Sprinkler use and precautions
Sprinkler use and precautions As one of the urban clean vehicles, sprinklers need to pay attention to some matters during use.
In plastic products factory, people are accustomed to call Open Mixer Mill a two-roll machine.The mixer is a kind of mixing plastic equipment which is used in the production plant of plastic products earlier.
1. Drum - Made of chilled cast iron.The inner water can be cooled or heated by steam, and electrically heated. Open Mixer Mill Open Mixer Mill,Rubber Mixer Mixer,Open Type Mixing Mill,Rubber Open Mixing Mill Jinan Power Rubber Roller Equipment Co., Ltd. , http://www.powerrubberroller.com
1. For the use of water, the sprinkler is working in the city, so there is a certain requirement for water, the water source can not be dirty, there can be no stone, wood chips and other garbage floating, to avoid the clogging of the sprinkler nozzle .
2. When sprinkling water, the sprinkler head of the sprinkler should be closer to the ground, so that the impact on the ground will increase, and it is easy to wash away the garbage on the ground. If the sprinkler is too far away from the ground, not only can it not wash away rubbish, it will sometimes affect passers-by.
3, to ensure the integrity of the inlet pipe, to avoid damage, otherwise there will be leakage when watering. Leaking not only wastes water, but also causes unnecessary troubles, such as spilling onto passers-by or building that is prohibited from contact with water.
4. Clean the sprinkler on a regular basis and clean up any deposits, garbage, etc. inside, so as to avoid clogging of the sprinkler or other places.
2. Rack - The steel plate is made of welding or casting, and the structure is rigid.
3. Base - For one-type structure,mining steel plate welding, high operaing stability."
4. Bushing - Bearing-type bushing, shell mining cast iron material, lined with high intensity bearings.
5. Bushing lubrication - Adopt the forced circulation lubrication system.
6. Braking system - Machinery with emergency stop equipemnt,when emergency, press the stop switch, machinery immediately stop.
7. Drum Clearance Adjustment - Electric adjustment.
8. Gearbox - Gear with cylindrical, hard tooth surface 20CrMnTi, quenching treatment, carburizing treatment, hardness HRC 57-62 degrees
9. Installation Cold - Circulatory system, low noise,high transmission power, can withstand higher load.