Clamp-type grounding pincers characteristics and parameters
Ethylene Bis Oleamide,Ethylene Bis Oleamide Cas 110-31-6,Cas 110-31-6,Ethylene Bis Oleamide 110-31-6 Jiangxi Zhilian New Materials Co., Ltd , https://www.zhilian163.com
Suitable for any grounding place, multi-point or single-point grounding, can be tested normally.
2. Strong anti-interference ability:
Since high-frequency currents are generated to filter harmonic currents such as 50HZ, 100HZ, etc. in commercial power, accurate measurements can be made even in a 500KV substation environment.
3. Wide measuring range and high resolution:
Range from 0.01Ω ~ 1000Ω, resolution 0.01Ω, ground resistance below 0.7Ω can also be accurately measured.
4. Large jaw design:
The diameter of the jaw is 50mm, which can meet the situation of using flat iron/steel as the ground lead. The special jaw size can be customized according to customer requirements.
5. Large-capacity data storage:
200 sets of measurement data can be stored.
Clamp-type grounding resistance tester double clamp parameter 1. Earth resistance measurement range: double clamp method: 0.01Ω to 1000Ω; ground pile method: 0.01Ω to 1000Ω
2. Error: double clamp method: ± 2% ± 2 words; ground pile method: ± 1.5% ± 2 words 3. Minimum resolution: 0.01Ω
4. Clamp size: Φ50mm
5. Storage capacity: 200 sets of data 6. Working temperature: 0°C~+50°C
7. Power supply: 8 NiMH rechargeable batteries or ordinary AA batteries. Weight: 0.8KG
9. Size: 265mm×130mm×65mm