Can a wireless bridge connect a wireless camera?

In wireless monitoring systems, wireless bridges are generally used for transmission, and many customers think of wireless cameras. This question will be asked to Leian personnel, wireless camera and wireless bridge can be connected? In wireless monitoring systems that use wireless bridges, we often do not use wireless cameras. Instead, we use wired cameras. There are more customers who have such ideas, wireless bridges and wireless cameras connected to form a complete wireless monitoring system. Each time, the customer will be explained that the wireless monitoring system only replaces the cable in the transmission part, and other parts still need to be connected to the cable. Let's find out what a wireless camera is.
Wireless cameras generally refer to relatively close-range use, such as home use. Within one or two hundred meters, record and store through WIF network. In other words, the wireless network camera refers to a camera that transmits signals to the network through WIFI instead of the network cable. It is generally suitable for monitoring in stores, rooms, offices, baby rooms, etc. From this introduction, we can see that WIFI cameras are not suitable for outdoor use, and are not suitable for transmitting relatively long-distance monitoring items. And the premise is that there is a range of WIFI.
While our wireless bridges are mainly used outdoors and have 1-100 kilometers, they use ordinary surveillance cameras to connect wireless bridges for transmission purposes. In addition, these outdoor wireless monitoring systems do not need to use the network operators' traffic, networks, and the like. For the entire project, it is quite convenient.

PT100 Temperature Control

SKYELEC Heater Rod Thermostats are suitable for use with Single Phase to control heating in electroplating baths.They are equipped with a 1.6 metre supply cord and standard red cap terminal casing.


The temperature control probe is suitable for automatic control of a pre-set value in the process media and are suitable for heaters up to 2.3 kw single phase. For higher loads, or three phase heaters an additional contactor should be used.

The probes construction makes it ideally suited for etch, pickle and plating solutions. Its robust construction and chemical resistance ensures a long service life. To set the rod thermostat, unscrew the red cover which provides access to the temperature setting control knob. Turn until the desired temperature is opposite the arrow.


Suitable for use with single phase to control heating of electroplating baths and similar solutions.

Comes complete with heavy duty terminal box and adjustable mounting blocks ready for connection.

Available in: Stainless steel, Titanium, Mild Steel or PTFE.

Alternative lengths are available to order.

The units incorporate an integral 25 amp rated thermostat unit housed with a chemically resistant, PVC coated steel terminal box, complete with quick fix brackets.

The thermostat opens on a rising temperature. Range: 25°C to 100°C. They are suitable for up to 6 kw heaters on a single phase supply. For higher loads or a three phase supply an additional contactor should be used.

The control knob is situated outside the PVC coated terminal box.


PT100 Temperature Control, Heater Rod Thermostats, Electroplating Temperature Control

Guangzhou Quanxu Technology Co Ltd , https://www.silicamattingagent.com