Wreckers Operation Guide
The Cheng Li Special Steam Road Wrecker Operation Guide helps you to operate your vehicle easily and is safe and efficient. This series of permanent-magnet synchronous gearless traction machines is directly driven by a low-speed, high-torque, 3-phase permanent magnet synchronous motor, and has the advantages of low energy consumption, low noises, no pollution, and little maintenance.
These traction machines can be arranged for providing upward traction or downward traction, and have remote manual brake release function. Wrap angle of the traction machines can be only 180°.
Standard Gearless Traction Elevator, Gearless Elevator Traction Machine, Gearless Elevator Machine, Gearless Traction Motor
Gearless Traction Machine,Gearless Traction Elevator, Gearless Elevator Traction Machine, Gearless Elevator Machine, Gearless Traction Motor Ningbo Xinda Elevator Traction Technology Co., Ltd. , http://www.xinda-elevator.com
1. When the wrecker is walking on the road, connect the brake pedal together; correctly adjust the brake system of the wrecker;
2. Before the wrecker is walking, check the condition of the vehicle and tire inflation. Open the wrecker's headlights and flashing lights when driving on the road.
3. Drag the heavy goods uphill and downhill should hang the same gear; if the wrecker load weight is greater than the wrecker, do not drag downhill;
4. When the wrecker is suddenly started, be sure to open the gear and turn the crank in the driver's seat;
5. Keep the wrecker engine, battery, and starter system in good working condition.
By using flat frame structure with three mounting surfaces, this series of traction machines can be installed on bottom floor or any middle positions or on the top of shaft way.
