Chen Bingyan: China's auto parts industry analysis and future development trend
Chen Bingyan, deputy director of the Policy Research Association of the China Association of Automobile Manufacturers, gave an analysis report on “Analysis of China’s Auto Parts Industry and Future Development Trends†at the “7th China Automotive Industry Development Summitâ€. Director Chen specifically analyzed the current status of auto parts enterprises. He pointed out that before the reform and opening up, most of the enterprises under the planned economic system were state-owned enterprises. Through reform and opening up, the current enterprises basically formed a diversified structure of capital. The parts industry is even more so. First of all, the layout is more reasonable. The domestic parts and components companies are mainly located in the Pearl River Delta, the Yangtze River Delta, the Bohai Rim, Tianjin, and the northeastern regions. All of them are clusters of parts and components that surround the entire vehicle industry. Parts companies must adapt to the requirements of the vehicle manufacturers. The overall description of China's auto parts industry has basically got rid of the pattern of large numbers, small scales, and poor quality in the past. The level of manufacturing has increased significantly, and a complete system for the supply of domestic auto manufacturers has been formed. Secondly, some companies already have the ability to independently develop and supply systems, open up overseas markets to enter the international procurement system, and export volume has increased year by year. Thirdly, foreign investment in China’s auto parts and components continues to increase. They have mastered the core technologies of some of the key components and products and have basically monopolized the market for OEMs. After China's accession to the WTO, the assets of the auto parts industry have increased year by year. From the perspective of industry development trends, the auto parts industry has shifted to specialization. This is a case of multinational companies attracting capital. China's huge market potential and low labor force are attracting more and more multinational auto parts and components groups. In terms of industrial layout, China's parts and components industry has formed five major sections in the Bohai Rim region, the Yangtze River Delta region, the Pearl River Delta region, the Hubei region, and the central and western regions. As of the end of 2007, there are more than 8,000 vehicles in China. Component companies are also concentrated in these regions, among which Zhejiang Province has the largest number of companies with more than 1600 parts and components companies, accounting for about 20% of the total number of companies in the country. The top six companies in the number of enterprises are Zhejiang and Jiangsu, respectively. Shandong, Hubei, Shanghai and Guangdong accounted for 57.96% of the total number of enterprises in these six regions. Component industrial structure development stage The first is the starting stage, 53 years -78 years, and the growth period is 78 years - 92 years, because at the time we began to engage in spare parts and engaged in sedan, and then from 1992 to 2000, we should say that the state introduced the industrial policy, and at the time we engaged in The localization policy has played a very big role, especially with SAIC's Santana, and it has basically started with the parts of the whole car. Therefore, the quantity and quality of Shanghai's current parts and components are now able to be our own brand cars. Providing parts and components can also provide parts and components for joint venture brands. Of course, how to develop them afterwards has to do with our efforts. The next stage is the dividing line of the year 2000. When we joined the WTO, we paid a price for the auto industry. All the access thresholds for our parts and components were open. During the negotiation process, we promised that the localization will not be mentioned. After we entered, after entering the WTO, our overall vehicle manufacturing level was improved. Later, we generally maintained good control. In the course of increasing competition, we are actually the past few years. In the middle of these eight years, All the advanced technology of spare parts is also good for us. We can at least see and learn, so it is helpful to promote our parts and components industry. Then after 2000, I think we are now A merged development stage, of course, also includes innovation and development, we do not care, we ourselves in addition to buy IBS, EBS also, including the engine management system, common rail system we have mastered, the key is the market problem, how to use the problem, so I think that the year 2000 should be a stage of integration and development. This performance is our country’s current spare parts industry and international zero. The parts industry is too tiny. There are several major problems that exist. The core technologies of key components do not exist. The trend of OEM high-end market marginalization is serious. The strategic intentions of foreign acquisitions, mergers and acquisitions of sub-enterprises, especially auto parts leading companies are highlighted, and vehicle auto companies control the key zero. Parts have weak capabilities. Finding solutions to these problems is our future direction. The development trend is the scale of production, internationalization of operations, advance development and simultaneous development. This is very important. In terms of our parts and components, it should be ahead of the development of the whole vehicle. After the advance development, your vehicle can be competitive. Our previous The parts actually have the follow-up of the vehicle. There is no way out for follow-up development. You only have to participate in the synchronous design of the entire vehicle. Then you come back to provide the parts that meet the performance requirements of the entire vehicle. Now we have zero for the whole vehicle. Parts should be neutral and one should be clustered. A topless Tower Crane, also known as a flat top tower crane, is a type of construction crane that does not have a traditional horizontal jib or boom. Instead, it features a horizontal machinery arm that is used to lift and move loads. The absence of a jib allows for easier maneuverability and greater flexibility in confined spaces. Flat Top Crane,FlatTop Tower Crane,Flat Top Type Tower Crane,10T Flat Top Tower Crane,Flat Top Tower Crane Advantages SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com
Topless tower cranes are commonly used in urban construction projects where space is limited. They can be easily erected and dismantled, making them ideal for projects with tight timelines. The lack of a jib also allows for better visibility for the crane operator, enhancing safety on the construction site.
These cranes are typically mounted on a concrete pad or a tower section, and their lifting capacity can range from a few tons to several hundred tons. They are often used for tasks such as lifting and placing heavy materials, equipment, and prefabricated components during the construction process.
Overall, topless tower cranes offer numerous advantages in terms of efficiency, versatility, and safety, making them a popular choice in the construction industry.