High Quality Sewage Treatment Plant Mechanical Sand Filter
T10 Belt Fastener can apply to a variety of conveyor belts, the width of which vary from 7.5mm to 16mm. It is suitable for linking the deep-trough conveyor belts of which the groove angle is over 45 degree. With the interlaced structure of the pin body, the density of the fasteners is greatly lowered. And the fasteners are directly embedded into the pin body, which makes it durable and resistant to abrasion.
Size
T10/22#
T10/24#
T10/26#
T10/28#
The Thickness of the Conveyor Belt
7.5-9.5mm
10-12mm
12-14mm
14-16mm
The Strength of the Conveyor Belt
≦1000
≦1250
≦1400
≦1600
T10 Belt Fastener Matches with T10,Equipped with Lever Devices,T10 Manual Installation Tool,Fastener Installation Tools 7.5-9.5mm Huozhou Coal and Electricity Group Bailong Industry and Trade Co., Ltd. , https://www.hltransportbeltbuckle.com
Our company has developed the integration of energy-efficient water treatment equipment.
1. An aeration part: Without aeration pond and aeration tower does not require dosage pharmaceutical and catalyst, and only raise a small amount of air, lower operating costs.
2, the device main part of a strong oxidizing reaction separation Desander, the grouping suspension filter pool and process one device, the unique structure.
3, part of the filter: The filter with internal backwash device itself, do not need to configure the backwash pump and backwash the pool, you can reduce the project covers an area, reduce engineering investment.
4, pressure filter backwash, high strength, so that the filter layer to flush evenly and thoroughly without the formation of dead ends, recoil a short time, filter cycle is long, and extend filter life.
5, the device can be directly to the user water supply pipe network, without with clear water tank and two pumping stations, reducing equipment investment and to avoid secondary pollution.
Application&Principle
Groundwater in addition to iron and manganese filter is mainly applied in the high-speed rail high and fierce regional groundwater iron and manganese removal, industrial demineralized water, in addition to saline pretreatment. The device uses the aeration oxidation catalysis of manganese sand, adsorption, filtering in addition to iron in addition to manganese principle, the use of aerators oxygen in the air will water of Fe2 + and of Mn2 + oxidation into water-insoluble of Fe3 + and MnO2 was, in the combination of natural manganese sand catalysis, adsorption, filtration to remove iron and manganese ions in water.
Iron and manganese oxidation reaction as follows:
Iron oxide: Air: 4Fe2 + +3 O2 +6 H2O = 4Fe (OH) 3 ↓
Manganese sand of MnO Mn2O7 + Fe2 + +2 O2 +6 H2O = 3MnO2 +4 Fe (OH) 3 ↓
Manganese oxide: Mn2 + + O2 = MnO2 was ↓
Manganese sand Mn2 + + MnO2 was · H2O = MnO2 was MnOH2O +2 H +
Technical parameters for 6 cubic meter/hour mechanical filter
Flow rate(processing capacity): 6 m3/hour
Main tank(cylinder): Φ 750*H1900 (mm)
Upper dish head: Φ 750 mm
Bottom dish head: Φ 750 mm
Electric butterfly valve: DN50(2'')
Face piping: DN50 (2'')
Technical parameters:
model
Filter diameter
Height
inlet-outlet
filtration area
capacity
mm
mm
mm
m²
m³/hour
YL-SF-500
500
816
40
0.2
6~10
YL-SF-600
600
874
40
0.28
8~14
YL-SF-700
700
900
40
0.38
12~19
YL-SF-800
800
960
DN50
0.50
15-25
YL-SF-1000
1000
1200
DN50
0.79
23-39
YL-SF-1200
1200
1400
DN80
1.13
33-55
YL-SF-1400
1400
1600
DN100
1.54
45-75
YL-SF-1600
1600
1800
DN100
2.01
60-100
YL-SF-1800
1800
1950
DN150
2.54
75-125
YL-SF-2000
2000
2150
DN150
3.14
95-155
YL-SF-2200
2200
2250
DN150
3.80
115-190
YL-SF-2400
2400
2100
DN150
4.52
130-210
YL-SF-2600
2600
2400
DN150
5.30
145-225
YL-SF-2800
2800
2500
DN200
6.15
155-240
YL-SF-3000
3000
2600
DN200
7.00
170-255
YL-SF-3200
3200
2800
DN250
8.15
270-320
Our company has developed the integration of energy-efficient water treatment equipment.
1. An aeration part: Without aeration pond and aeration tower does not require dosage pharmaceutical and catalyst, and only raise a small amount of air, lower operating costs.
2, the device main part of a strong oxidizing reaction separation Desander, the grouping suspension filter pool and process one device, the unique structure.
3, part of the filter: The filter with internal backwash device itself, do not need to configure the backwash pump and backwash the pool, you can reduce the project covers an area, reduce engineering investment.
4, pressure filter backwash, high strength, so that the filter layer to flush evenly and thoroughly without the formation of dead ends, recoil a short time, filter cycle is long, and extend filter life.
5, the device can be directly to the user water supply pipe network, without with clear water tank and two pumping stations, reducing equipment investment and to avoid secondary pollution.
Application&Principle
Groundwater in addition to iron and manganese filter is mainly applied in the high-speed rail high and fierce regional groundwater iron and manganese removal, industrial demineralized water, in addition to saline pretreatment. The device uses the aeration oxidation catalysis of manganese sand, adsorption, filtering in addition to iron in addition to manganese principle, the use of aerators oxygen in the air will water of Fe2 + and of Mn2 + oxidation into water-insoluble of Fe3 + and MnO2 was, in the combination of natural manganese sand catalysis, adsorption, filtration to remove iron and manganese ions in water.
Iron and manganese oxidation reaction as follows:
Iron oxide: Air: 4Fe2 + +3 O2 +6 H2O = 4Fe (OH) 3 ↓
Manganese sand of MnO Mn2O7 + Fe2 + +2 O2 +6 H2O = 3MnO2 +4 Fe (OH) 3 ↓
Manganese oxide: Mn2 + + O2 = MnO2 was ↓
Manganese sand Mn2 + + MnO2 was · H2O = MnO2 was MnOH2O +2 H +
Technical parameters for 6 cubic meter/hour mechanical filter
Flow rate(processing capacity): 6 m3/hour
Main tank(cylinder): Φ 750*H1900 (mm)
Upper dish head: Φ 750 mm
Bottom dish head: Φ 750 mm
Electric butterfly valve: DN50(2'')
Face piping: DN50 (2'')
Technical parameters:
model
Filter diameter
Height
inlet-outlet
filtration area
capacity
mm
mm
mm
m²
m³/hour
YL-SF-500
500
816
40
0.2
6~10
YL-SF-600
600
874
40
0.28
8~14
YL-SF-700
700
900
40
0.38
12~19
YL-SF-800
800
960
DN50
0.50
15-25
YL-SF-1000
1000
1200
DN50
0.79
23-39
YL-SF-1200
1200
1400
DN80
1.13
33-55
YL-SF-1400
1400
1600
DN100
1.54
45-75
YL-SF-1600
1600
1800
DN100
2.01
60-100
YL-SF-1800
1800
1950
DN150
2.54
75-125
YL-SF-2000
2000
2150
DN150
3.14
95-155
YL-SF-2200
2200
2250
DN150
3.80
115-190
YL-SF-2400
2400
2100
DN150
4.52
130-210
YL-SF-2600
2600
2400
DN150
5.30
145-225
YL-SF-2800
2800
2500
DN200
6.15
155-240
YL-SF-3000
3000
2600
DN200
7.00
170-255
YL-SF-3200
3200
2800
DN250
8.15
270-320
