High Frequency Sand Washing and Recycling Machine
Percussion drilling is a manual drilling technique in which a heavy cutting or hammering bit attached to a rope or cable is lowered in the open hole or inside a temporary casing. The technique is often also referred to as 'Cable tool'. Usually a tripod is used to support the tools. By moving the rope or cable up and down, the cutting or hammering bit loosens the soil or consolidated rock in the borehole, which is then extracted later by using a bailer. Just as with hand augering, a temporary casing of steel or plastic may be used to prevent the hole from collapsing. When the permanent well screen and casing are installed, this temporary casing has to be removed.
The percussion borehole Drilling Rig's technical advantages:
- Unlike any other drilling method, percussion can remove boulders and break harder formations, effectively and quickly through most types of earth. Hydraulic Engineering Percussion Rig Hydraulic Engineering Percussion Rig,Big Cable Percussion Drilling Rig,Large Diameter Construction Percussion Rig,Truck Mounted Percussion Drilling Rig Henan YikYui Prospecting Machinery Co., Ltd , https://www.yikyui-rig.com
Brief introduction
LZ sand washing & recycling machine is based on sand washer and sand recycling system main tech, we
make it a compact multiple function sand washer. It is widely used for crushed sand, river sand, lake sand
or sea sand washing, screening, recycling and dewatering.
Working principle
*Washing: The bucket is driven by the motor through the reducer and rotates in circle. There are many
sand storage web grooves and bucket screen for sand storage and primary dewatering. When the bucket
moves, sand can be put out by sand storage web groove after being cleaned in the cleaning tank and
primary dewatered on the bucket screen.
*Recycling: Flowing slurry water is extracted by slurry pump, fine sand is collected by the centrifugal force
of the cyclone, then fed to the polyurathane screen from the apex spray. The 0.16-3mm fine sand and
water are efficiently separated through the vibration screen.Â
*Dewatering: coarse sand (3-10mm) and fine sand (0.16-3mm) are fed onto polyurathane vibrating
screen for dewatering.
Features
1.Higher sand quality, lower moisture content.
2.Recycled fine size 0.16-3mm sand, lower mud content.
3.Compact structure, multiple functions, easy install, convenient maintenance, small occupation area.
4.High capacity, after this machine 95% sand can be washed.
5.Solve sedimentation tank cleaning problem, higher economical profit.
Tech specifications
Model
Power (kw)
Specs (mm)
Feed size (mm)
SandProduction(t/h)
Water(m³/h)
Weight(t)
Overall Dimension (LxWxH)(mm)
LZ26-35
23.5
350
≤10
30-50
50-80
6.18
5900×2000×2650
LZ26-55
27
550
≤10
40-60
60-130
6.68
6300×2000×2650
LZ30-60
37.9
650
≤10
80-130
70-150
9.3
7500×2500×3000
LZ30-65
56.4
750
≤10
100-120
150-200
9.95
7500×2500×3000
Brief introduction
LZ sand washing & recycling machine is based on sand washer and sand recycling system main tech, we
make it a compact multiple function sand washer. It is widely used for crushed sand, river sand, lake sand
or sea sand washing, screening, recycling and dewatering.
Working principle
*Washing: The bucket is driven by the motor through the reducer and rotates in circle. There are many
sand storage web grooves and bucket screen for sand storage and primary dewatering. When the bucket
moves, sand can be put out by sand storage web groove after being cleaned in the cleaning tank and
primary dewatered on the bucket screen.
*Recycling: Flowing slurry water is extracted by slurry pump, fine sand is collected by the centrifugal force
of the cyclone, then fed to the polyurathane screen from the apex spray. The 0.16-3mm fine sand and
water are efficiently separated through the vibration screen.Â
*Dewatering: coarse sand (3-10mm) and fine sand (0.16-3mm) are fed onto polyurathane vibrating
screen for dewatering.
Features
1.Higher sand quality, lower moisture content.
2.Recycled fine size 0.16-3mm sand, lower mud content.
3.Compact structure, multiple functions, easy install, convenient maintenance, small occupation area.
4.High capacity, after this machine 95% sand can be washed.
5.Solve sedimentation tank cleaning problem, higher economical profit.
Tech specifications
Model
Power (kw)
Specs (mm)
Feed size (mm)
SandProduction(t/h)
Water(m³/h)
Weight(t)
Overall Dimension (LxWxH)(mm)
LZ26-35
23.5
350
≤10
30-50
50-80
6.18
5900×2000×2650
LZ26-55
27
550
≤10
40-60
60-130
6.68
6300×2000×2650
LZ30-60
37.9
650
≤10
80-130
70-150
9.3
7500×2500×3000
LZ30-65
56.4
750
≤10
100-120
150-200
9.95
7500×2500×3000
- Percussion drilling can in principle deal with most ground conditions.
- Can drill hundreds of feet (one well hand-drilled in China in 1923 was over 4000 feet deep).
- Can drill further into the water table than dug wells, even drilling past one water table to reach another.