Tse-65 Twin Screw Extruders for Masterbatch for Making Granules
Sedimentation Tank
Inclined plate sediment tank is kind of high efficient combined type settling tank; set many dense inclined tube packing in sediment area, to make the suspended impurity in water sediment, water rise flow along inclined tube, the separated sludge down to the tank bottom along the inclined tube by gravity, then discharge it in concentration. Such tank can improve sediment efficiency 50~60%, it can improve treatment capacity 3~5 times in the same area. It can design different flow rate inclined plate sediment device according to raw waste water test report, it need dose flocculant usually.
Inclined plate sediment water purifier is format by install 60° dip angle inclined tube above the sludge suspended layer, to make the suspended solids or floc alum flower by dosing flocculant accumulate into thin sludge later in inclined tube downside superficial area, slide back to sludge suspended layer rely on gravity, then settling in sludge collecting hopper, discharge into sludge tank by sludge pipe for separate treatment or comprehensive utilization. The supernatant fluid gradually rise to water collecting pipe discharge or reuse.
Sedimentation Tank,Tube Settler Sedimentation Tank,Lamella Clarifier, Lamella Clarifier Sedimentation Tank YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatment-machine.com
Representive Material:
1, Fibre reiforcement : glass fibre, carbon fibre reinforced PP, PA, PBT, ABS, PC, POM, PPS, PET, etc.
2, Polymer blending:blending of PC/ABS, PA/ABS, CPE/ABS, PP/EPDM, PA/EPDM, PP/SBS,etc.
3, Incorporation of Fillers: Caco3, Talc, TiO2, carbon black,filled PE, PP, or EVA, etc.
4, Cable Compounds: cable sheath, cable insulation compounds of LDPE, HDPE, LLDPE, MDPE; radiation-crosslinkable compounds, optical fibre protection compounds, heat-shrinkable polymer compounds.
5, Special Compounds: PPR pipe compounds, PE compounds for crosslinked pipes, tobacco filter compounds, etc.
6, High Concentration Color Masterbatches: PE, ABS, PS, EVA, PP,etc. with high concentration of pigments and other processing aids.
7, Masterbatches with Flame-retardants: PE, ABS, PS, EVA, PET, PP, etc. with flame retardants and other additives.
Details:
1) Screw diameter : 71mm. L/D= 36:1/40:1/44:1/48:1
2)Main drive motor :AC 132kw,speed regulated by ABB transducer inported from switzerlad
3)Screw rotary speed:50~600rpm
4)Screw shaft is made of high-strength alloy 40CrNiMoA.
5)Lenght of each barrel is 290mm,totally 9 pieces of barrels
6)The 1st barrel is the main feeding vent,the 5th is for degassing,8th is vacuum section,and the others are closed barrels.
7)Casting copper heaters for 2.3th barrels.The others are equipped with casting aluminum heaters,All heating power:~50 kw
8)Reducing and distributing gearbox:
The gearbox reduces the motor speed to the speed of the screw shafts and distributes it to the 2 output shafts,
this gearbox output torque can reach 4.8T/A3
The gearbox consists of:
l Involute gear teeth couplings between the output shaft and screw shafts
l Integrated thrust bearing assembly,radial bearings of the output axis are NSK products
l Bottom part of casing designed as oil sump
Certificate
CE/ISO9001
Haisi Shippment
All our products are packed witjh wooded cases or as customers required
Haisi Service Stystem
Before-sale:
*Introduce products in detail
*Recommend suitable solution
*Offer test
During Manufacturing:
*Provide layout and engineering conditions
*Offer screw plan and related documents
*Inform the project processing status
*Insure the product designed in accordance with technical document
After-sale:
*Provide installation, commissioning and training
*Offer spare parts
*Provide necessary techinical support and update infoamation
If you have any questions, pleasedon't hesitate to contact me or send an inquiry to me!
2. Loader 3. Main feeder 4. Side feeder( for short fiber) 5. Long glass fiber 6. Twin screw extruder 7. Water trough 8. Air knife 9. Pelletizer 10. Product hopper
Besides the twin screw extruder, Haisi supplies all the auxiliary machines and spare parts.
ModelDiameter
L/D
Screw rotary
Motor Power
Torque
Capacity
TSE-20B
22mm
32-44
600r/min
5.5kw
43
0.5-10 kg/h
TSE-30B
31mm
32-48
600r/min
15kw
119
5-30kg/h
TSE-40B
41mm
32-52
600r/min
30kw
239
90-150kg/h
TSE-52B
51.5mm
32-56
600r/min
55kw
438
225-300kg/
TSE-65B
62.4mm
32-60
600r/min
90kw
716
200-300kg/h
TSE-75A
71mm
32-64
600r/min
110kw
1050
250-350kg/h
TSE-75B
71mm
32-64
600r/min
132kw
1050
300-600kg/h
TSE-75C
71mm
32-64
600r/min
160kw
1990
500-1000kg/h
TSE-95B
93mm
32-64
600r/min
250kw
2387
800-1200kg/h
TSE-95C
93mm
32-64
600r/min
315kw
2506
900-1300kg/h
TSE-120B
133mm
32-64
600r/min
550kw
7162
1500-2250kg/h
Representive Material:
1, Fibre reiforcement : glass fibre, carbon fibre reinforced PP, PA, PBT, ABS, PC, POM, PPS, PET, etc.
2, Polymer blending:blending of PC/ABS, PA/ABS, CPE/ABS, PP/EPDM, PA/EPDM, PP/SBS,etc.
3, Incorporation of Fillers: Caco3, Talc, TiO2, carbon black,filled PE, PP, or EVA, etc.
4, Cable Compounds: cable sheath, cable insulation compounds of LDPE, HDPE, LLDPE, MDPE; radiation-crosslinkable compounds, optical fibre protection compounds, heat-shrinkable polymer compounds.
5, Special Compounds: PPR pipe compounds, PE compounds for crosslinked pipes, tobacco filter compounds, etc.
6, High Concentration Color Masterbatches: PE, ABS, PS, EVA, PP,etc. with high concentration of pigments and other processing aids.
7, Masterbatches with Flame-retardants: PE, ABS, PS, EVA, PET, PP, etc. with flame retardants and other additives.
Details:
1) Screw diameter : 71mm. L/D= 36:1/40:1/44:1/48:1
2)Main drive motor :AC 132kw,speed regulated by ABB transducer inported from switzerlad
3)Screw rotary speed:50~600rpm
4)Screw shaft is made of high-strength alloy 40CrNiMoA.
5)Lenght of each barrel is 290mm,totally 9 pieces of barrels
6)The 1st barrel is the main feeding vent,the 5th is for degassing,8th is vacuum section,and the others are closed barrels.
7)Casting copper heaters for 2.3th barrels.The others are equipped with casting aluminum heaters,All heating power:~50 kw
8)Reducing and distributing gearbox:
The gearbox reduces the motor speed to the speed of the screw shafts and distributes it to the 2 output shafts,
this gearbox output torque can reach 4.8T/A3
The gearbox consists of:
l Involute gear teeth couplings between the output shaft and screw shafts
l Integrated thrust bearing assembly,radial bearings of the output axis are NSK products
l Bottom part of casing designed as oil sump
Certificate
CE/ISO9001
Haisi Shippment
All our products are packed witjh wooded cases or as customers required
Haisi Service Stystem
Before-sale:
*Introduce products in detail
*Recommend suitable solution
*Offer test
During Manufacturing:
*Provide layout and engineering conditions
*Offer screw plan and related documents
*Inform the project processing status
*Insure the product designed in accordance with technical document
After-sale:
*Provide installation, commissioning and training
*Offer spare parts
*Provide necessary techinical support and update infoamation
If you have any questions, pleasedon't hesitate to contact me or send an inquiry to me!
2. Loader 3. Main feeder 4. Side feeder( for short fiber) 5. Long glass fiber 6. Twin screw extruder 7. Water trough 8. Air knife 9. Pelletizer 10. Product hopper
Besides the twin screw extruder, Haisi supplies all the auxiliary machines and spare parts.
ModelDiameter
L/D
Screw rotary
Motor Power
Torque
Capacity
TSE-20B
22mm
32-44
600r/min
5.5kw
43
0.5-10 kg/h
TSE-30B
31mm
32-48
600r/min
15kw
119
5-30kg/h
TSE-40B
41mm
32-52
600r/min
30kw
239
90-150kg/h
TSE-52B
51.5mm
32-56
600r/min
55kw
438
225-300kg/
TSE-65B
62.4mm
32-60
600r/min
90kw
716
200-300kg/h
TSE-75A
71mm
32-64
600r/min
110kw
1050
250-350kg/h
TSE-75B
71mm
32-64
600r/min
132kw
1050
300-600kg/h
TSE-75C
71mm
32-64
600r/min
160kw
1990
500-1000kg/h
TSE-95B
93mm
32-64
600r/min
250kw
2387
800-1200kg/h
TSE-95C
93mm
32-64
600r/min
315kw
2506
900-1300kg/h
TSE-120B
133mm
32-64
600r/min
550kw
7162
1500-2250kg/h
