Pet Bottle Industrial Production Line

Model NO.: BLA-6
Installation: Free
Trademark: Blissum
Specification: CE/ISO/SGS
Origin: Zhangjiagang Jiangsu China
HS Code: 8422301090

Full-automatic Water Bottle bottle blow mold machine
Blissum's Bw series are the most stable two-step fully-automatic pet stretch-blow moulding machines(reheat). It has one to six cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
 
Features of Full-automatic Water Bottle bottle blow mold machine:
1. Stable performance with advanced PLC. 
2. Conveying preforms automatically with conveyor. 
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. 
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. 
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. 
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. 
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. 
8. Strong clamping force with high pressure and double crank links to lock the mold. 
9. Two ways of operating: Automatic and manual. 
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. 
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. 
12. Contamination is avoided for the bottle body. 
13. Ideal effect of the chilling with the chilling system. 
14. Easy installation and starting 
15. Low rejection rate: Less than 0.2 percent.
 
Configuration List of Full-automatic Water Bottle bottle blow mold machine:  
A). PLC colour display: Siemens(Germany)
B). Pneumatic parts: FESTO(Germany)
C). Controller of preform transfer: Servo motor National(Japan)
D). Other electric parts are all world-famous brand
 
Technical Parameter of Full-automatic Water Bottle bottle blow mold machine:

Model
BLS-2000HF,BLS-4000HF,BL-6000HF

Number of Cavities
2 Cavity,4 Cavity,6Cavity

Theoretical Output
2500BPH,4000BPH,6000BPH

Voltage Standard
380v/3PH/50Hz or special order

Total Power
48KW

Max.Container Volume
1.5L

Neck Diameter Range
20-50mm

Max.Container Height
320mm

Size
3.2*1.6*1.8m,4*1.6*1.8M,5*2.5*1.8M

Net Weight
2T,4T,6T

 
  
 
 
 

High-frequency Porcelain And Steatite Ceramic

High-Frequency Porcelain And Steatite Ceramic,Custom Ceramic Ornaments,Sanda Cigarette Holder Filters,Cigarette Pipe Filter Holder

Yixing Xiangyang Jiujiu Chinaware Industry Co., Ltd. , https://www.xyjjceramic.com