What special equipment must be equipped for dangerous goods transport vehicles
Fireproof, explosion-proof and anti-static is very important for dangerous goods transport vehicles. To ensure fireproof, explosion-proof and antistatic, safe transportation must be equipped with some special equipment. 1. Static conductive rubber mop The static conductive rubber mop is installed on the chassis of the vehicle. It can introduce static electricity into the ground, keep the car body at zero point, and prevent the generation of static sparks. Second, ionized smoke fire detector The cargo compartment should have good smoke alarm performance. When there is smoke, the smoke detection fire alarm should be issued within 3 minutes. There is a built-in alarm device in the cab, and the alarm sound intensity is above 100 dB. Third, static conductive rubber sheet The floor of the cargo compartment should be laid with a flame-retardant static conductive rubber sheet and fixed with a static conductive adhesive. The glue is evenly spread, the rubber sheet is evenly bonded, the interface is tight, the gap is minimized, and the adhesive is filled. The board should not be wrinkled or warped. Fourth, anti-explosion container Anti-explosive containers should be stored in the rear bin. The thickness of the separation wall should not be less than 80mm. The interlayer of the wall should be filled with materials that can absorb the energy of the explosion shock wave and are non-combustible (or flame-retardant). When installing anti-explosive containers, the location of the vent hole should be away from the important parts of the automobile chassis. V. Ventilation windows and vents The ventilation window is formed by one-time pressing through a special mold, which has the functions of preventing rain and ventilation. The vents are installed on the side panels of the side compartments corresponding to the ventilation windows to ensure air circulation in the compartments. Six, warning signs The cargo box should also be painted with safety notices, diamond-shaped labels for explosives, hazard lights, orange explosions, etc. to facilitate identification and discovery by other personnel. Seven, anti-theft alarm and cabinet skin The skin material in the cargo compartment should be selected from flame retardant materials that do not produce sparks upon impact. Non-ferrous metal materials or marine plywood can be used. The inner surface of marine plywood should be coated with fireproof coating. The gap between the inner and outer skins of the cargo compartment should be filled with flame-retardant and heat-insulating materials, and the outside of the metal outer skin should be sprayed with light-color paint. In addition, the door frame is equipped with an anti-theft alarm device to ensure the safety of the cabin. Manager Zhang, Chengli Group's Key Account Division Mortar fine stone concrete pump product is a mortar conveying equipment specially developed for the characteristics of floor heating construction. It is suitable for large-area and high-efficiency construction of fine stone concrete filling layer or mortar filling layer in floor heating engineering. Fine Stone Concrete Transfer Pump Fine Stone Pump,Portable Concrete Pump,Secondary Constructional Column Pump,Fine Stone Concrete Transfer Pump Boron Machinery Manufacturing CO. LTD , https://www.boronjx.com
