Rotary Fuel Suction Vane Pump
Waste Rubber Pyrolysis Machine could process kinds of waste rubbers,
like rubbers of sliced tyres, rubbers of old shoes, rubbers of waste rubber products etc.
the total power is 11.5kw-17.5kw each whole set machine.
the oil output will be from 40%-90% or even higher if it is pure rubbers.
the main process is that by heating the reactor directly, rubbers will be pyrolysised into oil gas;
condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;
then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...
there are models with capacities from 5tons to 20tons per batch
LN-2200-6000 capacity of 5-6ton
LN-2200-6600 capacity of 7-8ton
LN-2200-8000 capacity of 9-10ton
LN-2600-6600 capacity of 10-12ton
LN-2600-8000 capacity of 12-14ton
LN-2800-6000 capacity of 10-12ton
LN-2800-6600 capacity of 12-14ton
LN-2800-8000 capacity of 15-20ton
if cut into smaller pieces, it could process more.
Waste Rubber Pyrolysis Machine Waste Rubber Pyrolysis Machine,Rubber Pyrolysis Machine,Scrap Rubber Pyrolysis Machine,Automatical Rubber Pyrolysis Machine Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
Main Features
YB series self-priming rotary vane pump is with by-pass valve built-in. The pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps. The pump has its obvious advantage in the transmission of high flow at low revolution.
Application
Oil tank truck
Fleet refueling.
Lube oil
Aviation refuelers
Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.
Installation
With cardan shaft or hydraulic motor, the pump can be installed on oil tank trucks. And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Equipped with Teflon seals, the pump can also transfer a wide variety of solvent in the petrochemical industry.
Model
Size/Flow Rate/Speed
650 RPM
600RPM
550 RPM
500 RPM
450 RPM
400 RPM
G/min
L/min
G/min
L/min
G/min
L/min
G/min
L/min
G/min
L/min
G/min
L/min
YB-50
50mm/2''
80
300
72
270
64
240
56
210
48
180
40
150
YB-65
65mm/2.5''
132
500
123
465
114
430
103
390
93
350
82
310
YB-80
80mm/3''
265
1000
243
920
222
840
200
760
180
680
160
600
YB-100
100mm/4''
Â
Â
Â
Â
Â
 505
1900
Â
 405
1530
Performance Data
Model
YB-50
YB-65
YB-80
YB-100
Rated Speed
640RPM
640RPM
640RPM
640RPM
Power
HP
3.0
5.0
10
25
KW
2.2
4
7.5
18.5
