Tumble Belt Shot Blasting Machine with Loading Device
Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive. Small Engine Iridium/Platinum Spark Plug Small Normal Spark Plug,350 Small Block Spark Plugs,Ngk Small Engine Spark Plugs,Small Engine Normal Spark Plug LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.kgvsparkplug.com
This machine uses high-speed revolving impeller to throw abrasive onto the continuously tumbling work pieces in barrel, to attain the cleaning purpose. It is suitable for de-sanding, de-rusting, de-scaling and surface hardening of the small work pieces, such as castings, forgings, impact extruded-parts, gears, springs, etc.This machine cannot clean the work pieces with high temperature or burrs; otherwise, the apron belt will be damaged.Â
Advantages;
1.The machine adopts cantilever-centrifugal blast wheel with long using-life long and simple structure.
2.The machine adopt air separator with good separating effect and high productivity, and it plays positive role in lengthening the lives of blades.
3.The machine adopts bag type dust collector to make the dust density in the exhausted air lower than that stipulated in national standard, to improve working environment.
4.The machine adopts wear-resistant rubber apron belt, to decrease collision and damage to work pieces and reduce noise.
Parameters;
our machines are customized, following datas are just for example.
item\type
Q326EA
Q3210C
QR3210
Q3220
Q15GL
Q18GL
feeding amount
200
800
600
1200
1350
3500
diameter of end disk
Φ650
Φ1000
Φ1000
Φ1092
Φ1092
Φ1245
track type
rubber
metal
rubber
metal
metal
metal
Packing;
plywood box or nude packing
Aftersale service;
1.Our quality guarantee time is one year
2.The exwork product is good quality and has stable performance.
3.Sand mixer in the process of using, appear quality problem, after the user notice, give a written reply within 24 hours or send service personnel leaving the factory, and the fault does not exclude the service personnel do not leave the scene.
4.In guarantee time, if there is any problem happens to the machine by normal operation, not because of artificial damage, supplier is responsible to change the broken parts without any charge, but the easily wear spare parts are not included.
5.The seller supplies spare parts for the machine they sold. The seller has a sufficient inventory warehouse.
Â
Â
Application;
This machine uses high-speed revolving impeller to throw abrasive onto the continuously tumbling work pieces in barrel, to attain the cleaning purpose. It is suitable for de-sanding, de-rusting, de-scaling and surface hardening of the small work pieces, such as castings, forgings, impact extruded-parts, gears, springs, etc.This machine cannot clean the work pieces with high temperature or burrs; otherwise, the apron belt will be damaged.Â
Advantages;
1.The machine adopts cantilever-centrifugal blast wheel with long using-life long and simple structure.
2.The machine adopt air separator with good separating effect and high productivity, and it plays positive role in lengthening the lives of blades.
3.The machine adopts bag type dust collector to make the dust density in the exhausted air lower than that stipulated in national standard, to improve working environment.
4.The machine adopts wear-resistant rubber apron belt, to decrease collision and damage to work pieces and reduce noise.
Parameters;
our machines are customized, following datas are just for example.
item\type
Q326EA
Q3210C
QR3210
Q3220
Q15GL
Q18GL
feeding amount
200
800
600
1200
1350
3500
diameter of end disk
Φ650
Φ1000
Φ1000
Φ1092
Φ1092
Φ1245
track type
rubber
metal
rubber
metal
metal
metal
Packing;
plywood box or nude packing
Aftersale service;
1.Our quality guarantee time is one year
2.The exwork product is good quality and has stable performance.
3.Sand mixer in the process of using, appear quality problem, after the user notice, give a written reply within 24 hours or send service personnel leaving the factory, and the fault does not exclude the service personnel do not leave the scene.
4.In guarantee time, if there is any problem happens to the machine by normal operation, not because of artificial damage, supplier is responsible to change the broken parts without any charge, but the easily wear spare parts are not included.
5.The seller supplies spare parts for the machine they sold. The seller has a sufficient inventory warehouse.
Â
Â