What should pay attention to when storing the pressure gauge calibrator

What need to pay attention when using the pressure change calibrator? Xiao Bian to answer for you:

The pressure gauge calibrator should be placed in a dust-free, non-corrosive environment.

When the pressure calibrator is not in use, the power supply should be turned off. If the pressure calibrator is not used for a long period of time, charge it once every three months.

The instrument has sufficient overload capacity, but it must not be heavily overloaded, otherwise it will damage the sensor and cause the instrument to become unusable.

The pressure calibrator sensor is a high-precision product, and the surface of the silicon diaphragm must not collide with solids, otherwise it will damage the sensor.

Without professional testing skills and special testing equipment, do not open the cover for maintenance, and do not allow adjustment of the internal device replacement material. Otherwise, the reliability of the instrument cannot be guaranteed.

Do not allow other heating elements such as electric irons to be close to the display to prevent burnout of the plastic grease material.

Do not scrub the panel with chemical solvents such as gasoline or alcohol.

Although the pressure calibrator has a seismic design, it should still be handled with great care, especially when used in the field, avoid falling, crashing.

At the same time, the pressure gauge calibrator should be stored in the following places:

1. Very high humidity 2. Near high temperature heat source 3. Strong vibration 4. Corrosive gas.