The old driver teaches you to learn the brake skills of refrigerated trucks
Some drivers with short driving experience learn to drive, but they often develop bad habits when driving a refrigerated truck . In the early driving process, they speed up the speed in time, and when there are some more urgent situations, emergency The brakes, although lucky enough to pass through the danger, were regretful when they were not so fortunate to have caused a traffic accident. So what are the skills for braking when driving a refrigerated truck? 1. It is dangerous when there are floating sand on the road surface or on some dirt roads in rural areas. Not only these road conditions, but also some of the road on both sides of the asphalt and asphalt road will have some Accumulation of sand, so be careful when using emergency brakes in such situations. 2. When a refrigerated truck is making a turn, it is necessary to pay attention to the operation of the brake. When the brake is applied, the refrigerated truck will lose its focus easily, so when the vehicle enters the curve, it needs to use the brake. Full and effective reduction of speed. 3. Release the brakes before refrigerating the vehicle completely stopped. If the purpose is to drive the refrigerated vehicle , the brakes will always be depressed and the refrigerated vehicle will stop driving. This will cause a great impact. Forces and skills to use the brakes require that the brakes be released once before the vehicle is completely stopped, and then braked at a light point until the vehicle is completely stopped. 4, when the driver has a relatively high braking skills, the long-distance light braking is not brought to the front passenger seat or people who ride the vehicle feel a strong impact. However, the premise to be able to have this feeling is the need to be able to properly and accurately grasp the traffic conditions of the road ahead and the road surface. The first step is to release the accelerator pedal and then apply the brakes based on the speed and distance. 5. When the refrigerated truck is driving a downhill section and also uses an engine brake together, the braking system of the refrigerated truck will directly affect the performance of the brake due to excessive heat generation when the brake is used for a relatively long time. Therefore, it is possible to select the gear position of the transmission between 1/2/3 gear depending on the installed road surface, and it is possible to control the vehicle speed using the legal brakes of the next vehicle.
The Hydraulic Filter Element is used in the hydraulic system to filter out particulate debris and rubber impurities to ensure the cleanliness of the hydraulic system.
The Filter Element is for high pressure section, medium pressure section, oil return section and oil suction section.
In order to reduce the dimensions of the filter element and increase the filtration area, the filter layer is generally folded into a corrugated shape, and the layer is generally pleated below 20 mm.
Test standard
ISO2942-ISO16889-ISO3968-ISO3724-ISO3723-ISO2943-ISO2941
Filter Element Filter Element,Hydraulic Filter Element,Hydraulic Oil Filter Element,Oil Separator Filter Element Xinxiang Shengda Filtration Technique Co., Ltd. , https://www.filtrations.nl
