Lighting Designer Registration Management Measures

The first chapter of the general rule is to further improve the professional quality of lighting designers, promote the healthy and orderly development of the lighting industry, regulate the practice of lighting designers, and develop these measures. Article 2 The registration, practice, continuing education and supervision and management of registered lighting designers within the territory of the People's Republic of China shall be governed by these Measures. Article 3 The registered lighting designer referred to in these Provisions refers to the professional qualification certificate (hereinafter referred to as the qualification certificate) obtained by passing the examination or passing the examination, and registered in accordance with these regulations, and obtained the registration certificate of the China Lighting Society (hereinafter referred to as registration). Certificate), as the person in charge of the design project and the professional and technical personnel engaged in related activities. Failure to obtain a registration certificate shall not be carried out in the name of a registered lighting designer. Article 4 The China Lighting Society shall implement unified supervision and management of the registration and practice activities of national registered lighting designers. Chapter II Registration Article 5 The registered lighting engineer shall implement the registration practice management system. The registered lighting division shall be divided into a first-level registered lighting designer and a secondary registered lighting designer. Article 6 Persons who have obtained the qualification certificate may, after registration, practise in the name of a registered lighting designer. Article 7 The following conditions shall be met when applying for initial registration: (1) obtaining a qualification certificate after passing the examination or passing the examination; (2) meeting the requirements stipulated in continuing education; (3) not having the situation listed in Article 15 of these Provisions. Article 8 For the initial registration of the application, the China Lighting Society shall, within 30 days from the date of accepting the application, complete the examination and approval and make a written decision. Article 9 For the application for change of registration and renewal of registration, the China Lighting Society shall complete the examination and approval within 20 days and make a written decision. Article 10 The registration certificate is the practice certificate of the registered lighting designer. It is kept and used by the registered lighting designer. The validity of the registration certificate is 3 years. Article 11 The initial registrant may apply within 3 years from the date of issuance of the qualification certificate. Those who fail to apply within the time limit must meet the requirements for continuing education before applying for initial registration. Article 12 The following materials are required for the initial registration: (1) The initial registration application form for registered lighting designers; (2) A copy of the qualification certificate, academic certificate and identity certificate; (3) If the application for initial registration is overdue, it shall be provided. Proof of continuing education requirements. Article 13 If it is necessary to continue practicing in the period of validity of registration, it shall apply for renewal of registration in accordance with the provisions of Article 14 before the expiration of 30 days. For the renewal of registration, the validity period is 3 years. Article 14 Where an application for renewal of registration is filed, the following materials shall be submitted: (1) the registration application form for the registered lighting designer; (2) the original registration certificate; (3) the certification materials for the applicant to meet the requirements for continuing education during the registration period. Article 15 An applicant who fails to register in one of the following circumstances: (1) does not have full capacity for civil conduct; (2) fails to meet the requirements for continuing education of registered lighting designers; (3) is subject to criminal punishment, criminal (4) Criminal punishment for practicing activities, from the date of completion of criminal punishment to the date of application for registration, less than 5 years; (5) Criminal punishment for reasons other than those specified in the preceding paragraph, The date of the penalty decision is less than 3 years from the date of application for registration; (6) The age is over 70 years old. Article 16 If a registered lighting designer has one of the following circumstances, the registration certificate shall be invalid: (1) the registration expires and the registration is not extended; (2) the age is over 70 years old; (3) the death or not complete civil (4) Other circumstances that lead to the invalidation of registration. Article 17 If a registered lighting designer has one of the following circumstances, the China Lighting Association shall go through the formalities for cancellation, recover the registration certificate or announce the registration certificate: (1) There is a situation listed in Article 15 of these Provisions; ) the certificate of registration has been revoked; (3) it is subject to criminal punishment; (4) other circumstances in which laws and regulations stipulate that registration should be cancelled. Article 18 If the registration is cancelled or not registered, the registration may be re-applied in accordance with the provisions of Article 14 after the registration conditions are re-established. Article 19 If a registered lighting designer needs to reissue a lost or defaced registration certificate, he shall apply to the China Lighting Society for a replacement. The China Lighting Society should be completed within 10 days. Article 20 The registered lighting designer shall enjoy the following rights: (1) using the name of the registered lighting designer; (2) signing the documents formed in the practice of the person; (3) keeping and using the registration certificate; (4) I practice and explain my practice activities; (5) accept continuing education; (6) obtain corresponding labor remuneration; and (7) make representations about violations of my rights. Article 21 A registered lighting designer shall perform the following obligations: (1) abide by laws, regulations and relevant management regulations, abide by professional ethics; (2) implement technical standards, norms and procedures; (3) guarantee the quality of the results of the practice, And (4) accepting continuing education and striving to improve the standard of practice; (5) keeping secrets of state secrets and other people's business and technology that are known in practice; (6) voluntarily avoiding the interests of the parties Article 22 A registered lighting designer shall not have the following acts: (1) failing to fulfill the obligations of the registered lighting designer; (2) asking for bribes, accepting bribes or seeking other benefits other than the contractual fees during the practice; (3) Commercial bribery in the course of practicing; (4) signing unqualified documents such as false records; (5) allowing others to engage in practising activities in their own name; (6) altering, reselling, leasing, lending or otherwise illegally transferring qualifications Certificates, registration certificates; (7) Other acts prohibited by laws, regulations and rules. Article 23 If the relevant circumstances or the provision of false materials are applied for registration, the China Lighting Society shall not accept or refuse to register, and shall give a warning that the applicant may not apply for registration again within 1 year.

Anatase Titanium Dioxide

It is a white inorganic pigment with non-toxic, best opacity, best whiteness and brightness, and is considered to be the best white pigment in the world today. Titanium white has strong adhesion, is not easy to change chemically, and is always white. Widely used in coatings, plastics, papermaking, printing inks, chemical fiber, rubber, cosmetics and other industries. It has a high melting point, and is also used to make refractory glass, glaze, enamel, clay, high temperature resistant laboratory utensils, etc.

Anatase titanium dioxide belongs to pigment grade titanium dioxide, which has the characteristics of strong hiding power, high coloring power, and good weather resistance. Mainly used in industrial sectors such as rubber, plastics, papermaking, printing inks, coatings and chemical fibers.

The use of anatase titanium dioxide mainly has the following aspects: Titanium dioxide for papermaking generally uses anatase titanium dioxide without surface treatment, which can play the role of fluorescence and whitening, and increase the whiteness of paper. The titanium dioxide used in the ink industry has rutile type and anatase type. It is an indispensable white pigment in advanced inks. The titanium dioxide used in the textile and chemical fiber industries is mainly used as a matting agent. Since the anatase type is softer than the gold red type, the anatase type is generally used. Titanium dioxide is not only used as a coloring agent in the rubber industry, but also has reinforcing, anti-aging, and filling functions, and is generally based on anatase.

Anatase Titanium Dioxide,Titanium Dioxide Anatase,Anatase Titanium Dioxide For Rubber,Anatase Titanium Dioxide Powder

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com