Liberation of the new Converse four after four tankers

The effective volume of the tank of the new four-wheeled tanker: 21 cubic meters, the tank size: 7800 mm long, 2200 mm long shaft, 1550 mm short shaft. The maximum volume of the tank: 23 cubic meters, chassis type CA1250P1K2L7T3BE4A80, Wheelbase 1900+5150; J5M Xinwei Weiping floor high-top cab, CA6DF4-22E4 engine, Shaanxi gear 7-speed gearbox, 457 welding bridge, 280*90*8 frame, 10.00R20 tire, with GPS driving record Instrument, front and rear drum brakes, with domestic ABS, air conditioning, speed limit 79KM / H.

\

\

【The main technical parameters】

Product trademark Chusheng

Announcement Lot 275

Product Name CSC5250GYYCA Oil Tanker

Product No. ZLGMA4WP02M

Total mass (Kg) 25000

Tank volume (m3) 20.3

Rated load mass (Kg) 13550, 13615

Dimensions (mm) 10950×2490×3290

Curing quality (Kg) 11255

Cargo size (mm) × ×

Rated passenger (person)

Quasi-trailer total mass (Kg)

Number of passengers in the cab (person) 3,2

Load mass utilization factor

Approach angle / departure angle (°) 21/11

Front overhang / rear overhang (mm) 1375/2525

Number of axes 3

Wheelbase (mm) 1900+5650, 1900+5150, 2300+5250, 2300+4750

Axle load (Kg) 6750/6750/11500 Maximum speed (Km/h) 79

Other transport media: gasoline; category number: 3, density: 700 kg / cubic meter; effective volume of the tank: 20.3 cubic meters, tank dimensions (length × width × height) (mm): 8100 × 2360 × 1560. 2, side protection left and right symmetry using cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 100mm, a section width of 50mm, and a lower edge of 540mm from the ground. 3. Optional cab with chassis; only use radial tire, speed limit device, auxiliary brake device and chassis of front disc brake; install tachograph with satellite positioning function; ABS model/manufacturer: VIE ABS-II/ Shanghai Wanjie Automobile Control System Co., Ltd.;

\

\

\

(This article is from Xiagong)

Mold For Water Filter Cartridge Making

It is an extrusion die used in the filter

China Filter Mold,Extruding The Filter Mold supplier & manufacturer, offer low price, high quality Melt Blown Filter Mold,Mold For Extruding The Filter, etc.

The melt blown cloth mold is easy to block holes and crystallize, one point must be used on the machine after polishing
Clean the melt blown cloth mold after polishing
The melt blown cloth mold should be stored in a dust-free environment.

2

Filter Mold,Extruding The Filter Mold,Melt Blown Filter Mold,Mold For Extruding The Filter

Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com