Hongyan Heavy Trucks Holds Spring Thunder Action Chengdu Training Seminar to Launch Chuanchuan Tour Promotion
Open rubber and plastic mixing is the rubber factory used to prepare plastic rubber, rubber or hot refining, a type of roller exposed rubber refining machinery. This machine is suitable for EVA,rubber,synthetic rubber,hot melt and all kinds of chemistry raw material to mix ,mediate and disperse, and then put into the mass production. It is the best choice to test, make sample and learning in school.
16inch automatic crusher mill
Advantage
1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.
2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.
3. Self-aligning bearing is well matching with the bearing inside leakage-proof device. The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.
4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.
5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.
6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload. The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.
7. The [U" shape frame is whole set casting, but other factory welded together.
8. The machine base is welded by national standard I steel.
Main parameter
Name
A Automatic crusher mill
Front roller diameter (mm)(Smooth roller)
400
Rear roler diameter (mm)(Groove roller)
450
Roller length(mm)
840
Front roller speed (m/min)
12.67
Speed ratio
1:1.63
Max roller gap(mm)
10
Nip adjustment
Manual
Mixing capacity(kg)
20
Power (kw)
45-8
Motor RPM(r/min)
740
Reducer ratio
45
Reducer model
315
Roller bearing diameter(mm)
260
Bearing mode
352952YA
Bearing size(mm)
360×260×150
Name
B mixing mill
(mm) Front roller diameter(smooth roller)
400
Rear roller diameter (mm)(smooth roller)
400
Roller length(mm)
840
Front roller working speed (m/min)
19.36
Speed ratio
1:1.5
Max roller gap(mm)
10
Nip adjustment
Manual
Mixing capacity(kg)
20
Power (kw)
37KW
Motor RPM(r/min)
980
Reducer ratio
45
Reducer model
315
Roller bearing diameter(mm)
260
Bearing model
352952YA
Bearing size(mm)
360×260×150
Mixing Mill Manchine,Open Mill,Rubber Mixing Mill,Roller Mill SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com
Following the strong response from the “Hongyan•Chunlei Action†product promotion meeting of SAIC Iveco Hongyan Company in most parts of Sichuan, the Chengdu Sales Service Center recently held a large-scale “Red Rock • Spring Thunder Action†Chengdu training in Shuangliu. At the closing meeting, more than 100 dealers and refitting plant representatives from Sichuan attended the exchange.
At the meeting, the marketing director of Hongyan Sales Division first introduced the 2011 marketing requirements and plans. Afterwards, the general manager of Hongyan Chengdu Sales Service Center summarized the promotion meeting of Hongyan•Chunlei Action Products held in Sichuan and thanked the participating dealers and remodeling plants for their support for this product promotion conference, making Hongyan• The Spring Thunder Action has promoted the sales performance of Sichuan products. In the end, the "Golden Lion Star" medals and prizes were awarded to the sales champion of Hongyan Jieshi in the first quarter of 2011. 
In addition, relevant personnel from the Chengdu Regional Refitting Plant also gave explanations on their respective products. The resource management personnel of Chengdu Sales and Service Center made a summary and requirements for the recent resources. Sales Department staff of the after-sales service department vividly explained the common problems and precautions of the regional main sales model, which caused great repercussions from the attendees, raised questions and answers, discussed each other, and had a lively and harmonious atmosphere.
The success of the Hongyan • Spring Thunder operation in the Chengdu area not only rooted in the good image of the Red Rock heavy truck in the eyes of users, but also consolidated the excellent performance and driving comfort of the Hongyan Jieshi C100. During the event, the relevant promotional policies given by Hongyan Company made the market sales reverberate greatly. The event set 20 cars a day, and the order of Hongyan Jieshi C100 has been greatly improved.
According to reports, in accordance with the overall plan and requirements of SAIC Iveco Hongyan's headquarters, Chengdu Sales and Service Center will further plough the regional market. It is expected that the follow-up marketing of Chuanchuan Exhibition will be launched in June 2011 to solidify the market base of Hongyan heavy truck market in Sichuan Province and to seize the share of its own weak models.