Site sprinkler buying tips

In today's society, with the continuous improvement of the economic level, people's lives have undergone tremendous changes. At the same time, people's thoughts have also changed. No matter whether it is the state or the enterprise, it has made many demands on the workers' working environment. When many people work on the construction site, companies not only take many measures in terms of safety, but also make a lot of efforts in the prevention and treatment of occupational diseases. Many companies take dust reduction measures for the construction site. It is not difficult to find that many sites now have sprinklers, but many sprinklers have been damaged for some time after they are bought. Why? In fact, they did not know the car buying skills when they purchased the site sprinkler , resulting in being deceived by many manufacturers. Now. Today, Xiao Bian talked about the purchase techniques for site sprinklers in detail.

The first is to select the tonnage capacity of the sprinkler according to the environment of the construction site and the width of the road, so as to prevent the phenomenon of being too large or too small after the purchase, thereby causing unnecessary trouble to the construction party.

Secondly, before the purchase, it is necessary to select different types of sprinklers according to the construction conditions of the job site and the conditions of the road surface, and to select differently adapted tire vehicles according to the situation.

Thirdly, due to poor road conditions at the construction site, there may be some minor problems with the vehicles. Therefore, when shopping for sprinklers, we must select vehicles with higher grounds because repair operations can be performed in time when problems occur.

Fourth, regarding the choice of sprinkler pumps, a reasonable choice is made based on the maximum injection engine power required at the site.

Fifth, the selection of tanks, the use of carbon steel on the tank material, as much as possible to prevent the tank body rust.

Sixth, regarding the choice of manufacturers, we must choose the regular old brand manufacturers, because their various facilities and accessories in the vehicle are very reliable, and the quality is also worthy of guarantee. In this way, the number of repairs can be reduced.

The above is an introduction to the purchase of sprinkler trucks on site . I hope to help everyone. Therefore, before buying, we must consider the above purchase of sprinkler trucks to buy the skills and in-depth understanding, so as to be able to buy quality durable and qualified sprinklers.

High Carbon Steel Wire Drawing Annealing Line

High and middle and low carbon wire drawing machine line

(I)Wire surface pretreatment line equipment

1. Equipment comprising and technical requirement

(1) Duck billed pay off stand

(2) Mechanical descaler machine

(3) Steel wire ball strong force cleaning up unit:

(4) Electroanalysis pickling

(5) Heating water channel unit:

(6) Boron coating unit:

(7) Drying unit:

2. Main technical parameter

â‘  Steel wire running speed: not less than 1.5m/s

â‘¡ The washing water pressure which is supplied by user: more than 0.2 Mpa

â‘¢ The uninterrupted compression air which is supplied by user: more than 0.6 Mpa.

(II) LZ Straight Line Drawer Set (Group)

1. Equipment comprising

(1) LZ600 straight feeding drawing set (group)

(2) 800 I spool taking-in set

(3) Man-machine interface control contact screen

(4) Whole set of electric console

High Carbon Steel Wire Drawing Annealing Line,Low Carbon Wire Drawing Machine,Wire Drawing Machine,High-Carbon Wire Drawing Machinery

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com