Aluminum foil sealing machine
Product Name: Portable chain sealing machine Product Model:ZS-100 Product Category: Sealing Machine yhcpr37 Applicable objects: The sealing machine is used for packaging and sealing equipment for plastic bags and composite aluminum foil bags, which are ideal for pharmaceutical, pesticide, food, cosmetics, and lubricant industries. Technical Parameters: Power supply: 220V/50Hz Power: 230W Weight: 4.5kg Temperature: 0-200° Sealing speed: 3.3m/min Dimensions: 290×94×160mm Principles and characteristics: 1. The sealing machine is mainly used to seal the composite film material and plastic bag sealing of the inner layer of sealing polyolefin (such as polyethylene, polypropylene, etc.). 2. The composite film sealing includes cellophane sealing, aluminum foil sealing, aluminum spray coating sealing, polyester sealing, nylon sealing, polyethylene sealing, polypropylene sealing and other material sealing. 3, the thickness of the film, the width of the seal can be applied within a certain range, can achieve a good and uniform linear seal. 4. Regardless of large bags, small bags, long bags, and short bags, continuous linear sealing can be performed to obtain satisfactory results. 5, the machine is compact and easy to operate. Water-assisted injection molding: Water-assisted injection molding technology is an advanced injection molding process in which part of the melt is injected into the mold cavity and high-pressure water is injected into the melt through the equipment to finally shape the workpiece.
Due to the incompressibility of water, the water front creates a solid interface, squeezing the inner wall of the product into a cavity, and the water front also acts as a rapid cooling. Therefore, the water supplement has many advantages over the gas supplement. Research and application show that the water supplement can produce thinner and more uniform cavity wall, and the inner surface of the flow channel is very smooth. Especially for thick wall workpiece, the cooling time can be greatly reduced compared with gas auxiliary.
High gloss injection molding: Highlights the basic process of injection molding is prior to injection molding, through the use of high temperature and high pressure steam will mould surface rapidly warming, the forming die cavity surface temperature of resin plastic glass transition temperature (Tg) above, then the plasticizing good plastic melt into the closed mold cavity, the injection stage, mold temperature by high temperature and high pressure steam remains the same, When the injection is finished, the air supply is stopped, and the water vapor in the pipe is blown clean by air pressure of the air pipe. After that, the cooling water is injected to make the mold temperature drop rapidly until the mold is cooled and the product is removed by opening the mold
Plastic Parts,Electronic Plastic Parts,Circuit Board Plastic Parts,Injection Molded Plastic Parts Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com