High Capacity Gravity Separation Mineral Spiral Separator for Processing Tantalum
 Introduction of Spiral Chute Working Principle of Spiral Chute Our spiral chute is a gravity separation equipment of separation different weight mineral by inertial centrifugal force pulp produced in helix turning motion. 1. Separation Hopper        2. Feeder Trough             3. Spiral Section  1. Reasonable structure and small occupation area. 2. High recovery, high efficiency, and precise separation 3. Non-required power 4. anti corrosion, rust and wear resistant 5. Simple installation and Minimum maintenance requirements. 6. Low operating cost and long working life. 7. Strong adaptability to fluctuation of feeding amount, density, size and grade  Introduction of Spiral Chute Working Principle of Spiral Chute Our spiral chute is a gravity separation equipment of separation different weight mineral by inertial centrifugal force pulp produced in helix turning motion. 1. Separation Hopper        2. Feeder Trough             3. Spiral Section  1. Reasonable structure and small occupation area. 2. High recovery, high efficiency, and precise separation 3. Non-required power 4. anti corrosion, rust and wear resistant 5. Simple installation and Minimum maintenance requirements. 6. Low operating cost and long working life. 7. Strong adaptability to fluctuation of feeding amount, density, size and grade Mobile Asphalt Mixing Plant is a convenient, efficient and mobile asphalt mixture production equipment, which is suitable for all kinds of road construction and maintenance projects. It has the characteristics of strong mobility, quick installation and easy operation, and can provide high quality asphalt mixture for the project and improve the construction efficiency. Recycled Asphalt Mixing Plant,Asphalt Mixing Facilities,Stationary Asphalt Mixing Plant,Asphalt Mixing Facilities Stationary BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockequipment.com
Spiral separator is a new gravity separation machine. With the water and action of gravity friction force, minerals would be separated by the different gravity and get heavy, middling and light products.
Spiral concentrator is made of the fiberglass lined with wear-resistant polyurethnane and corundum cover, with feature of anti corrosion, rust and wear resistant.
It's the most suitable equipment for mining and ore beneficiation, especially for placer mining at seaside, riverside, sand bank and stream bank. It is of low water consumption, small floor area, high concentration and recovery ratio, high adaptability, etc
Application of spiral concentrator
It's applicable to metal and non-metal ores with adequate density difference, like iron, chromite, pyrite, tin ore, tungsten, tantalum, niobium, gold ore, colliery, monazite, rutile and Zirconium.
It can easily adopt to different raw material size, density, ore grade and feed volume. Spiral chute is suitable for treatment of 0.6-0.03mm lode and placer, but high mud content is bad for separation. At present, spiral chute has been widely used in the treatment of iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside placer and gold ore.
2) Deliver the ore slurry to the two feeding opening at top of the spiral chute with the help of sand pump, add supplementary water to adjust slurry thickness.Â
3) Then slurry flows down automatically and rotarily from the top. Ore and sand can be divided under rotary steam and centrifugal force according to the slurry's different specific gravity, grain size and shape.Â
4) Next, final ore flows to the final ore hopper and coveyed out by pipe and picked up, and final sand flows to final sand hopper and coveyed out by pipe to sand pond. Then remove the sand pump. That is the whole concentrating process.
Structure of fiberglass spiral chutes
4. Stand                 5. Ore Receiving Hopper      6. Annular Collecting Hopper
Technical Parameters of Spiral Chute
Spiral chute model
5LL-2000
5LL-1500
5LL-1200
5LL-900
5LL-600
5LL-400
spiral dia(mm)
2300
1500
1200
600
600
400
feeding size (mm)
4-0.04
0.8-0.037
0.3-0.03
0.3-0.03
0.2-0.02
0.2-0.02
feeding density (%)
20-45
25-50
25-55
25-55
25-55
25-55
capacity (T/H)
15-40
6-8
4-6
2-3
0.8-1.2
0.1-0.2
overall size(mm)
2300*2300*6500
1560*1560*5230
1360*1360*5230
1060*1060*4000
700*700*2600
460*460*1500
weight(Kg)
1400
800
600
400
350
140
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crushe
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact
Â
Spiral separator is a new gravity separation machine. With the water and action of gravity friction force, minerals would be separated by the different gravity and get heavy, middling and light products.
Spiral concentrator is made of the fiberglass lined with wear-resistant polyurethnane and corundum cover, with feature of anti corrosion, rust and wear resistant.
It's the most suitable equipment for mining and ore beneficiation, especially for placer mining at seaside, riverside, sand bank and stream bank. It is of low water consumption, small floor area, high concentration and recovery ratio, high adaptability, etc
Application of spiral concentrator
It's applicable to metal and non-metal ores with adequate density difference, like iron, chromite, pyrite, tin ore, tungsten, tantalum, niobium, gold ore, colliery, monazite, rutile and Zirconium.
It can easily adopt to different raw material size, density, ore grade and feed volume. Spiral chute is suitable for treatment of 0.6-0.03mm lode and placer, but high mud content is bad for separation. At present, spiral chute has been widely used in the treatment of iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside placer and gold ore.
2) Deliver the ore slurry to the two feeding opening at top of the spiral chute with the help of sand pump, add supplementary water to adjust slurry thickness.Â
3) Then slurry flows down automatically and rotarily from the top. Ore and sand can be divided under rotary steam and centrifugal force according to the slurry's different specific gravity, grain size and shape.Â
4) Next, final ore flows to the final ore hopper and coveyed out by pipe and picked up, and final sand flows to final sand hopper and coveyed out by pipe to sand pond. Then remove the sand pump. That is the whole concentrating process.
Structure of fiberglass spiral chutes
4. Stand                 5. Ore Receiving Hopper      6. Annular Collecting Hopper
Technical Parameters of Spiral Chute
Spiral chute model
5LL-2000
5LL-1500
5LL-1200
5LL-900
5LL-600
5LL-400
spiral dia(mm)
2300
1500
1200
600
600
400
feeding size (mm)
4-0.04
0.8-0.037
0.3-0.03
0.3-0.03
0.2-0.02
0.2-0.02
feeding density (%)
20-45
25-50
25-55
25-55
25-55
25-55
capacity (T/H)
15-40
6-8
4-6
2-3
0.8-1.2
0.1-0.2
overall size(mm)
2300*2300*6500
1560*1560*5230
1360*1360*5230
1060*1060*4000
700*700*2600
460*460*1500
weight(Kg)
1400
800
600
400
350
140
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crushe
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact
Â
Mobile Asphalt Mixing Plant is mainly composed of mixing host, dosing system, fuel system, support device and dust removal system. Among them, the mixing machine is the core part, which is responsible for mixing various raw materials evenly to produce high-quality asphalt mixture. The dosing system is responsible for adding various raw materials to the mixing machine in a certain proportion. The fuel system powers the entire device, usually using diesel or gasoline. The support unit includes four wheels and a suspension system that allows the device to travel and operate in a variety of terrain conditions. The dust removal system is responsible for collecting dust and exhaust gas generated during the production process to ensure a clean working environment and air quality.
The working process of the mobile asphalt mixing station mainly includes the following steps: First, the various raw materials are prepared and added to the mixing machine through the dosing system. Next, the mixer machine starts to work, mixing the raw materials evenly to produce the asphalt mixture. The asphalt mixture is then transported to the construction site for road paving or maintenance. In the whole process, the operation of the mobile asphalt mixing plant is simple and convenient, and it can be quickly deployed and moved, which greatly improves the construction efficiency.
Compared with the traditional fixed asphalt mixing plant, the mobile asphalt mixing plant has the following advantages: First, it has the characteristics of strong mobility and rapid deployment, and can adapt to a variety of complex terrain and construction environment. Secondly, the installation and disassembly of the mobile asphalt mixing plant is very convenient, and the transfer and installation of the equipment can be quickly completed, reducing the construction time. In addition, the operation of the mobile asphalt mixing plant is simple and easy to maintain, reducing the skill requirements of the operator and maintenance costs.
In short, the mobile asphalt mixing plant is an efficient, convenient and mobile asphalt mixture production equipment, which is suitable for all kinds of road construction and maintenance projects. It has many advantages, can provide high quality asphalt mixture for engineering, improve construction efficiency, and has a wide range of application prospects.