ISO High Quality Laboratory Burning Tester Battery Combustion Tester
Car Air Purifier,Car Air Cleaner,Portable Air Cleaner,Portable Car Air Purifier Leeyo Pilot Electric Technology Co., Ltd , https://www.leeyo-pilot.com
Application Â
Battery Burning Tester is suitable for lithium battery , battery pack, mobile phone, notebook computer and other small electronic consumer products battery fire resistance/flammability testing. Â The main function is to observe a series changes and the impact force size produced by exploding after being heated by flames.
Working principle description(High quality laboratory burning tester battery combustion tester)
1.Because of the certain danger of burning test, in order to protect, all the operation of this test should be tested in the room separated from the observer.
2.When do flame exposure test, the test sample cell or battery should be placed on a small wire net horizontally covered by the test base. Before the test, adjust the position of the burner make the wire mesh on the above 38.1mm from the burner. After adjusting the location, ignite the flame, when the steel wire mesh is red, use crucible clamp to hold the test sample and place it on the wire mesh to burn until the battery explode or burn down. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
3.When do particles burning test, first remove the octagon protection cover and the top cover, put the test sample cell or battery on the wire net on the test base , adjust the gas and air flow rate, make the burner produces bright blue flame and the steel wire net burning into bright red (approximately about 700 ºC), place the gauze screen according standard requirement(the gauze screen prepared test handle preson), burning until lithium battery explosion or burn down.
                          Â
4.When do projectile test, It is required that cover the octagon protection cover and the top cover on the sample. The sample is placed on the steel wire net on the top of the test base, heating the sample until the sample explode or the lithium burn down. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Basic fuction (High quality laboratory burning tester battery combustion tester)
2. Burning particles testÂ
3. Ejectisome test
4. Projectile test
5. Explosion test                                          Â
6. Electronic ignition function                                        Â
7. Explosion-proof. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
8. Timing
Products image(High quality laboratory burning tester battery combustion tester)
Specification(High quality laboratory burning tester battery combustion tester)
Â
Model
LJ-5880
LJ-5880A
LJ-5880B
LJ-5880C
Burner
The UL burner,caliber diameter 9.5mm or 38mm,  length  100 mm
Flaming combustion time
0~ 999,999 seconds ±0.1second
Flame height
10~75±2mm
Testing Cover Width
 24″(610mm) , octagon shape(could be customized)
Test cover highly
12″(305mm) (could be customized)
Ignition devices
Automatic ignition (remote control type control 8 meters of less than effective)
Burning gasÂ
Propane gas, Liquefied petroleum gas or methane
Mesh Material
Stainless steel
Working temperature range
0ºC~40ºC
Power supply
ACÂ 220V/50HZ
Consumption
≤300W
Fuse
3A
Safety indicators
Insulation resistance: shell, power input terminal are greater than 2MΩ.
Pressure resistance: 1 seconds resistance voltage 1750VÂ
between the input  power supply and the shell, whole current 10mAGrounding: the power grounding electrode, the resistance betweenÂ
the shells is less than 0.1Ω
Fire extinguisher
manual CO2 fire extinguisher
Customized service
Welcome to Non-standard,Specail requirements,OEM/ODM orders.
Standards:
SJ/T11170-1998; SJ/T11169-1998; UL1642-2009, UL2054:2008; UL1642:1995; UN38.3
Our Factory
Short introduction about LIK factory:
We are a long history testing equipment manufacturer, in the past 10 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine and battery test equipment. In the research and development of the non-standard dynamic environment chamber, LIK is in the leading position in the industry and we have got more than 30pcs patents.Â
LIK main test equipments:
Environmental test chambers, temperature (humidity) chamber,Thermal shock chamber, High low temperature test chamber, Salt spray test chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in constant temperature and humidity test chamber,Vacuum oven, Drying Cabinet, electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber, Powe battery crush and puncture test machine, Battery shock impact test machine, Battery Squeeze test machine, battery short circuit tester, Battery burning jet test equipment, Battery needling/nail punture/acupuncture test machine, etc.
Our Service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. We accept on-site service If customers require.
1. Pre-service
24 Hours online service for your consult.Â
Help choose right model, and a series of service, person, advise. Main web site: http://en.lik.net.cn/
1) More than 10 years manufacturer experience in test equipments and with strong research and development team.Â
2) Acceptable customization for all kinds of specical specification products.
3) We value the inquiry sent to us timely, ensure quick and competitive offer.
4) We put your order into our tight production schedule,ensure your punctual delivery time.
5) We are a sales team, with more than 10 years experience, more professional and reliable
6) Our professional team could provide the best suggestion as long as you tell us what kind of test you need to do and the                  required specification.
7) Welcome to view our factory at any moment .
2. After sale service
1) We deal with your complains within 24 hours and  solution provide within 3 working days.
2) Trainning how to instal the machine, training how to use the machine. We would offer operation video and English operation muanual. We can provide video-con.
3) 1Â year warranty service and all life maintenancee; our engineers could go to your place for better service necessarily.
4) All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be dedicated to provide high  quality service and products for you.
3. Commitment:Â
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.Â
5. Good Packaging:Â
Good Packaging: All goods are covered with film and air bubble film before put them into the strong wooden case.
FAQ
Why choose us?
Q1 :Â Can you customize the product?
A:Â Â Yes, we can customize any products according to requirements.Hot selling lab electronic
      temperature humidity cabinet/Environmental climate test chamber also can be customized.
Â
Q2 :Â How to choose the most suitable products?
A:Â Â Â Our professional team will give you the best suggestion,just be patiently to tell us the information
       about the parameters your required.
Q3 :Â Can you arrange installations and commissioning in our lab?
A:Â Â Firstly, for standard chamber we had 3-5 days commissioning before shipping ,
     you just need link power in your lab, then can start to operate.
     Secondly,  we had detailed operation manual with chamber , any problems you can
                      find and solve in it.
     Thirdly,  some of customized chambers we should to install and teach your team to operate .
Â
How to Contact Us?
Please Send your inquiry Details in the below Or send to my mail below directly. We promise reply your inquiry on time.Â
Application Â
Battery Burning Tester is suitable for lithium battery , battery pack, mobile phone, notebook computer and other small electronic consumer products battery fire resistance/flammability testing. Â The main function is to observe a series changes and the impact force size produced by exploding after being heated by flames.
Working principle description(High quality laboratory burning tester battery combustion tester)
1.Because of the certain danger of burning test, in order to protect, all the operation of this test should be tested in the room separated from the observer.
2.When do flame exposure test, the test sample cell or battery should be placed on a small wire net horizontally covered by the test base. Before the test, adjust the position of the burner make the wire mesh on the above 38.1mm from the burner. After adjusting the location, ignite the flame, when the steel wire mesh is red, use crucible clamp to hold the test sample and place it on the wire mesh to burn until the battery explode or burn down. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
3.When do particles burning test, first remove the octagon protection cover and the top cover, put the test sample cell or battery on the wire net on the test base , adjust the gas and air flow rate, make the burner produces bright blue flame and the steel wire net burning into bright red (approximately about 700 ºC), place the gauze screen according standard requirement(the gauze screen prepared test handle preson), burning until lithium battery explosion or burn down.
                          Â
4.When do projectile test, It is required that cover the octagon protection cover and the top cover on the sample. The sample is placed on the steel wire net on the top of the test base, heating the sample until the sample explode or the lithium burn down. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Basic fuction (High quality laboratory burning tester battery combustion tester)
2. Burning particles testÂ
3. Ejectisome test
4. Projectile test
5. Explosion test                                          Â
6. Electronic ignition function                                        Â
7. Explosion-proof. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
8. Timing
Products image(High quality laboratory burning tester battery combustion tester)
Specification(High quality laboratory burning tester battery combustion tester)
Â
Model
LJ-5880
LJ-5880A
LJ-5880B
LJ-5880C
Burner
The UL burner,caliber diameter 9.5mm or 38mm,  length  100 mm
Flaming combustion time
0~ 999,999 seconds ±0.1second
Flame height
10~75±2mm
Testing Cover Width
 24″(610mm) , octagon shape(could be customized)
Test cover highly
12″(305mm) (could be customized)
Ignition devices
Automatic ignition (remote control type control 8 meters of less than effective)
Burning gasÂ
Propane gas, Liquefied petroleum gas or methane
Mesh Material
Stainless steel
Working temperature range
0ºC~40ºC
Power supply
ACÂ 220V/50HZ
Consumption
≤300W
Fuse
3A
Safety indicators
Insulation resistance: shell, power input terminal are greater than 2MΩ.
Pressure resistance: 1 seconds resistance voltage 1750VÂ
between the input  power supply and the shell, whole current 10mAGrounding: the power grounding electrode, the resistance betweenÂ
the shells is less than 0.1Ω
Fire extinguisher
manual CO2 fire extinguisher
Customized service
Welcome to Non-standard,Specail requirements,OEM/ODM orders.
Standards:
SJ/T11170-1998; SJ/T11169-1998; UL1642-2009, UL2054:2008; UL1642:1995; UN38.3
Our Factory
Short introduction about LIK factory:
We are a long history testing equipment manufacturer, in the past 10 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine and battery test equipment. In the research and development of the non-standard dynamic environment chamber, LIK is in the leading position in the industry and we have got more than 30pcs patents.Â
LIK main test equipments:
Environmental test chambers, temperature (humidity) chamber,Thermal shock chamber, High low temperature test chamber, Salt spray test chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in constant temperature and humidity test chamber,Vacuum oven, Drying Cabinet, electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber, Powe battery crush and puncture test machine, Battery shock impact test machine, Battery Squeeze test machine, battery short circuit tester, Battery burning jet test equipment, Battery needling/nail punture/acupuncture test machine, etc.
Our Service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. We accept on-site service If customers require.
1. Pre-service
24 Hours online service for your consult.Â
Help choose right model, and a series of service, person, advise. Main web site: http://en.lik.net.cn/
1) More than 10 years manufacturer experience in test equipments and with strong research and development team.Â
2) Acceptable customization for all kinds of specical specification products.
3) We value the inquiry sent to us timely, ensure quick and competitive offer.
4) We put your order into our tight production schedule,ensure your punctual delivery time.
5) We are a sales team, with more than 10 years experience, more professional and reliable
6) Our professional team could provide the best suggestion as long as you tell us what kind of test you need to do and the                  required specification.
7) Welcome to view our factory at any moment .
2. After sale service
1) We deal with your complains within 24 hours and  solution provide within 3 working days.
2) Trainning how to instal the machine, training how to use the machine. We would offer operation video and English operation muanual. We can provide video-con.
3) 1Â year warranty service and all life maintenancee; our engineers could go to your place for better service necessarily.
4) All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be dedicated to provide high  quality service and products for you.
3. Commitment:Â
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.Â
5. Good Packaging:Â
Good Packaging: All goods are covered with film and air bubble film before put them into the strong wooden case.
FAQ
Why choose us?
Q1 :Â Can you customize the product?
A:Â Â Yes, we can customize any products according to requirements.Hot selling lab electronic
      temperature humidity cabinet/Environmental climate test chamber also can be customized.
Â
Q2 :Â How to choose the most suitable products?
A:Â Â Â Our professional team will give you the best suggestion,just be patiently to tell us the information
       about the parameters your required.
Q3 :Â Can you arrange installations and commissioning in our lab?
A:Â Â Firstly, for standard chamber we had 3-5 days commissioning before shipping ,
     you just need link power in your lab, then can start to operate.
     Secondly,  we had detailed operation manual with chamber , any problems you can
                      find and solve in it.
     Thirdly,  some of customized chambers we should to install and teach your team to operate .
Â
How to Contact Us?
Please Send your inquiry Details in the below Or send to my mail below directly. We promise reply your inquiry on time.Â