·Car three-point repair seven points to raise cold days at night

In winter, vehicle maintenance is undoubtedly the most concerned topic for car owners. In this issue of the safety warning column, the Provincial Safety Supervision Bureau (Sichuan Coal Supervision Bureau) reminds you that the car needs “three-point repair, seven-point maintenance”, and through active inspection and maintenance, to discover and eliminate some initial and potential Implicit failure.
Try to avoid parking the vehicle at the tuyere when parking at night, because the vehicles are made of metal, especially inside the engine cylinder. After a night of blowing and low temperature, the heat absorption and conductivity of the metal will cause frost inside the engine. The internal temperature will drop very low, which will not only bring great difficulty to the start of the engine, but also damage the engine itself. Therefore, after starting the vehicle in winter, try not to drive or hit the throttle immediately, otherwise it will cause serious damage to the various parts of the vehicle. The most common problem with driving in winter is the fog in the glass inside the car. At this time, the temperature knob can be placed in the warm air position to achieve the purpose of both defogging and heating. The lighting inspection mainly includes fog lights, headlights, high-position brake lights, etc. Once the blackened light bulb is found, it should be replaced as soon as possible. Ordinary halogen headlights generally reduce light after two years, and if you want to modify xenon headlights, the color temperature should be between 5000 and 6000K. Because, the higher the color temperature, the lower the penetration of light in dense fog, and the greater the safety hazard.
Tire rubber will harden and be relatively brittle in winter, and the friction coefficient will decrease, so the tire pressure should not be too high, but it should not be too low. Low outside temperatures and low tire pressure will accelerate tire aging. In winter, the inclusions in the tread should be cleaned frequently. Try to avoid using tires that have been replenished more than once, and replace tires with large wear and different brands. The internal and external wear of the tire is very different. To ensure safety and reduce wear, the tire should be replaced regularly.

Manipulator

Manipulator,Manipulators,Robotic Manipulator,Welding Manipulator

Jiangyin Tongli Industrial Co.,Ltd , https://www.manipulator17.com