Crack Width Detector for Crack Test
Our oil/gas fired boilers can be divided into SZS water tube boilers and WNS fire tube boilers depending on the medium inside the tubes. With multiple pressure designs, the water tube boilers can meet the steam supply requirements of 2.5MPa or above. The fire tube boilers, on the contrary, are intended for use at pressures below 2.5 MPa. Fire tube boilers usually have a capacity of below 20t/h, while water tube ones of 20t/h or more as capacity expansion is possible. Gas-fired(oil-fired) Boilers WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com
Quantitative measurement of the widths of cracks located on bridges, tunnels, walls, road surfaces, metal surfaces etc.
Performance features
The original image of the crack may be displayed on the screen with modern electronic imaging technology. Reliable measurement readings are possible using to high-precision ruler displayed on the screen.
Magnification
40 times
Instrument size
134×95×36(mm)
Measuring range
0.01mm ~ 2.00mm
probe
36×34×46(mm)
Minimum measuring  unit
0.01mm
Instrument weight
600g
Estimate accuraty
0.005mm
Probe weight
60g
Power supply
Internal rechargeble lithum battery, lifetime is approximately 5 hours
Quantitative measurement of the widths of cracks located on bridges, tunnels, walls, road surfaces, metal surfaces etc.
Performance features
The original image of the crack may be displayed on the screen with modern electronic imaging technology. Reliable measurement readings are possible using to high-precision ruler displayed on the screen.
Magnification
40 times
Instrument size
134×95×36(mm)
Measuring range
0.01mm ~ 2.00mm
probe
36×34×46(mm)
Minimum measuring  unit
0.01mm
Instrument weight
600g
Estimate accuraty
0.005mm
Probe weight
60g
Power supply
Internal rechargeble lithum battery, lifetime is approximately 5 hours