Preform Mould Supplier (32 cavities)
The Snoworld land use fresh water flake ice production capacity ranges from 0.5 ton/day to 30 ton/day. Based on the application scenario and local site condition, we are providing different condensing type and different material for customer`s benefit. The models and data are as followed.
Unit
Performance Parameters
Nominal Production
Installed power
Ice outlet dimension
L
W
H
Net weight
t/24h
kw
Ømm
mm
mm
mm
kg
F050A
0.5
2.3
375
1200
735
639
210
F075A
0.75
2.6
375
1200
735
684
230
F10A
1
4.1
375
1200
735
825
250
F12A
1.2
4.6
375
1410
935
825
260
F16A
1.6
7.2
510
1490
1180
935
350
F20A
2
8.4
510
1490
1180
1009
450
F25A
2.5
9.1
510
1490
1180
1069
480
F30A
3
9.7
510
1840
1530
1165
800
F30W
3
9.5
510
2000
1000
1184
1100
F50W
5
15.7
710
2685
1100
1471
1500
F60W
6
19.6
710
2685
1100
1471
1600
F80W
8
24.2
920
3135
1160
1746
2200
F100W
10
29.4
920
3216
1160
2006
3000
F150W
15
47.1
1277
3840
1750
2260
4500
F200W
20
56.4
1420
4255
1950
2954
5500
F250W
25
76.1
1790
5116
2050
3137
7500
F300W
30
100
1790
5116
2050
3277
8000
Unit
Performance Parameters
Nominal Production
Installed power
Ice outlet dimension
L
W
H
Net weight
Model
Condensing Type
t/24h
kw
Ømm
mm
mm
mm
kg
F050A
Air-cooling
0.5
2.3
375
1200
735
639
210
F075A
0.75
2.6
375
1200
735
684
230
F10A
1
4.1
375
1200
735
825
250
F12A
1.2
4.6
375
1410
935
825
260
F16A
1.6
7.2
510
1490
1180
935
350
F20A
2
8.4
510
1490
1180
1009
450
F25A
2.5
9.1
510
1490
1180
1069
480
F30A
3
9.7
510
1840
1530
1165
800
F30W
Water-cooling
3
9.5
510
2000
1000
1184
1100
F50W
5
15.7
710
2685
1100
1471
1500
F60W
6
19.6
710
2685
1100
1471
1600
F80W
8
24.2
920
3135
1160
1746
2200
F100W
10
29.4
920
3216
1160
2006
3000
F150W
15
47.1
1277
3840
1750
2260
4500
F200W
20
56.4
1420
4255
1950
2954
5500
F250W
25
76.1
1790
5116
2050
3137
7500
F300W
30
100
1790
5116
2050
3277
8000
Flake Ice Maker,Snowkey Flake Ice Machine,Fresh Water Flake Ice Machine,1 Ton Flake Ice Machine Fujian Snowman Trade Co., Ltd. , https://www.sinoicemachine.com
1. Usually, Multi-cavity pet preform mould does use the hot runner system rather than cold runner system, so the design of hot runner system plays an important role in mould quality guarantee. Based on foreign advanced techniques and combined with domestic clients demand, we adopt the valve gated design, in which each cavity has its own heating zone and temperature is measured by independent thermocouple. (advantages: Easily avoid some problems such as white or draw bench on bottom). Here, Mould is produced automatically to reduce labor force.
Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45). In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max. Part and min. Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)
2. Our mould, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.10mm; Weight difference is less than 0.3G; 2-5 moulds per minute; Utmost 144 cavities in one mould.
Main feature:
Cavity from 1 up to 144.
Control system with simulating stretch testing improve rate of production.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentrically.
4. Material of mould die core and die cavity are made of Sweden S136 special mould steel.
5. Standard screw neck, imported nitride steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 2 million shots guarantee.
