Clutch adjustment method detailed analysis of the new driver to learn the high pressure cleaning car
What kind of effect does the clutch of a high pressure cleaning vehicle have? Actually, the clutch is the component that directly communicates between the vehicle generators in the transmission system of the high-pressure cleaning vehicle. The clutch can make the generator's winter and the rotating device can be temporarily separated and joined smoothly, and it can rely on the transfer of the engine. Moments, in this way, it is convenient for the driver of the high pressure cleaning vehicle to perform operations such as shifting, starting, parking, and the like of the vehicle. The clutch of the vehicle may not need to be maintained and maintained as often as other components. In the future use, it is still necessary to check and make adjustments. 1, using a ruler to measure the distance from the floor to the pedal shop, this is the height of the pedal is Chen Wei, that is, A, the standard value is 180.5 mm, if the measured data is inconsistent, then Should be adjusted to the bolt pedal stop, after adjusting it to the standard value can be nut tightening. 2. If the clutch pedal of the high-pressure cleaning vehicle has no free stroke, it will directly cause the clutch to slip. The vehicle will appear weak during the driving process. If the free stroke of the clutch is too large, it cannot make it. Clutch can be completely separated, it will also cause the difficulty of shifting. During the inspection, you can step on the clutch pedal of the high-pressure cleaner until you feel resistance. In this one trip it is the free travel of the clutch pedal. The free travel of the clutch must be within a specified range between 6-13 mm. If it does not meet this value, then you should go to the service station for maintenance. You can use the ruler to measure the free gap of the clutch under the clutch, that is, the B distance, the standard value is between 6-13 mm, if it does not meet this value, it should be to the master cylinder clutch lever Length, after adjusting to the standard value, the top bar lock nut. So usually should be how to maintain a good clutch to reduce the degree of wear and tear? When using the first gear, when the maximum torque at the time of starting is obtained, the overload of the clutch is reduced. It is necessary to reduce the clutch of the high-pressure cleaning vehicle in a semi-linked state. When the clutch is used, the clutch should be completely released after being pressed in the end, so that the clutch can be completely separated and reliably combined. After the vehicle has started successfully, it should be as soon as possible to release the clutch. It is necessary to reduce the pressure of the clutch and the unnecessary rubbing of the pressure plate. (Text / Sun Ni) Retractable Ceiling Fan With LED Light This Retractable Ceiling Fan has LED module which can switch to different color of light, such as warm light 2500 K, natural light 4500 K and cool light 6000 K. Also this retractable ceiling fan has remote control can allow the owner control the light setting and wind speeds on any where in the house. Retractable Ceiling Fan With Light,Retractable Ceiling Fan With Light Kit,Retractable Ceiling Fan With Led,Retractable Ceiling Fan With Led Light ZHONGSHAN UFAN ELECTRIC APPLIANCE CO. LTD , https://www.retractablefan.com