Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless

Model NO.: HF3015B
Laser Technology: Laser Control Fault Cutting
Laser Power: 4000W
Stainless Steel: 1.0~12mm
Aluminum(Magnesium): 1.0~12.0mm
Brass: 1.0~8.0mm
Carbon Steel: 1.0~22.0mm
Trademark: Hymson
Transport Package: Standard Plywood Case
Specification: 8300mm*5700mm
Origin: Guangzhou, China

HF3015C-4000W Automatic Fiber Laser Cutting Machines For Metals
Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless
Hymson Laser Cutting Machine are distinct from traditional laser machine. Since the laser never makes physical contact with the metal, there is little to no wear on the equipment, and there is less opportunity for the material to become contaminated. In addition, fiber laser cutting leaves much fewer burrs than traditional laser equipment so your product is virtually flawless.

 
------------------------------------------------------- Equipment Structure -----------------------------------------
 
Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless
Hymson Double-stage Old-style Up and down exchange board Similar Double-stage
 Doual-motor & Double chain configuration
 8 sets of  high strength chains		 Simple high and low lift structure Single-motor & Sigle-chain
 Structural and Exchange performance stabilit
 Avoid deviation or collision		 Slow speed
poor stability		 Easy to deviation
 Zero positioning consistent Zero positioning consistent Zero positioning has deviation 
 Stability exchange speed within 8~15s common exchange speed within 30~60s Common exchange speed within 8~15s
 Flexible setting linkage system or running independently Only linkage system Only linkage system
 Easy to handle freezes and crashes Difficult to handle Difficult to handle
 Easy to clean the waste under the machine tool  / /
 Meet special Plate loading and unloading
 Single-motor & Sigle-chain		 / /


-------------------------------------------------------------------------------------------------------------------------------------

Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless

· The utility of honeycomb welding structure

1. High precision, ensure the stability of the machine for a long time. 
2. The machine tool and bea using honeycomb welded structure to ensure that the tremendous thrust  from motor and reducer distribute evenly to the machine tool for greatly reducing machine vibration.

-------------------------------------------------------------------------------------------------------------------------------------

Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless
· Intelligent servo exhausting system

1. Hymson adopts centralized partition
 air draft intelligent control each subarea cylinder, excellent dust extraction .
2. Provide multiple protection on heat resistant material.

-------------------------------------------------------------------------------------------------------------------------------------

Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless

· RayTools BT240 Series Cutting Head

1.Max. support 4000W fiber laser generator.
2. Optimize optical configuration & smooth and efficient airflow design More economical loss protection lenses.
3. High-precision vertical, optimized cutting section.
4. The rotary focus adjustment and focusing convenient.
5. Using drawer mirror base, easy accessibility.
6. conducive to high anti-material cutting and slab explosion hole sputtering.
7. Collimating lens / focus lens dual water-cooled structure, better cooling effect.

-------------------------------------------------------------------------------------------------------------------------------------

Automatic Cutting Machine 4000W Fiber Laser Cutter Stainless
· Automatic Proportional Valve

1. Pneumatic components equiped AirTac, rexroth, etc
2. Freedom to choose nitrogen, oxygen, air.
3. Low pressure cutting is controlled by proportional valve automatically.
4. To help improving the effect of cutting technology and cutting effect.
5. Special processing capacity for Sharp corners / thick plate holes.
6. Reduce the artificial adjustment work, improve the production efficiency about 30%~50%.
7. Saving gas usage about 20%~40%.

------------------------------------------------------------ Technical Data ----------------------------------------------
 
 Model HF3015C HF4020C HF6020C
 Laser Power 1500W / 2000W / 3000W / 4000W
 Cutting Range 3050mmX1550mm 4050mmX2050mm 6050mmX2050mm
 Z-axis travel 240mm 240mm 240mm
 Positioning Accuracy ±0.03mm/m ±0.03mm/m ±0.03mm/m
 Repeatability ±0.02mm ±0.02mm ±0.02mm
 Max. Moving Speed 120m/min 120m/min 120m/min
 Max. Acceleration 1.2 g 1.0 g 0.8 g
 Equipment Weight 60m/min 60m/min 60m/min
 Max. load of worktable 1.0g 1.0g 1.0g
 Area covered 8.8t 11.6 t 14.8 t
 Power IP level 1.2 t 1.8 t 2.2 t

· Cutting Range
Stainless steel : 1.0~12mm
Aluminum(Magnesium) : 1.0~12.0mm
Brass : 1.0~8.0mm
Carbon steel :  1.0~22.0mm

FAQ:
Question 1: How can I get the best machine for me?
You can tell us your working material, detail work by picture or vedio so that we can judge whether our machine can meet your need or not. Then we can give you the best model depends on our experience.
 
Question 2: This is the first time I use this kind of machine, is it easy to operate?
We will have the free technical training,and send you Software Operating Instructions in English, it can teach you how to operate the machine. If you still can not learn how to use it, we can talk by phone, email or other contact ways.


Question3: If the machine has problem in my place, how could I do?
We could send free parts to you in warranty period if machines have any problem under "normal use".you need to pay the postage.

Question4:What's the guarantee, in case the machine breaks down? 
The machine has one year guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts except for consumable parts will be replaced for free if the problems are caused by quality fault.

Question 5:How long is the delivery time? 
For standard machines, it would be 20-30 days; For non-standard machines and customized machines according to client s specific requirements, it would be 45 to 60 days.

Question 6:How's the payment? 
Telegraphic Transfer(T/T). 

Question 7:Do You Arrange Shipment For The Machines? 
Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.


Question 8:How is the packing? 
Exporting Standard Package

Scale Inhibitor And Reducing Agent

Scale Inhibitor And Reducing Agent,Antiscalant Crystal,Sodium Metasilicate Anhydro,Antiscalant Ball

Tianjin Centerstar Chemical Co., LTD. , https://www.tccadmixture.com