcs
4,000 pcs
6,000 pcs
8,000 pcs
PLC sys.
SIEMENS
SIEMENS
SIEMENS
SIEMENS
Actuator sys.
MITSUBISHI
MITSUBISHI
MITSUBISHI
MITSUBISHI
Operating system
Touch screen
Touch screen
Touch screen
Touch screen
Power Sylinder
SMC
SMC
SMC
SMC
Bottle size range
Up to 1.5 L
Up to 1.5 L
Up to 1.5 L
Up to 1.5 L
The main motor
40 kw
60 kw
60 kw
80 kw
Dimensions (mm)
2155×1750×2120
3280×1750×2200
5500×2200×2130
7280×3550×2200
Weight
3.5 T
5 T
6.5 T
10 T
Packaging&Shipping
Why choose us:
1.Installation and commissioning
Tecreat's engineers sent to the customer's side are all strictly trained and have rich on-site experience. Besides fulfilling the installation and commissioning, we can also assist the customer to manage the plant and the equipment.
2. Training service
Tecreat's engineer will introduce composition and functions of the equipment on the production line, Â Knowledge of production line designing, production planning, equipment part processing and quality assuring will be taught. Your works have to learn and practise in the plant, get familiar with crucial parts of the equipment,the assembling of the equipment and crucial components. Learn how to maintain and repair the equipment, and knowledge of safe operation.
3. Technician cooperation
Tecreat will send technicians to customers, especially in Africa, Asian, mid-east countries,which is short of necessary proficiency workers,to operate and matainn the machines, based on the employee contract with customer's company.
4. Spare parts
Tecreat guarantees that the spare parts are completely consistent with the original parts. With a complete after-sale service team and management system of spare parts,so we can response fast and can supply rapdly. According to customer's situation, we will establish"Spare Parts Offer" to guarantee the customer's production line to run as safely and continuity.
Â