AQUAMATICK53 plastic body diaphragm valve for water treatment

AQUAMATICK53 plastic body diaphragm valves for water treatment have the following features: 1) The improved Y-channel design provides lower pressure drop than the K52 series. 2) The separation between the fluid chamber and the pressure control chamber provides the perfect closing of the valve without the help of springs. 3) through a special process of forming and stress relief to reduce the diaphragm effect of fatigue, the service life of the diaphragm can be extended, the standard material for the BUNA-N (operating temperature below 65 ℃), the other with VITON material (Operating temperature below 82 ℃) to choose from. 4) The standard body of the valve body is made of FRP-filled NOR-L with the shaft and baffle parts of PVC, which greatly enhance the service life of the valve. The shaft and baffle parts of CPVC are also provided (the operating temperature is lower than 82 ℃ ) To choose from. 5) The shaft has two sets of seals at the shaft, thereby improving the shaft leakage; the other hand, the central part of the valve to add an overflow hole, in order to lead to water droplets, ring standard material EP, the other with VITON material Acidic liquid) and BUTYL material (for alkaline liquids) are available. 6) The new bonnet design, without special tools can be free to pack the valve body internal components. 7) The lower part of the valve body is provided with a bolt fixing seat, which brings more convenient construction methods for the user. 8) The standard valve is normally open type operation. AOUAMATIC offers alternative modes of operation such as normally closed NC, SAC, SAO, LS. Switch display type (PI), etc., to meet the diverse needs of the operation.

Transmission Parts

Transmission Parts is components of transmission system, transmission system is generally made up of the clutch, transmission, universal transmission device, main gearbox, differential and half shaft etc.Its basic function is the power coming from the engine to the car driving wheel, a driving force to produce, make the car can drive in a certain velocity.

For the front-engine car, the torque provided by the engine, in turn, passed to the rear wheeles from the clutch, gearbox, universal joint, drive shaft, the main reducer, differential and half shaft, so the rear wheel is known as driving wheel. When the drive wheels get the torque, it will give a backward forces on the ground, and so a forward to driving wheels of reaction, the reaction is the driving force of the car. The front wheel of the car usually don't have relationship of power with the transmission system, it is why it is called driving wheel.

Transmission Parts,Aluminum Die Casting Transmission Housing,Transmission Gears Spare Parts,Transmission Gearbox Parts

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.diecastingdie.com