How to adjust gear oil pump gearbox

Gear oil pump gear installed by the demolition of complex, the first move the claw coupling and the claw coupling teeth fixed teeth in the all-toothed position, and then the two fixing bolts in the positioning plate but not unscrew In the event of a fall, insert the alignment pin on the engagement lever assembly into the hole on the side of the gear plate on the rear of the alignment plate. If the long slot on the positioning plate has reached the limit, the positioning pin still can not be inserted into the hole, then re-engage the lever assembly, change the position of its spline, after adjustment, tighten the two positioning plate fixing bolts and Engage the lever assembly fixing bolts. Finally, the lever assembly should be repeatedly pulled several times the lever assembly, the movable claw-shaped coupling should be free to slide from the hole to observe the view, the joint position of the two coupling teeth should be full-tooth meshing, the separation position should be full tooth off.

Sand Casting Parts

Sand casting parts could serve in many industries including hydraulics, automotive, commercial truck, rail trains, logistics, agricultural machinery...etc. The castings mainly are used as gearbox housing, pressure pump housing, engine blocks, cylinder heads, transmission box, bracket, Wheel Hub, connecting rods, manifolds...etc.

Advantages of Sand Casting

✔ Lower Cost due to its cheap and recyclable mold materials and simple production equipment.

✔ Wide range of unit weight from 0.10 kg to 500 kgs or even bigger.

✔ Various Structure from simple type to complex type.

✔ Suitable for production requirements of various quantity

✔ Diverse metals could be cast by sand casting including ferrous metals and non-ferrous metals

✔ Long lifespan of the mold

Resin-Coated Sand Cores

Sand Casting Parts,Sand Casting Engine Parts,Custom Sand Casting,Brass Sand Casting

NINGBO CITY YINZHOU RUICAN MACHINERY CO.,LTD , https://www.ruican-casting.com