Maintenance Work for Infant Cars

Just like parents of parents who had just started their parents, when the children just arrived, they were always overwhelmed by the overwhelming enthusiasm of their care. The high-altitude vehicle manufacturers reminded them that infancy maintenance of aerial vehicles is actually the easiest. Because this period is generally in the factory. In the package period (generally within 60,000 kilometers of 2 years), maintenance during this period is mainly based on the time and mileage specified by the manufacturer at regular and fixed intervals. The maintenance contents basically include the replacement of “three oils and one filter” (oil , engine oil grid, gas grid, air grid). As for the replacement time, mileage and project, each model manufacturers have different recommendations, consumers simply follow the instructions for use on it.

About 30,000 kilometers of aerial vehicles, to consider the replacement of spark plugs (some manufacturers shorter time requirements), the life of spark plugs are often not felt by consumers, but the spark plug as a wearing part has been much less effective than before. When the 15,000 km is recommended, the owner should clean the combustion chamber, fuel injectors, throttle, inlet, etc. to help maintain full combustion.

High-altitude truck manufacturers : It is best not to go outside the designated area of ​​the factory during the Three Guarantees period. All liquids (including engine oil, brake oil, etc.) that are replaced must use the brand specified by the manufacturer. Otherwise, the manufacturers will not be given the three-pack period. The claims service, in case of problems, is not worth the candle.

Integrated Design Batch Waste Tyre Pyrolysis Plant

Intergrated Design Batch Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flowchat of Batch Waste Tyre Pyrolysis Plant

Advantages of Batch Waste Tyre Pyrolysis Plant

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

Integrated Batch Waste Tyre Pyrolysis Plant,Integrated Movable Waste Tyre Pyrolysis Plant,Large Capacity Used Tires Pyrolysis Plant,Integrated Batch Used Tyre Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl