Turning oil mist lubrication application case

In most cases, the lathe is cooled by the cutting fluid. The use of a large amount of cutting fluid greatly affects the operating environment and the health of the operator, and the processing cost of the cutting waste liquid is also high. Many problems with the lubrication and cooling of cutting fluids have led to new technologies to replace traditional lubrication cooling methods.

The area where the cutting tool is prone to wear during turning is the rake face. Therefore, a small amount of lubricating oil mist is sprayed and infiltrated into the process to greatly reduce the friction. When using lath oil mist lubrication, it is necessary to pay attention to the following contents: For the external injection system lathe, the installation of the micro lubrication system should not affect the movement of the processing and other components; the internal lubrication lubrication lathe is the lubricant sprayed into the form of suspended oil mist particles. In the cutting area, the reliable flow of suspended particles must be maintained. Therefore, the design of the machine tool should be considered to ensure the reliable transportation of the suspended particles and the sealing of the channel. The matching of the cutting tool holder and the cutting tool should ensure that the lubricating oil mist particles can reach the cutting area. .

The amount of back-feeding, feed and cutting line speed in lathe processing are the main factors affecting the processing quality and processing efficiency, in order to improve the influence of cutting fluid on the processing environment and the adverse effects on lathe maintenance. Research and application of micro-oil mist lubrication on lathes is necessary. The advantages of the micro lubrication method are:

1,
Reduce cutting and maintenance costs.

2. The machine tool does not need to consider the protection design to prevent leakage, which can improve the life of the electrical system and reduce maintenance costs.

3,
Better processing quality and higher processing efficiency.

4,
Improve the processing life of cutting tools.

The gas source pressure of the lathe oil mist lubrication system requires normal operation at 5-7 bar, and better results can be obtained when the gas source pressure is increased to 8-10 bar.

Refer to the following case:

material:
Aluminum alloy

Machine tool: lathe

Machine speed: 0-5000 rpm

Lubrication system: Previous 5% emulsion


Later, Cote II Miniature Lubricating Oil

Workpiece size; ¢24*98

Waist And Abdominal Muscle Training

There are various types of waist and abdominal fitness equipment, including but not limited to the following:
1. Slimming machine: This is a fitness equipment that uses vibration to help reduce abdominal fat, suitable for people who want to engage in aerobic exercise at home. The fat slinger uses vibration and heating technology to help burn fat and achieve the effect of reducing fat and shaping. ‌
2. Health Wheel: A health wheel is a device used to exercise abdominal muscles. By using the health wheel to push and compress, it can effectively exercise the core muscles of the abdomen, helping to enhance the strength and stability of the abdominal muscles. ‌
3. Sit up assist: This is an assistive device that helps with sit ups, reducing pressure on the lumbar spine while providing stable support, suitable for beginners and those who need to strengthen abdominal training. ‌
4. Abdominal rolling equipment: Abdominal rolling equipment is specifically designed to exercise abdominal muscles, and through different movements and resistance settings, it can comprehensively exercise various parts of the abdomen.
5. Pedal Puller: This is a multifunctional fitness equipment that can be used for stretching training, helping to exercise abdominal, back, and upper limb muscles, as well as assisting with aerobic exercise. ‌
6. Roman chair: Roman chairs are mainly used to exercise the muscles of the waist and back, including compound training of the abdomen and back, suitable for people who want to comprehensively exercise the muscles of the waist and abdomen. ‌
7. Hip bridge machine: This is a specialized equipment used to exercise the muscles of the buttocks and abdomen. By performing hip bridge movements, it can effectively exercise the buttocks and core muscle groups. ‌
Choosing appropriate waist and abdominal fitness equipment is crucial for improving exercise effectiveness and preventing sports injuries. Different equipment is suitable for different populations and exercise goals, so the selection needs to be based on individual physical condition and exercise needs.

Adjustable Abdominal Bench,Roman Chair,Rolling Machine,Supine Board,Double bar knee trainer

Xuzhou Hongxing Gym Equipment Co., Ltd , https://www.hxyfitness.com