Cautions for Use of Tanker Flowmeters (2)
All Fuel Fireplace Stove Chimney
Rainbow Residential Chimney is mostly used for home fireplace and stove. We produce chimney in 5" to 12" diameter with single or double wall.
Double-walled spigot and twist lock chimneys are the most popular among our clients. We have been selling our fireplace chimney to overseas for ten years.
Rainbow chimney has got the CE and UL certificates for this residential chimney.
All Fuel Chimney Pipe,Gas Fireplace Repair,Gas Fireplace Service,Chimney Pipe Dealers Suzhou Rainbow Environmental Equipment Co., Ltd , https://www.rainbowchimney.com
In the process of using the oil tanker, there are many places to pay attention to. Today, the technical staff of the XCMG Chu Sheng Technical Department talks about the use of the flow meter of the oil tanker.
First, in a piping system with a flow meter, it is necessary to avoid generating or entering air, otherwise it will cause inaccurate metering. Therefore, the flowmeter should be used when the entire system is full of oil. Flow meter system precision instrument, the measurement room, the detection element gap is very small. Therefore, large particles and other impurities must not enter the flowmeter. It is forbidden to use the flowmeter without a filter.
Second, the flowmeter must not exceed the specified flow rate and pressure range. In continuous operation, the flow in the pipeline should not exceed 600-800L/min. The maximum flow rate is regulated in order to accommodate the sudden increase in flow and other conditions. Use it for a short time or in a moment. The flowmeter has a zero-return knob on the meter head. Before the work, check whether the count and the pointer are back to zero. After each refueling operation, turn the knob clockwise to return the hands and one count to zero. It is forbidden to move the pointer when the flowmeter is working.
Third, the flowmeter should avoid working under pressure surges and overload surges. Therefore, it is necessary to switch the fuel ball valve and the refueling gun smoothly and slowly during use, and prevent the measured medium from flowing back into the flow meter. When the flow meter is installed, the shaft of the waist wheel should be installed horizontally, and the flow direction through the flow meter should be consistent with the direction indicated by the arrow on the housing; the flow meter should not be subjected to expansion, contraction, deformation and vibration of the pipeline.