· "Xiaogan City Motor Vehicle Environmental Protection Inspection Agency Development Plan" was approved for implementation
With the acceleration of urbanization and automobile growth, automobile exhaust has become one of the main sources of air pollution. Recently, the Municipal Environmental Protection Bureau revealed that the “Xiaogan City Motor Vehicle Environmental Protection Inspection Agency Development Plan (2014-2019)†(hereinafter referred to as “Planningâ€) prepared by the relevant technical personnel of the Bureau has been officially approved. Wood Glue,White Glue,Outdoor Wood Glue,Pva Wood Glue Hunan Magpow Adhesive Group co.,ltd , https://www.magicglue.net
The vehicle sticker environmental protection reporter learned from the Municipal Environmental Protection Bureau that in May 2014, the municipal government issued the “Management Measures for the Prevention and Control of Motor Vehicle Exhaust Pollution in Xiaogan Cityâ€, which laid the foundation for the supervision of motor vehicle exhaust pollution in Xiaogan City.
“The phase-by-step implementation steps for motor vehicle pollutant emission standards.†Environmental experts said. In the future, vehicles in Xiaogan City will be tested for exhaust gas. Vehicles that pass the ring inspection are classified into green and yellow, and the window is labeled “Environmental Inspection Qualified Markâ€.
“The yellow-label vehicles emit large pollutants and pollute the air. This will help speed up the elimination of yellow-label vehicles and other non-standard discharge vehicles registered before 2005, and accelerate the improvement of vehicle fuel quality.†A staff member of the Municipal Environmental Protection Bureau introduced.
According to the "Planning", Xiaogan City has started the verification of the environmental protection inspection mark for motor vehicles. The reporter learned from the Municipal Environmental Protection Bureau that the newly purchased vehicles will apply for the issuance of the environmental protection inspection mark by means of the purchase invoice and the vehicle passing certificate of the vehicle, or the import vehicle import certificate.
Where are the inspections of motor vehicle exhausts in seven inspection agencies in the city? The reporter learned that the implementation scope of the "Plan" is the administrative area under the jurisdiction of Xiaogan City, including 7 counties and districts and Xiaogan High-tech Development Zone. The planning time limit is 2014-2019.
“In 2015, seven counties, urban areas and development zones under the jurisdiction of the city shall establish and improve motor vehicle environmental protection inspection agencies to implement regular inspections of vehicle pollutant emissions. Xiaogan City has set up seven motor vehicle environmental protection inspection agencies.†Bureau staff told reporters that Xiaonan District and Development Zone should build one, covering Xiaonan District and Development Zone; Hanchuan, Yingcheng, Yunmeng County, Anlu City, Dawu County and Xiaochang County each set up one.
According to the "Planning", Xiaogan City plans to establish a unified environmental inspection and supervision information platform in the city in 2014, equipped with corresponding road (pumping) inspection equipment, and networked with the city's environmental inspection agencies to conduct real-time monitoring of each environmental inspection line. Investigate and deal with excessive emission vehicles on the road to ensure the effectiveness of environmental protection signs.
Dynamic detection of exhaust gas is more comprehensive "Motorcycle exhaust gas detection is a gradual development process." Chen Jintang, an expert who has participated in the development of motor vehicle exhaust gas standards in Hunan, said that in the past, the detection of motor vehicle exhaust pollutants was used in security inspection. The idle method is used for inspection. "The idling method is to let the car stop in place. When the vehicle is inspected without load, it is inevitable that there are fewer detection factors, the test compliance standard is relatively wide, the detection data accuracy is low, and the test data is It is easy to fake and other four major drawbacks."
Chen Jintang said that the city's detection of motor vehicle exhaust is a simple working condition method. This method can simulate the load running state of acceleration, deceleration, constant speed and idle speed when the actual road of the motor vehicle is running, and realizes the dynamic detection of vehicle exhaust. The detection factor is more comprehensive, and the test data can more accurately reflect the exhaust emission characteristics of the vehicle under test, so that the qualified motor vehicles can be inspected regularly, and the exhaust emissions are always at a reasonable level during daily use.
It is understood from me that since the "Twelfth Five-Year Plan", the motor vehicles in Xiaogan City have increased by 15%-20%. In 2013, the number of motor vehicles in the city has reached 565,000, of which about 130,000 vehicles. .
Chen Jintang has many years of experience in the industry. In his view, motor vehicle exhaust has become one of the causes of air pollution. "In daily life, as long as we change our living habits a little, such as driving a vehicle, when we encounter a traffic light that has been in a long time, we can consider extinguishing the engine and reducing the pollution of the exhaust gas to the atmosphere. We will do our best to protect the environment we live together. Chen Jintang said with a heavy heart.
Feature:
Wood glue is also called white glue, this product is water polymer emulsion, has the characteristics of high viscosity, non-toxic, not smelly, dry quick and so on
Main Component:
Polyvinyl acetate emulsion unit, water, filler.
Scope of application:
50% solid content mainly for water-solubility construction coating raw material, to the lumber, the paper, the leather, the linter fabric, the cement and the foam plastics and so on has the good binding property, may serve as the books wireless to bind, cigarette, boding and sizing of fabrics.
40% solid content is mainly for wood processing, cigarette and bonding and sizing of fabric. 30% solid content mainly use as sticks for paper, small lumber, available in paper processing (paper pulp chemical additive, paper soaking, spreads cloth to help medicinal preparation), fabric processing, cement intensifier, handicraft production and culture and education office supplies bond.
25% solid content mainly uses in the officing, printing, the paper box processing, the low-grade paper tube processing, the handicraft and the paper caking and so on.
Using Method:
1, The joint surface must be clean, dry.
2, Spreads the glue on the joint surface, presses till solidification, maintains for 24 hours under the room temperature to achieve the use intensity.
Warning:
1, The iron barrel packing is strictly prohibited
2, The using temperature should be 10 ℃ or above; After agglutination product before solidification, also should maintain in 10 ℃ above. Otherwise will cause viscosity drop if the emulsion not form good cover.
3, Wipe the bottle mouth clean after use, cover rapidly for usage next time.
4, IF the glue with half coagulation condition please mix evenly, does not affect the viscosity.
5, The water content of wood should be controlled between 8~15%,more or less content will affect the viscosity quality.
6, Do not get into mouth, keep our reach of kids.
Storage and packing:
1, The product should be stored at temperature 5~37℃ in sealed non-metal container, prevent from freeze and high temperature. The shelf life is one year from date of production. It is available to use based on passing of the test if being beyond the shelf life.
2, If the glue slightly freezes, should place in 30~40 ℃ greenhouses the full alleviation, and stirs evenly, does not affect the use. If the glue long time receives seriously freezes, cannot alleviate, appears agglomerates, the lamination even emulsion breaking, then cannot continue to use.
3, Preserve and transport as flammable products.
4, 500g/bottle, 1000g/bottle, 5kg/barrel, 15kg/barrel,in plastic bottle(barrel)