Extruder Single Screw Barrel
Electronic equipment refers to equipment consisting of electronic components such as integrated circuits, transistors, and electronic tubes, and uses electronic technology (including) software to function, including electronic computers and robots controlled by electronic computers, numerical control or program control systems, etc., which can be used in almost any In the commercial, household, and industrial fields, the existence of electronic devices has been observed. The increase in the number of transistors of electronic devices has brought about an inevitable high temperature environment. For a reasonable temperature, the extended life of electronic devices can be ensured, and the aging of electrical components can be avoided. Therefore, the heat exchanger of electronic equipment is also the key to solve this problem. At present, the cold plate heat exchanger designed and produced by us is maturely applied in different electronic equipment.
Electronic Heat Exchanger,Electric Heater,Mini Oil Cooler,Compressor After Cooler Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.nl
Extruder Single Screw and Barrel
Specification:
Screw Diameter: Φ 15- Φ 300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and vented type, etc.
Technical Information
Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)
4)9Cr18MOV
5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm: 3mm
Warranty and service: 1 year
Our advantages:
1)Excellent raw materials
2)Good customer service
3)Rapid delivery
4)Reasonable price
5)Production quickly
Experienced manufacture, we will be the best choice.
