Collectable sprinkler tips
Many users who purchase a sprinkler will ask a question, is there any skill in the process of using the sprinkler, today Xiao Bian will give you a summary of several sprinkler tips for your reference. 1. Requirements for water quality When the sprinkler uses river ditch or pond water as a water source, the end of the suction pipe should be completely submerged in water. In order to avoid inhalation of stones or sediment, drift debris, etc., the suction pipe end is provided with a filtering device, which prohibits filtering when water is sucked. The device is removed. If the water source is not very deep, it is necessary to dig the water absorption deeper in advance to ensure that it does not contain debris and air. Different pumps have different requirements for water sources. With any impurities, the turbid water pump can not have stones and excessive silt in the water. 2. Add water diversion 3. The inlet pipe must be vacuum 4. Parking stalls 5. Winter water release 6. Watering precautions 7. Lubrication and fastening 8. Regular sewage The above is a summary of the eight techniques used, the correct use of the method can not only reduce the failure of the sprinkler, but also improve work efficiency.  Cnc Auto Lathe,Automatic Turning Machine,Automatic Lathe Machine,Auto Lathe Machine Ningbo Leyan Machinery Technology Co., Ltd , https://www.cncleyan.com
Every time the centrifugal pump absorbs water, it is necessary to add a certain amount of water to the pump. After the addition, the water inlet must be closed. When the self-priming pump is used for the first time, it must be remembered to add water. After that, it is not necessary to add water.
Water inlet pipe system must maintain a certain degree of vacuum before the water can be sucked into the box. The inlet pipe system must be sealed reliably, the hose can not be damaged, the hard pipe can not have cracks, otherwise it will have a leakage phenomenon, but also Can cause inability to absorb water.
No matter if the sprinkler is before water absorption or before the water is sprayed, the power take-off device must be stopped while parking.
Before the advent of winter, the water in the water pump and the water pipe should be vented to prevent freezing. The northern part of the country is generally not exposed to severe winter construction. Therefore, after the completion of the construction, the water in the pump and the water pipe should be drained immediately to prevent future accidents.
The position of the front sprinkler of the sprinkler is relatively low, close to the ground, and the spray pressure is large, which can be used to flush the road surface; the rear nozzle is relatively high in position and the sprinkler surface is wide, and can be used for highway construction and water spraying. When using the rear sprinkler, the front nozzle is firstly used. Close; When sprinkling with the adjustable sprinkler, the width of the sprinkler can be adjusted as needed. The wider the sprinkler width, the less the amount of intermediate overlap and the more uniform the sprinkler density.
When using, it is necessary to lubricate the lubrication points of the transmission assembly regularly and tighten the joints to ensure normal operation.
Sprinkler tank with a sewage pipe, the import of the pipe is the lowest point of the tank. After a period of time after use, should be regularly open the sewage pipe switch, the tank debris accumulated until the water becomes clear.