Energy Saving Gas Heating Oven for Powder Coating
Water Based Pigment Paste,Metallic Pigment Paste,Pigment Paste,Water Based Color Paste Kolortek Co., Ltd. , https://www.metallicpigment.com
Curing oven is used to solidify powder coated on workpieces by heating in powder coating system. Haeting method could be Gas, Electric, fuel or others. PCO38002G is gas heating oven with 2 opening for trailers in and out.
Instruction:
Inner size(mm):
3600(L)*2100(W)*2000(H)
Outer size(mm):
3800(L)*2300(W)*2400(H)
Cabin system
Rock wool sandwich panel, 100mm thick. Outside is colorful steel,Â
inside is galvanized steel, anti-flame and heat insulation
Main door
 2 doors on both side for in and out, with auto lift lock
Heating Power
gas
Heating system
One set of gas burner, the max heat capacity 100,000Karl.Â
One set of stainless steel heat exchanger. Need 20-25 minutes
 to reach 180 degrees. Cabinet(rock wool insulation) for the burner&heat chamber*1unitÂ
Control system
1unit,including automatic/constant temperature, stop,Â
emergency stop,start,oven temperature setting, constant temperature setting,
hot air temperature setting,over indicator,failure indicator,normal indicator,
power indicator,pre-work indicator.Â
Guide rail
1 set of guide rail for in and out, 4pcs of wheels (used for making trolley)
Package
Common wooden box package
The thermal insulation box of assembled curing oven (Suitable for all kinds of heating system)
   Videos on youtube:Â
https://www.youtube.com/channel/UCxd2Jzi-91Jg0CDSDQKP0Lg/videos?view=0&sort=dd&shelf_id=0
                                                          Â
Characteristics:
Â
    1,The inside wall of the curing oven is pressure reinforced galvanized steel sheet, which has long life.
The outer wall is pressure groove reinforced electrostatic coating color steel plate, which has beautiful appearance.
    2,The thermal insulation layer adopts the density of 100 kg/cubic meter 100mm rock pressure cotton.
The side wall of the insulation board set the heat residence bridge structure, gives it good heat preservation effect.
   3,Both of the connection of parts and the curing oven insulation box are made by galvanized steel sheet.
There a lots of heat resistance structure on the surface of important connection parts to reduce the heat loss.
   4,Adopts the reasonable assembling structure, the transportation is convenient, the transportation cost is low, the assembling technology is simple, and the heat preservation effect is good.
   5,Gas heating, coal-fire heating and fuel heating curing oven install adjustable air outlet with multiple points uniform cloth, make the airflow in the drying tunnel are reasonable distribution, and the temperature is uniform.
   6,The curing door adopts the locking structure of imitating containers with user-friendly.There are tongue-and-groove baffles around the door,on the edge of door, we set hermetic raised lines, the tightness is good.
   7,The gate lock adopts the patent automatic lifting structure, after unlocking, the lock lever will rise automatically, in order to avoid meeting the rail outside the door when opening the door.
   8,The curing oven can be opened on both sides, in order to facilitate the workpiece turnover, increasing the utilization rate of the curing oven, reduce the no-load rate, to avoid the waste of heat loss.
Qingdao Zhongbang Science and Tech Development Co. Ltd was established in 2005, we are covering design,development and manufacture of electrostatic powder coating equipments. We are National High-Tech enterprise and got 13 technical patents in this fild. Up to the beginning of the year 2016, our products have been exported to  dozens of countries and regions, such as USA,UK,Japan,France,Russia,Balares,Australia,Denmark,Canada,Mexico,Saudi Arabia,Jordan,Armenia,Malaysia,Singapore,Kuwait,Morocco,UAE,Isreal,New Zealand,Macedonia, etc. MA3300D received high praise from every customer.Â
We are not only a good supplier, but also an excellent solution provider and problem solver.