Reasons for partial liquid surface tumbling of flotation machine
Causes and treatment methods of partial liquid surface tumbling in flotation machine 1) Flotation machine impeller and cover plate are not installed correctly, causing the axial clearance to be large and small on one side. The side with a large gap turns over. Treatment method; adjust the gap between the impeller and the cover plate. 2) The cover of the flotation machine is partially impacted by the impeller. Treatment method; replace the cover. 3) The flotation machine has a steady flow plate. Treatment method; fill the steady flow plate. 4) The flotation machine pipe joint is loose. Treatment method; fastening. 5) When the flotation machine has a steady flow grid plate, some of the grid plates are broken or blocked, and the treatment method; removing the blockage or repairing the grid plate We offer fiber laser cutting machines with power range from 1000-12000W, capable of cutting carbon steel up to 30mm and stainless steel up to 45mm. Laser Cutting Machine,Laser Cutting Machine For Sale,Laser Cutting Machine For Metal,Laser Cutting Machine Price,CNC laser cutting machine Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com
It is important to know that laser cutting machines tend to run at a higher cost than an engraving machine, and this is due to power consumption and consumables. ... It is estimated that the CO2 laser cutting machine uses 51 pence per hour compared to the CO2 laser engraving machine which uses 25 pence per hour