R-80 Series Roller Vibrator
Square Tubing Aluminum,Aluminium Square Tube Profiles,Aluminum Profile Tube,Square Tube Aluminium Profile Guangdong Huachang Group Co., Ltd. , https://www.wacangaluminium.com
Body made trom an extruded aluminum, refined steel roll in which the scrolling. This steel roller by the two special high--impact plastic coer positioning. The houseing has two horizontal and two vertical holes, making in stallation easy. Air into two mutually perpendicular intake of an entry. The two air intakes for the standard pipe thread. Is not a block intake, supplied with a pipe plug.
R series pneumatic roller of high frequency vibrator is suitable for the vibration of liquid powder, filling and handling purposes. Because it is a gas transmission, so the vibration frequency to adjust the pressure to achieve control. Mainly used for: Hopper discharge is phlogistic, stir - powder material conveying powder, the mold plastic and compaction of concrete.
Technical parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
R-50
25.150
35.150
36.150
1.175
2.955
4.255
1.550
1.450
1.950
R-65
19.150
21.150
26.150
2.755
4.855
6.1550
2.150
3.100
4.150
R-80
15.650
18.650
19.150
3.150
6.125
7.450
4.500
4.350
5.750
R-100
11.050
14.150
15.150
3.765
6.750
8.955
5.600
5.550
7.350
This small pneumatic vibator design is simple, but still gives a strong centrifugal force.
Body made trom an extruded aluminum, refined steel roll in which the scrolling. This steel roller by the two special high--impact plastic coer positioning. The houseing has two horizontal and two vertical holes, making in stallation easy. Air into two mutually perpendicular intake of an entry. The two air intakes for the standard pipe thread. Is not a block intake, supplied with a pipe plug.
R series pneumatic roller of high frequency vibrator is suitable for the vibration of liquid powder, filling and handling purposes. Because it is a gas transmission, so the vibration frequency to adjust the pressure to achieve control. Mainly used for: Hopper discharge is phlogistic, stir - powder material conveying powder, the mold plastic and compaction of concrete.
Technical parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
R-50
25.150
35.150
36.150
1.175
2.955
4.255
1.550
1.450
1.950
R-65
19.150
21.150
26.150
2.755
4.855
6.1550
2.150
3.100
4.150
R-80
15.650
18.650
19.150
3.150
6.125
7.450
4.500
4.350
5.750
R-100
11.050
14.150
15.150
3.765
6.750
8.955
5.600
5.550
7.350