Red & Blue Spot Point Warehouse Safety Light for Tow Tractor

Advantages For Led spot point forklift light:

• Wide operating voltage range: It can apply to different types of trucks, cars, and other vehicles
• High intensity CREE LED chips;
• Lamp body is faster radiating than aluminum,high temperature resistance,beautiful exterior;
• Lamp cover adopted imported pmma technology,good vitreousness,anti high/low temperature burs;
• Lamp reflector used optical reflectivity projector lens,long reflect distance;
• Fix device from Japanese airlines tighten technology,stainless steel,shakeproof,rustproof,water proof;
• Energy saving,high brightness,long lifespan,adopted japanese encapsulation technology;
• Universal for 9V-32V power sources;
• Life Span: more than ordinary led bulbs, more than 30000 hours;
• Excellent water-proof and shock-resistant aluminum housing;
• Dazzle soft light;
• Work in rain and difficult operation conditions;
• Easy to wire up, install and adjust.

When the LED Safety Warning Spotlight assembly is mounted to a forklift or other moving vehicle, it projects bright blue spot beam pattern on the floor surface. Since multiple lights can be mounted onto a single fork lift truck, the warning light spots can be seen behind or in front of the forklift. The bright light spot on the floor is clearly visible to pedestrians, machines and vehicles in the area, regardless of the ambient noise, alerting them to the nearby presence of the forklift. Traditional audio back up alarms can blend into ambient noise in the building and pedestrians can become immune to the audio warning.

            

Installation:
• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.     

Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.    

Advantages For Led spot point forklift light:

• Wide operating voltage range: It can apply to different types of trucks, cars, and other vehicles
• High intensity CREE LED chips;
• Lamp body is faster radiating than aluminum,high temperature resistance,beautiful exterior;
• Lamp cover adopted imported pmma technology,good vitreousness,anti high/low temperature burs;
• Lamp reflector used optical reflectivity projector lens,long reflect distance;
• Fix device from Japanese airlines tighten technology,stainless steel,shakeproof,rustproof,water proof;
• Energy saving,high brightness,long lifespan,adopted japanese encapsulation technology;
• Universal for 9V-32V power sources;
• Life Span: more than ordinary led bulbs, more than 30000 hours;
• Excellent water-proof and shock-resistant aluminum housing;
• Dazzle soft light;
• Work in rain and difficult operation conditions;
• Easy to wire up, install and adjust.

When the LED Safety Warning Spotlight assembly is mounted to a forklift or other moving vehicle, it projects bright blue spot beam pattern on the floor surface. Since multiple lights can be mounted onto a single fork lift truck, the warning light spots can be seen behind or in front of the forklift. The bright light spot on the floor is clearly visible to pedestrians, machines and vehicles in the area, regardless of the ambient noise, alerting them to the nearby presence of the forklift. Traditional audio back up alarms can blend into ambient noise in the building and pedestrians can become immune to the audio warning.

            

Installation:
• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.     

Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.    

Calcium Stearate

Calcium Stearate,Calcium Stearate Powder,Zinc Calcium Stearate,Pvc Stabilizer Calcium Stearate

Jiangsu Greya New Material Technology Co., Ltd. , https://www.greyastabilizer.com