July-August domestic auto recalls 2.078 million vehicles, involving 17 brands and 46 models

Recently, according to the recall announcement issued by the AQSIQ's official website, the reporter organized the recall of domestic cars from July to August this year. The results show that from July to August this year, there were 22 announcements concerning car recalls involving 17 cars. Of the 46 types of vehicles in the company, the recall totaled approximately 2.078 million vehicles. Let's review these car recalls together.

August:

Ford Automobile Recalls 37,734 Explorer Tour Cars Due to Dust Cover Problems

Recall range:

Part of imported 2013-2016 explorer wagons produced from November 12, 2012 to June 9, 2016. According to statistics of the company, a total of 37,734 vehicles were involved in mainland China.

Recall reason:

In the recalled area of ​​some vehicles, under the combined action of dusty conditions and long periods of low-speed driving, the dust cover of the steering gear may be clogged; at the same time, the long-term low-speed driving makes the dust cover continuously exposed to high engine room temperatures. It may cause the dust cover to distort and form internal interference with the rod, which in turn causes damage and contaminants to enter the steering gear. In this case, abnormal noise may occur during steering, or steering assistance may decrease. In some cases, it may lead to failure of steering assistance and there is a safety hazard.

solution:

Ford Motor (China) Co., Ltd. will inspect the dust cover of the vehicle within the recall scope, and according to the inspection result, replace the corresponding parts of the affected vehicle to eliminate defects. Inventory vehicles will be sold after eliminating defects.

If the relevant customer hears an abnormal sound, he or she will turn to help reduce or lose the beeper warning sound, and at the same time, he will see the message “Power steering troubles, please check and repair” displayed on the instrument panel. Contact your authorized dealer for processing. The user should contact the dealer as soon as possible after the recall action begins.

Ford Motor (China) Co., Ltd. will notify customers by registered letter. Users can call Ford Motor (China) Co., Ltd. hotline 800-810-0740 to obtain relevant information of this recall. Users can also visit the website of Inspection and Supervision Department of AQSIQ (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about WeChat public number (AQSIQDPAC) to learn more. information.

Instrument bus bundles hidden in the bus recall 197 vehicles

Recall range:

A total of 161 LCK6108DGC buses were produced during the period from December 1, 2009 to November 30, 2010;

The production of LCK6109DGC passenger coaches for a total of 36 vehicles from August 1, 2011 to August 31, 2011.

Recall reason:

In this recall scope, the corrugated pipe was not installed in some vehicle instrument branch harnesses. After long-term use, the harness may be worn or short-circuited, resulting in the insurance fuses of electrical equipment such as meters, headlights, wiper motors, and passenger door pump solenoid valves. The equipment can not be used normally. Under extreme circumstances, it may cause the vehicle to catch fire and there are potential safety hazards. Zhongtong Bus Holdings Co., Ltd. will inspect the vehicles within the scope of the recall, add corrugated pipes to the instrument wiring harness and increase the corresponding fixed measures to eliminate potential safety hazards.

solution:

Zhongtong Bus Holdings Co., Ltd. will notify the owner by registered letter, telephone, etc., and through the authorized service station to take the initiative to contact the relevant owners to arrange free maintenance. Users can dial the customer service center hotline (400-760-8000) of Zhongtong Bus Holdings Co., Ltd. with a landline or mobile phone for consultation. You can also log on to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Parking brake switch badly contacted with imported 321 cars

Recall range:

From the period of November 20, 2013 to February 27, 2015, part of the imported 2013-2015 Genies series cars were produced. According to the statistics of the company, a total of 214 vehicles were involved in mainland China.

Recall reason:

Some vehicles in this recall area may have intermittent contact with the parking brake switch, which may cause the parking brake to work but the indicator light does not light up accordingly. At this time, the driver may be misled by the status of the indicator light, and he does not recognize that the parking brake is actually in the working state and drives the vehicle. At the initial stage of driving (within 1 to 2 km), poor acceleration occurs and the brakes near the parking brake are overheated. The phenomenon has security risks.

solution:

Hyundai Motor (China) Investment Co., Ltd. will replace the improved parking brake switch for vehicles in the recalled area free of charge to eliminate defects.

If the relevant user finds that the parking brake indicator is working abnormally, he should immediately release the parking brake and park the vehicle at the roadside, and contact the dealer for processing. The user should contact the dealer as soon as possible after the recall action begins.

Hyundai Motor (China) Investment Co., Ltd. will notify customers by registered letter. Users can obtain information about this recall by logging in to the Hyundai Motor (China) Investment Co., Ltd. website or calling the Hyundai Motor (China) Investment Co., Ltd. hotline at 400-885-3388/010-52270206. Users can also log on to the AQSIQ Inspection and Supervision Department website (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat account number (AQSIQDPAC) to learn more. information.

Electronic steering software problem Buick GL8 recalled 6451 vehicles

Recall range:

A total of 6,451 new Buick GL8 cars were produced in 2017 from June 6, 2016 to December 6, 2016.

Recall reason:

Vehicles within the scope of this recall may be caused by electronic calibration assistance software calibration problems, which may cause the electronic steering assistance system to report fault codes when some vehicles are traveling. In extreme cases, it may lead to the failure of the vehicle's electronic steering assistance and there are potential security risks. SAIC General Motors Co., Ltd. will upgrade the electronic steering assistance calibration software for vehicles within the recall scope to eliminate potential safety hazards.

solution:

The recall was conducted under the condition that the AQSIQ initiated the defect investigation. For some time, AQSIQ's defective product management center has received complaints from consumers about this issue. After receiving the complaint, AQSIQ immediately deployed the Defective Product Management Center to carry out defect investigation and assessment of the above issues. Due to the investigation, SAIC General Motors Co., Ltd. decided to adopt recall measures to eliminate potential safety hazards.

SAIC General Motors will notify customers by registered letter. After the recall is formally implemented, SAIC GM Buick Special Service Center will take the initiative to contact the users within the scope of the recall and arrange free maintenance. Users can call customer service hotline: SAIC GM Buick 8008202020 (landline call) / 4008202020 (mobile phone call) to consult. Owners can also log in to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Gearbox Harness Hidden Chevrolet Sail EMT Recalls 75,287 Vehicles

Recall range:

A total of 75,287 Chevrolet Sail EMT vehicles were recalled for production from 2010 to 2013 between September 26, 2009 and March 20, 2013.

Recall reason:

Vehicles within the scope of this recall, due to transmission harness problems, may cause misjudgment of the system when some vehicles are shifting, causing the vehicle fault light to light, and the vehicle power is limited. In extreme cases, the vehicle will enter neutral and power interruption will occur, posing a security risk. SAIC General Motors Co., Ltd. will inspect the vehicles in the recall range and replace the improved transmission wiring harness to eliminate potential safety hazards.

solution:

The recall was conducted under the condition that the AQSIQ initiated the defect investigation. For some time, AQSIQ's defective product management center has received complaints from consumers about this issue. After receiving the complaint, AQSIQ immediately deployed the Defective Product Management Center to carry out defect investigation and assessment of the above issues. Due to the investigation, SAIC General Motors Co., Ltd. decided to adopt recall measures to eliminate potential safety hazards.

SAIC General Motors will notify customers by registered letter. After the recall is formally implemented, the SAIC-GM Chevrolet Special Service Center will take the initiative to contact the users within the scope of the recall and arrange free replacement. Users can call the customer service hotline: SAIC-GM Chevrolet 8008201912 (landline call) / 4008201912 (mobile phone call) for consultation. Owners can also log in to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

July:

Brake light switch is not reasonable Dongfeng Nissan Teana recalled 30,279 vehicles

Recall range:

Some of the 2016 Dongfeng Nissan brand new Tianyi vehicles produced from June 17, 2016 to November 29, 2016 totaled 30,279 units.

Recall reason:

Vehicles within the scope of this recall are not able to withstand large currents because of the unreasonable selection of brake light switches, and brake light switches may ablate in some vehicles. If it continues to be used, the ablation switch in an extreme case will always be in an energized state and cause continuous heating, which may cause the circuit at the switch to melt, which increases the risk of fire in the vehicle and presents potential safety hazards. Dongfeng Motor Co., Ltd. will replace the improved brake light switch in the recalled area to eliminate potential safety hazards.

solution:

Dongfeng Motor Co., Ltd. will take the initiative to contact the relevant owners by means of registered letters through the Dongfeng Nissan franchise store to arrange free maintenance. Users can call the customer service hotline 800-830-8899 (landline call), 400-830-8899 (mobile phone call) for consultation. Owners can also log on to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Vehicle rear reflector hidden BMW 5 Series recall 1559 vehicles

Recall range:

From January 30, 2013 to June 29, 2013, part of the 2013 BMW 5 Series (standard wheelbase) series cars were produced. According to statistics of the company, a total of 1559 vehicles were involved in the mainland of China.

Recall reason:

Due to the supplier's production reasons, some vehicles in the recall scope have lower reflectance of the reflector at the rear of the vehicle than the lower limit of the standard. This results in the possibility of the vehicle being found in the low illumination environment when the vehicle is parked and turned off and all vehicle lights are turned off. Security risks.

solution:

BMW (China) Automobile Trading Co., Ltd. will replace the rear reflectors for vehicles in the recall area free of charge to eliminate defects.

When the relevant user parks on the street at night, they should choose parking in the light where possible. The user should contact the dealer as soon as possible after the recall action begins.

BMW (China) Automobile Trading Co., Ltd. will notify customers by registered letter. Users can call the BMW (China) Automobile Trading Co., Ltd. hotline 400-800-6666 to get relevant information on this recall through fixed line or mobile phone. Users can also log on to the AQSIQ Inspection and Supervision Department website (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat account number (AQSIQDPAC) to learn more. information.

Airworthy BMW and BMW recalled 28,676 vehicles and 206,620 vehicles respectively due to air bag hidden dangers

Recall range:

Some domestically produced BMW Brilliance 320i, 325i, 320Li, 328Li, 335Li and X1 vehicles produced from July 12, 2005 to December 26, 2012 totaled 28,676 vehicles;

Some of the imported BMW 120i, 130i, 316i, 320i, 325i, 330i, 335i, X1, X3, X5, X6, M3 and M6 vehicles from December 9, 2005 to December 22, 2012 totaled 206,620 vehicles.

Recall reason:

The airbags of the vehicle within the scope of this recall were equipped with an ammonium nitrate gas generator produced by Takata Corporation without desiccant. During the deployment of the airbag, the gas generator may be damaged, causing debris to fly out and injuring people in the vehicle. This poses a safety hazard. BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will replace the airbag inflators for the vehicles within the recalled area free of charge to eliminate potential safety hazards. (Note: For the X5 and X6 vehicles, the involved parts are the front airbags for the driver and front passengers; for other types of vehicles, the involved parts are the front airbags for the driver.)

solution:

The recall is a change of the recall activities of "BMW China Automobile Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. recalling some domestic and imported BMW cars" issued on December 23, 2016 and February 6, 2017. Due to the delay in the supply of airbag gas generators for maintenance recalls, the recall start time was changed from August 1, 2017 and October 9, 2017 to November 13, 2017. The original recall plan is invalidated and the information released this time shall prevail. All losses resulting from this change will be borne by BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd.

BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will re-send notification of the delay of the recall start date by registered dealers through the distributors. After the recall begins, BMW authorized dealers will contact the relevant owners to arrange recalls. Users can call the BMW service hotline 400-800-6666 for consultation. Owners can also log in to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Universal joints bolt hidden Mercedes-Benz recalled 5173 imported G-class off-road vehicles

Recall range:

From July 25, 2012 to January 20, 2017, some of the G-class off-road vehicles of 2012-2016 were imported. According to statistics of the company, a total of 5,173 vehicles were involved in the mainland of China.

Recall reason:

Due to production deviations in some vehicles within the scope of this recall, the fastening torque of the universal joint fixing bolt at the bottom of the steering column does not meet the requirements, which may cause excessive wear of the universal joint and the accuracy of the vehicle steering. In some cases, the steering wheel and steering Torque transmission between agencies may be completely interrupted, resulting in the vehicle can not be turned, increasing the risk of vehicle collisions, there are security risks.

solution:

Mercedes-Benz (China) Automobile Sales Co., Ltd. will replace the bottom universal joint of the steering column for the vehicles within the recall scope to eliminate defects.

Related users should drive carefully. The user should contact the dealer as soon as possible after the recall action begins.

Mercedes-Benz (China) Automobile Sales Co., Ltd. will notify customers by registered letter. Users can call the Mercedes-Benz (China) Automobile Sales Co., Ltd. hotline 400-818-1188 to obtain relevant information on the landline or mobile phone. Users can also log on to the AQSIQ Inspection and Supervision Department website (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website (), and pay attention to the WeChat public number (AQSIQDPAC) for more information.

Seat Belt Pretensioner Hidden Behind Lincoln MKZ Recalls 316 Vehicles

Recall range:

Some of the 2015 Lincoln MKZ series cars were produced during the period from June 11, 2014 to July 31, 2014. According to the statistics of the company, a total of 316 vehicles were involved in mainland China.

Recall reason:

During the collision of some vehicles in this recall range, the internal tension generated during the operation of the seat belt pretensioner caused the strength of the pull wire to decrease, and the pull force required to restrain the occupant cannot be reached. The front of the driver and the front of the passenger The seat belt pretensioner cable may become detached. This will result in the seat belt being unable to fully restrain the occupants in the event of a vehicle collision, increasing the risk of occupant injury and causing potential safety hazards.

solution:

Ford Motor (China) Co., Ltd. will apply a viscous silicone coating on the seatbelt pretensioner cable to remove defects in vehicles in the recall range.

Ask relevant users to drive carefully to avoid vehicle collisions. Users should contact the Ford China Lincoln Brand Authorized Dealer for repairs as soon as possible after the recall action begins.

The recall is a change of the recall of “Ford Motor (China) Co., Ltd. recalling some imported Lincoln MKZ cars” released on January 10, 2017. The reason for the change is that the delivery time of the parts for recalling maintenance is delayed from the original recall schedule.

The original recall plan is invalidated and the information released this time shall prevail. All losses resulting from this change will be borne by Ford Motor (China) Co., Ltd.

Ford Motor (China) Co., Ltd. will notify users by registered mail. Users can call the Lincoln Customer Service Center hotline 400-988-6789 to get information about this recall. Users can also log on to AQSIQ's Inspection and Supervision Department website (), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about WeChat public account number (AQSIQDPAC) for more information.

Wiper Motor Mitsubishi recalled 54,672 Outlander EX Jin Jie

Recall range:

During the period from November 23, 2006 to September 27, 2012, some of the imported models from the Outlander EX series of 2007-2012 cars were produced. According to the statistics of the company, there were 54,672 vehicles imported from mainland China.

Recall reason:

Some of the vehicles in the recalled area were affected by the resin cap structure of the front windshield wiper motor with the breathing hole, which caused the moisture accumulated in the area of ​​the front windshield wiper cover to drip from the periphery of the wiper motor and accumulate in the motor's breathing. Hole around. In the cooling process after the motor is running, rainwater will be sucked into the motor through the breathing hole, causing internal parts to rust, get stuck, or circuit failures. In severe cases, the motor will stop operating, affecting the driver's forward vision, and there will be potential safety hazards.

solution:

Mitsubishi Motors Sales (China) Co., Ltd. will replace the modified front windshield wiper motor assembly for free in the recalled area to eliminate defects.

This recall and Mitsubishi Motors Sales (China) Co., Ltd.'s change in the recall of some imported Outlander EX series vehicles released on June 19, 2017, although the recalled vehicle range and the final phenomenon are the same, but due to its defective parts Different, so the implementation of the recall.

Mitsubishi Motors Sales (China) Co., Ltd. will notify customers by registered letter. Users can log on Mitsubishi Motors Sales (China) Co., Ltd. website or call Mitsubishi Motors Sales (China) Co., Ltd. hotline 4009773030 (both fixed-line phones are available) to obtain relevant recall information. Users can also log on to AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), AQSIQ defective product management center website (), China Auto Recall Network () and concerned WeChat account number (AQSIQDPAC) Learn more information.

Hidden Danger of Engine Compartment Hyundai Recalls 26124 Shengda and Gerui

Recall range:

From January 3, 2012 to April 3, 2015, part of the imported Shengda series vehicles from 2012 to 2015 were produced, a total of 9502 vehicles:

From July 7, 2012 to April 26, 2016, some of the 2012-2016 Ge Rui series cars were imported, totaling 16,622 vehicles.

Recall reason:

Vehicles in this recall range are made of galvanized steel because of the locking device of the engine compartment cover. When the protection cover of the cable pulls off and external moisture enters, the cable may corrode and adhere, resulting in secondary locking of the engine cover. The device is not working properly, and the engine compartment cover may accidentally open automatically when the vehicle is in motion, which affects the driver's line of sight and presents potential safety hazards.

solution:

Hyundai Motor (China) Investment Co., Ltd. will replace the modified engine hatch cover locking device for free in the recalled area to eliminate defects.

The relevant user should drive with care. If the engine compartment lid is found to be automatically opened, the vehicle should be parked on the roadside in time and contact an authorized dealer for processing. The user should contact the dealer as soon as possible after the recall action begins.

Hyundai Motor (China) Investment Co., Ltd. will notify customers by registered letter. Users can log in to the Hyundai Motor website or call the Hyundai Motors (China) Customer Service Hotline at 400-885-3388/010-52270206 and after-sales service hotlines at various service stations to obtain relevant information on this recall. Users can also log on to the AQSIQ Inspection and Supervision Department website (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat account number (AQSIQDPAC) to learn more. information.

Battery sensor issue Guangqi recalls 621003 Accord and Ling Pai sedan

Recall range:

The 2014-2016 Accord brand cars produced from January 31, 2013 to November 3, 2015 totaled 270,443 units.

From January 24, 2013 to September 26, 2015, there were a total of 350,560 Lingpai cars produced during the 2014-2015 period.

Recall reason:

Due to the manufacturer's manufacturing reasons, the external conductive liquid may invade the inside of the plated through hole of the sensor substrate of the battery and cause a short circuit, which may result in burning of components. In extreme cases, it may cause a fire in the engine compartment, posing a potential safety hazard. Guangqi Honda Motor Co., Ltd. will replace the battery sensors in the recall area free of charge to eliminate potential safety hazards.

solution:

Guangqi Honda Automobile Co., Ltd. will notify relevant users through registered mail or express delivery, while Guangqi Honda Automobile Special Service Store will also notify relevant users via telephone, SMS, etc. Users can call Guangqi Honda Customer Service Hotline (fixed line users), 400-830-8999 (mobile phone users) and special sales service hotline for consultation. Users can also log in to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Battery sensor problem Dongfeng Honda recalled 140876 Jed

Recall range:

A total of 140,876 JADE cars were produced between November 14, 2012 and November 16, 2015.

Recall reason:

Due to the manufacturer's manufacturing reasons, the external conductive liquid may invade the interior of the plated through hole of the sensor substrate of the battery and cause a short circuit, which may result in burning of the components. In extreme cases, it may cause a fire in the engine compartment, posing a potential safety hazard. Dongfeng Honda Automobile Co., Ltd. will replace the battery sensor of the vehicles within the target area for free to eliminate potential safety hazards.

solution:

Dongfeng Honda Automobile Co., Ltd. and Dongfeng Honda Automobile Co., Ltd. special sales service stores will send notices to registered owners through registered letters and telephones. Users can call customer service hotline 800-880-9899 (fixed), 400-880-6622 (mobile phone, fixed line) for consultation. Users can also log in to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Tire pressure monitoring is not allowed Aston Martin Ladarda recalled 111 DB11

Recall range:

From the period of November 9, 2016 to May 26, 2017, part of the imported DB11 series cars of 2017 models were imported. According to statistics of the company, 111 vehicles were involved in the mainland of China.

Recall reason:

When the tire pressure is lower than the minimum trigger pressure (1.9bar for the front tire and 2.0bar for the rear tire) due to the incorrect code data of the tire pressure monitoring module of some vehicles in this recall range, the tire pressure monitoring system cannot trigger the low pressure warning in time. Security risks.

solution:

Aston Martin Lakoda (China) Automobile Sales Co., Ltd. will update the code data of the tire pressure monitoring system module free of charge for vehicles within the recall scope to eliminate defects. Inventory vehicles will be sold after defects are eliminated.

The relevant user should drive with care. If abnormal tire pressure values ​​are found during driving, please contact an authorized dealer to check the tire and correct the tire pressure. Users should contact the distributors for software upgrades as soon as possible after the recall action begins.

Aston Martin Lada (China) Automobile Sales Co., Ltd. will notify customers by registered letter. Users can call the Aston Martin Lada (China) Automobile Sales Co., Ltd.'s after-sales service hotline to get information on this recall through a fixed line or mobile phone. Users can also visit the website of Inspection and Supervision Department of AQSIQ (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about WeChat public number (AQSIQDPAC) to learn more. information.

Brake booster hidden Mercedes-Benz recalled 16,301 imported A-class, B-class and CLA-class cars

Recall range:

From the period of June 30, 2012 to April 30, 2013, some of the imported A-series vehicles of 2012-2014 were imported, totaling 2,400 vehicles;

From February 10, 2012 to February 12, 2013, part of the imported 2012-2014 B-series vehicles, a total of 13,898 vehicles were produced.

From April 22, 2013 to April 26, 2013, some of the imported CLA series vehicles of 2012-2014 were partially imported, totaling 3 vehicles;

Recall reason:

Some of the vehicles within the scope of this recall due to suppliers manufacturing causes brake booster vacuum tube joints to fail to meet durability requirements. When the vacuum tube joint is damaged, the brake booster will no longer obtain a vacuum, and the vacuum assist will decrease. After the brake is 2 to 4 times, the vacuum in the brake booster will be exhausted, the brake booster will disappear, and the need for larger Power brake pedal. Because the driver cannot predict the loss of brake assistance, it may increase the risk of accidents and present potential safety hazards.

solution:

Mercedes-Benz (China) Automobile Sales Co., Ltd. will replace the vacuum tubes for vehicles in the recall area free of charge to eliminate defects.

If the relevant user finds that the brakes are hard, please go to the nearest authorized dealer for disposal. The user should contact the dealer as soon as possible after the recall action begins.

Mercedes-Benz (China) Automobile Sales Co., Ltd. will notify customers by registered letter. Users can call the Mercedes-Benz (China) Automobile Sales Co., Ltd. hotline 400-818-1188 to get relevant information on the landline or mobile phone. Users can also visit the website of Inspection and Supervision Department of AQSIQ (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about WeChat public number (AQSIQDPAC) to learn more. information.

Jaguar Land Rover recalls 1370 Jaguar XJ and XF SPORTBRAKE

Recall range:

(i) A portion of imported Jaguar XJ-series vehicles from 2010 to 2011 that were produced during the period from October 26, 2009 to September 22, 2010, a total of 579 vehicles;

(b) A portion of the 2015 Jaguar XF SPORTBRAKE series cars imported from February 11, 2014 to October 2, 2015, totaling 791 vehicles.

Recall reason:

In the above range (1), due to production reasons, the partial restraint control module software calibration will be reset to the initial state under certain conditions. When the vehicle is subjected to a frontal collision, the front airbag may not be deployed properly as expected, increasing the risk of occupant injury and causing potential safety hazards.

For the vehicle in the above range (II) due to design reasons, the harness connecting the auxiliary restraint control module to the side impact sensor is incorrectly connected. When the rear position of the vehicle B-pillar is impacted, the side air curtain may not be deployed or delayed in deployment, which increases the risk of injury to the rear-row occupant and poses a safety hazard.

solution:

For vehicles within the above-mentioned range (1), Jaguar Land Rover (China) Investment Co., Ltd. will upgrade the vehicles within the recall scope free of charge to control the module software to the latest version to eliminate defects.

For vehicles within the above range (II), Jaguar Land Rover (China) Investment Co., Ltd. will reconnect the signal line to the correct side impact sensor for the vehicles within the recall range to eliminate defects.

Related users should drive carefully to avoid collisions. The user should contact the dealer as soon as possible after the recall action begins.

Jaguar Land Rover (China) Investment Co., Ltd. will notify customers in the form of registered letters, telephone calls and text messages. Users can call the Jaguar Land Rover (China) Investment Co., Ltd. hotline 400-820-8955 for information on this recall through fixed-line or mobile phones. Users can also visit the website of Inspection and Supervision Department of AQSIQ (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about WeChat public number (AQSIQDPAC) to learn more. information.

Clutch and gearbox issues Chery recalls 5,549 EMT “smart” models of C-wing C3/C3R

Recall range:

Some of the Chery Kaiwing C3/C3R EMT “Intelligent Moving Gear” vehicles, which were manufactured from March 23, 2015 to March 30, 2017, totaled 5,549 vehicles.

Recall reason:

Due to the quality problems of clutch actuators and cables, control module software, and gearbox harness quality, some vehicles in the recalled area may cause misjudgment of the system when the vehicle shifts, causing the vehicle fault lamp to light, and the vehicle power is affected. In extreme cases, the transmission will enter a neutral position and there will be power interruptions and potential safety hazards. Chery Automobile Co., Ltd. will replace the TCU harnesses free of charge in the recalled area, update the TCU data, check the status of clutch actuators and cables, and replace the clutch actuators and cables that do not meet the requirements to eliminate potential safety hazards.

solution:

The recall was conducted under the condition that the AQSIQ initiated the defect investigation. For some time, AQSIQ's defective product management center has received complaints from consumers about this issue. After receiving the complaint, AQSIQ immediately deployed the Defective Product Management Center to carry out defect investigation and assessment of the above issues. Due to the investigation, Chery Automobile Co., Ltd. decided to adopt recall measures to eliminate potential safety hazards.

Chery Automobile Co., Ltd. through Wuhu Kaiyi Automobile Co., Ltd., through registered mail, telephone, SMS, etc., notify relevant customers to contact the nearest authorized dealers to arrange for recalls and repairs. The owners can use the fixed telephone or mobile phone to call the factory hotline. Or contact an authorized dealer of Wuhu Kaiyi Automobile Co., Ltd. for related matters. Car owners can also log on to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Crankshaft cover dust hidden in FAW and Mazda recalled Artz and A Fujisawa 82235

Recall range:

FAW Car Co., Ltd. recalled some domestic Atez cars produced during the period from July 31, 2013 to June 29, 2016, totaling 80,235 units.

Mazda (China) Enterprise Management Co., Ltd. recalled some of the imported Azusawa cars produced during the period from April 23, 2013 to November 6, 2013, totaling 2,000 units.

Recall reason:

Due to the poor sealing structure of the rear-wheel mechanical parking brake caliper dust cover, the inside of the recalled area caused the water inside the caliper to rust. Continuous use in this case may cause poor sliding performance of the roller and decrease of the parking brake force. In some cases, slipping may occur and there is a safety hazard. FAW Car Co., Ltd. and Mazda (China) Corporate Management Co., Ltd. will test the roll of vehicles within the scope of the recall. If any rust is found, replace the new brake caliper assembly; if no rust is found, replace the dust cover. Components to eliminate security risks.

solution:

Relevant users should drive with care. When they find that the parking brake is being dragged, the brake lever is being stretched, and the braking force of the parking brake is decreasing, please go to a nearby dealership for inspection and repair. The user should contact the dealer as soon as possible after the recall action begins.

FAW Car Co., Ltd. and Mazda (China) Enterprise Management Co., Ltd. will entrust FAW Mazda to notify related users by registered letter and other forms, and publish recall information through the media. Users can call FAW Mazda customer service hotline, 0431-8599-1000 via fixed phone or mobile phone, or directly contact the nearest dealer to obtain relevant information of this recall. Users can also log on to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Hazard of air pockets Mazda 6 cars recalled 680,642 vehicles

Recall range:

Some domestic Mazda 6 cars produced during the period from September 18, 2008 to March 31, 2016 totaled 680,642 vehicles.

Recall reason:

The airbag of the passenger seat of the vehicle within the scope of this recall is equipped with an ammonium nitrate gas generator produced by Takata Corporation without desiccant. When the air bag is deployed, the air generator of the air bag may be damaged abnormally, resulting in flying out of the air bag and injuring the people in the vehicle, presenting a safety hazard. FAW Car Co., Ltd. will replace the co-driver airbag gas generators produced by other manufacturers for the vehicles within the recalled area free of charge to eliminate potential safety hazards.

solution:

FAW Car Co., Ltd. will entrust FAW Mazda Automobile Sales Co., Ltd. to notify users through registered dealers, etc. Users can contact the nearest dealer directly, or call FAW Mazda Automobile Sales Co., Ltd. via landline or mobile phone. Customer Service Center, 0431-85991000 for consultation. Owners can also log in to the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Gateway Control Software Issues Audi Q3 Cars Recalls 55848 Vehicles

Recall range:

Some domestic Audi Q3 models produced from November 7, 2015 to December 3, 2016 totaled 55,848.

Recall reason:

The software in the gateway control unit of the vehicle in this recall range is incorrect. If the electronic brake is used for emergency braking during the driving process, the brake light cannot be turned on, and the vehicle behind cannot receive the warning of vehicle braking. Increased the risk of vehicles being rear-ended, and there are potential safety hazards. FAW-Volkswagen Automotive Co., Ltd. will update the gateway control unit related software for free in the recalled area to eliminate potential safety hazards.

solution:

FAW-Volkswagen Automotive Co., Ltd. will notify the owner in the form of a registered letter. FAW-Volkswagen Audi franchised dealers will take the initiative to contact the relevant users for free maintenance. Users can also call FAW-Volkswagen Automotive Co., Ltd. Customer Service Hotline 400-817-1666 via fixed phone or mobile phone. Car owners can also visit the AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat public number (AQSIQDPAC) for more information.

Refrigerator inlet pipeline hidden problem BMW M760Li recalled 271 cars

Recall range:

Part of the imported 2016-2017 BMW M760Li series cars were produced during the period from August 18, 2016 to April 27, 2017. According to statistics of the company, 271 vehicles were involved in the mainland of China.

Recall reason:

Due to supplier's reasons, due to supplier's reasons, the left oil cooler inlet pipe was mixed with the wrong rubber pipe during production, which caused the rubber pipe part and the metal connector part to fail to connect properly. It may happen after prolonged use. Oil leak. As the leakage position is close to the front brake, the braking performance of the vehicle may be affected, and the risk of accidents occurring when the vehicle is traveling is increased, and there is a safety risk.

solution:

BMW (China) Automobile Trading Co., Ltd. will replace oil cooling pipes for recalled vehicles for free to eliminate defects. Inventory vehicles will be sold after defects are eliminated.

Relevant users should try to avoid drastic driving. The user should contact the dealer as soon as possible after the recall action begins.

This recall is a change from the "BMW (China) Automobile Trading Co., Ltd. recalled part of the imported BMW M760Li series cars" that was released on May 2, 2017. The reason for the change was that BMW recalled and replaced old parts through recycling analysis. As a result of new findings on the root cause of the defect, the scope of the recall was expanded and the maintenance plan was also changed. Vehicles that have completed the original recall must complete the recall again.

The original recall plan is invalidated and the information released this time shall prevail. All losses arising from this change will be borne by BMW (China) Automobile Trading Co., Ltd.

BMW (China) Automobile Trading Co., Ltd. will re-register customers with registered letters. Users can call the BMW (China) Automobile Trading Co., Ltd. hotline to obtain relevant recall information through fixed line or mobile phone. Users can also log on to the AQSIQ Inspection and Supervision Department website (jyjgs.aqsiq.gov.cn), AQSIQ Defective Product Management Center website (), China Auto Recall Network () and concerned about the WeChat account number (AQSIQDPAC) to learn more. information.