Bearing, Thrust Roller Bearings, , Spherical Thrust Roller Bearing 811321

  • Model NO.: 811321
  • The Number of Rows: Single
  • Material: Bearing Steel
  • Load Direction: Radial Bearing
  • Bearing Series: 29200, 29300, 29400, 9069200, 9069300, 9069400 Ser
  • Material of Rings and Balls: Gcr15, Gcr15simn
  • Service: OEM Services Provided
  • Specification: ABEC-1; ISO9001: 2008
  • HS Code: 8482
  • Rolling Body: Ball Bearings
  • Outer Dimension: Medium and Large(120-190mm)
  • Spherical: Aligning Bearings
  • Separated: Separated
  • Od: 190-1400mm
  • Structure: a Brass Cage Which Is Guided by a Sleeve Held in
  • Trademark: LZWB &Neutral available
  • Origin: China

Descriptions on LZWB spherical thrust roller bearing :

Thrust spherical roller bearings for axial load mainly axial. Meridional joint load, but after the load should not exceed 55% of the axial load. With the other thrust roller bearings, such bearings lower friction coefficient, high speed, and with self-aligning capability. 29000 roller bearing asymmetric spherical roller, can reduce the stick and the raceway at work relative sliding and roller length. Diameter, roller quantity load capacity, often using oil lubrication, individual low speed can be greased. In the design selection should be preferred.

Thrust Roller Bearings are available with cylindrical or spherical rollers. These bearings sustain only axial loads, but have high axial rigidity and are suitable for heavy loads. They contain convex rollers, have a self-aligning capability and are free of any influence of shaft deflection or mounting error. Standard cages are machined brass, where the E-type offers a pressed cage for high load capacity.

Model		 Dimension (mm) Weight (KG) Model Dimension(mm) Weight (KG)
81120 100 × 135 × 25 1 81211 55 × 90 × 25 0.708
81122 110 × 145 × 25 1.1 81212 60 × 95 × 26 0.64
81124 120 × 155 × 25 1.23 81213 65 × 100 × 27 0.874
81126 130 × 170 × 30 1.7 81214 70 × 105 × 27 0.77
81128 140 × 180 × 31 1.95 81215 75 × 110 × 27 0.979
81130 150 × 190 × 31 2.05 81216 80 × 115 × 28 0.9
81132 160 × 200 × 31 2.2 81217 85 × 125 × 31 1.44
81134 170 × 215 × 34 2.95 81218 90 × 135 × 35 1.75
81136 180 × 225 × 34 3.05 81220 100 × 150 × 38 2.58
81140 200 × 250 × 37 3.74 81222 110 × 160 × 38 -
81140/YA 200 × 250 × 37 4.28 81222M 110 × 160 × 38 2.8
81188 440 × 540 × 80 41.5 81224 120 × 170 × 39 2.7
811/530 530 × 640 × 85 55.5 81224M 120 × 170 × 39 2.94
811/850 850 × 1000 × 120 177.15 81226 130 × 190 × 45 4.29
81206 30 × 52 × 16 0.12 81228 140 × 200 × 46 4.55
81207 35 × 62 × 18 0.2 81230 150 × 215 × 50 5.9
81208 40 × 68 × 19 0.27 81232EA 160 × 225 × 51 -
81209 45 × 73 × 20 0.3 81232 160 × 225 × 51 6.2
81210 50 × 78 × 22 0.43 81234 170 × 240 × 55 7.7
81240 200 × 280 × 62 13.7 81236 180 × 250 × 56 8.25


 		 Dimension (kN) MASS
New No No d D H Cr Cor kg
29340 9039340 200 340 85 1610 5500 29.5
9069440 9069440 200 400 122 1740 6054 60.6
29440E 9039440E 200 400 122 2760 9000 71.1
29244 9039244 220 300 48 546 2400 10
9069344 9069334 220 360 85 970 3769 32.5
29344 9039344 220 360 85 1390 2800 28.6
9069444 9069444 220 420 122 1830 6624 68.7
29444 9039444 220 420 122 2880 9650 75
29248E 9039248E 240 340 60 799 3450 19.3
9069348 9069348 240 380 85 1320 4251 33.8
29348E 9039348E 240 380 85 1790 6550 35.5
9069448 9069448 240 440 122 1920 7158 70
29448E 9039448E 240 440 122 2990 10200 80
9069252 9069252 260 360 60 645 2877 16.9
29252 9039252 260 360 60 817 3650 18.5
9069352 9069352 260 420 95 1390 5793 45.6
29352E 9039352E 260 420 95 2220 8300 53.6
9069452 9069452 260 480 132 2120 8118 91.8
29452E 9039452E 260 480 132 3510 12900 105
9069356 9069356 280 440 95 1410 5980 48.4
29356E 9039356E 280 440 95 2190 8650 53
9069456 9069456 280 520 145 2550 9828 115
29456E 9039456E 280 520 145 4310 15300 135
9069360 9069360 300 480 109 1870 7640 61.4
29360 9039360 300 480 109 2670 10600 75
9069364 9069364 320 500 109 2030 7915 73.4
29364E 9039364E 320 500 109 2880 11200 78
9069464 9069464 320 580 155 2930 11660 171
29464E 9039464E 320 580 155 4950 19000 175
9069368 9069368 340 540 122 2710 11000 94.9
29368 9039368 340 540 122 2710 11000 105
29468 9039468 340 620 170 4550 17480 226
9069472 9069472 360 640 170 3790 15440 199
29472E 9039472E 360 640 170 5350 21200 230
29276E 9039276E 380 520 85 1460 6800 50
9069280 9069280 400 540 85 1260 7060 49
29280 9039280 400 540 85 1610 8000 55.5
9069380 9069380 400 620 132 2860 12050 134
29380 9039380 400 620 132 3450 14600 150
9069480 9069480 400 710 185 4820 19060 388
29480E 9039480E 400 710 185 6560 26500 310
29392 9039392 460 710 150 4310 19000 217
9069296 9069296 480 650 103 1950 10500 89.4
29296 9039296 480 650 103 2350 11800 98
29396 9039396 480 730 150 4370 19600 220
29496E 9039496E 480 850 224 9550 39000 550
90692/500 90692/500 500 670 103 1950 10540 89.6
292/500 90392/500 500 670 103 2390 12500 100
90693/500 90693/500 500 750 150 3520 16900 203
293/500 90393/500 500 750 150 4490 20400 235
90694/500 90694/500 500 870 224 6290 27340 520
294/500E 90394/500E 500 870 224 9370 40000 560
293/530 90393/530 530 800 160 5230 23600 270
294/530E 90394/530E 530 920 236 9000 41950 624
90694/530 90694/530 530 920 236 8386 32630 573
292/560 90392/560 560 750 115 2990 16000 140
90692/560 90692/560 560 750 115 2430 13320 127
292/600 90392/600 600 800 122 3420 20500 172
90694/600 90694/600 600 1030 258 9626 37580 700
90692/630 90692/630 630 850 132 3270 17760 188
292/630E 90392/630E 630 850 132 4770 23600 210
293/630E 90393/630E 630 950 190 8450 38000 485
90692/670 90692/670 670 900 140 3670 20280 218
292/670 90392/670 670 900 140 4200 22800 255
90694/750 90694/750 750 1280 315 14340 58590 1309

Characteristic of zinc die casting products:

1. High specific density, more strength than plastic injection molding.

2. Good casting performance, Producing complex shape and Thin-walled precision die casting parts,
the surface of Zinc Die Casting part is smooth.

3. Easy do the surface treatment: Plating, powder coating, Painting.

4. Do not attract iron when Melt and die casting, do not corrosion Zinc Die Casting Mould and Non-stick mold.

5. Have good room temperature mechanical properties and wear resistance.

6. Low melting point, Melts at 385℃, more easily forming than aluminum alloy die-casting molding.


M Domestic commonly used die-casting zinc alloy material performance:

The traditional die-casting zinc alloy: No.2, No.3, No.5, No.7. ZA8 Currently the most widely used is zinc alloy No.3.

The application of commonly used zinc alloy:

No.2: It is used to those mechanical fittings that have special need in mechanical capability, and need high rigidity and normal dimension and precision.

No.3: Good liquidity and mechanical properties, and the best combination of mechanical properties, casting properties and economical. It applied to the die casting part which the mechanical strength requirement is not high. Such as toys, light parts, decorations and part of the electric parts.

No.5: Good fluidity and good mechanical properties, high wear resistance. It applied to the zinc die casting part which has requirements of mechanical strength. Such as auto parts, mechanical and electrical parts, machinery parts, electrical components.

Domestic main zamak chemical composition %

Domestic main Zinc alloy chemical composition

Die-casting zinc alloy mechanical properties

Die casting zinc alloy mechanical properties

The precision of the Zinc Alloy Die Casting: ±0.05mm;

Smoothness of surface of rough part: Ra1.6~Ra3.2;

Shrinkage rate of zinc die casting products: 0.3%;

Material wastage rate: 5%;

General zinc die-casting machining allowance: 0.3mm~0.5mm;

Surface preparation methods: Sand blasted, Shot blasting, Powder coating, Painting, Plating, Electrophoresis, Polishing


The zinc alloy die casting production and QC control

Zinc die casting equipment and QC control

Zinc Die Casting Parts

Zinc Die Casting Parts, Zinc Die Cast, Zinc Alloy Die Casting, Zinc Die Castings, Zamak Die Casting Part, Zamak Injection Part

NINGBO BEILUN LEMA MACHINERY TECHNOLOGY CO.,LTD , http://www.china-lema.com