What is the reason for the water on the vehicle's hoistway?

If the truck crane is used in areas with high air humidity and large temperature difference between day and night, there will be problems with water in the air path. For example, the problem of water in the gas pipelines in Sichuan and Qinghai is more prominent. Air in the air path will cause rust in the valve body, damage the solenoid valve, and the brake performance will be affected; the water in the air pipe will overflow through the air pipe interface and spray on the circuit board to burn the circuit board of the machine; in the winter, the valve body will freeze, The problem of car brake failure, this situation will appear more clearly in the northern region.
Normal driving vehicles are hung in mountainous areas and hilly areas, especially in the form of downhill roads or frequent traffic jams, and the distance between vehicles is small. It is also necessary to prevent other vehicles from jumping in the queue, and braking delays caused by water in the gas path when frequent starting and braking are required. It will feel very obvious. In general, the desiccating effect of the dryer air intake tube is poor, the compressed air is insufficiently cooled before entering the desiccator, the air compressor is not drained for a long time, the air tank is not drained, and the life of the desiccator may be reduced under certain specific climatic conditions. In case of failure, it will cause water accumulation in the brake pipe, resulting in reduced braking performance.

Warm Baby Punching Machine

Our company specializes in warm baby punching needle roller, warm baby punching needle roller supply, warm baby punching needle roller wholesale, product quality and processing technology reliability, stability are at the domestic advanced level, and can be produced according to customer requirements. Special specifications of needle roller, needle ring products. Welcome customers to consult.

The punching machine is composed of four parts that cooperate with each other to complete the punching process. First, move the material to the scanning area of the camera of the automatic punching machine. After the camera scans the image, it will process and give the control part a signal. After the control part receives the signal, it will further process and control the movement of the transmission part to make the punch on the plane X Axis and Y-axis are moving. After the moving action is completed, the pneumatic part starts to work, and the solenoid valve controls the cylinder to perform the punching action. The automatic punching machine punches printing positioning holes, and the whole action is done in one go, fast, accurate and efficient. Warm baby technology transfer Multi-row warm baby machine single row machine horizontal warm baby packaging machine, providing warm baby production technology and formula, 200mm interval to produce any shape of warm baby. Due to the horizontal molding process, the heating elements in the patch are uniformly distributed, light weight, only thickness-the active part is evenly heated, providing an imported warm baby packaging machine, perfect product, impeccable

perforated needle,Warm baby punch machine, warm baby needle roller, warm baby processing equipment, warm paste non-woven hole punching machine, warm baby micro hole needle roller, warm baby perforated needle roller

Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.czsmmsmachine.com