Intelligent Fresh Beef Meat Portion Cutter for Irregular Shape
Model CUT3D28-II Belt width 254mm Belt speed 5~20m/min Weight error ≤2% Cutting speed 1000 cuts/min Max.product height 140mm Max.product length 650mm Max.product width 240mm Input/Output height 1050±50mm Power 7.55kw Overall dimension 2512x1340x1680mm
Intermediates are also called organic intermediates. Use coal tar or petroleum products as raw materials to manufacture intermediate products such as dyes, pesticides, medicines, resins, additives, plasticizers, etc. Because it was originally used to make dyes, it is also called dye intermediates.
Pharmaceutical supplies
Concept
The so-called Pharmaceutical Intermediates are actually some chemical raw materials or chemical products used in the pharmaceutical synthesis process. This kind of chemical product does not require a production license for drugs, and can be produced in ordinary chemical plants. As long as it reaches some levels, it can be used for the synthesis of drugs.
Effect
Pharmaceutical production requires a lot of special chemicals. Most of these chemicals were originally produced by the pharmaceutical industry. However, with the deepening of social division of labor and the advancement of production technology, the pharmaceutical industry has transferred some pharmaceutical intermediates to chemical companies for production. Pharmaceutical intermediates are fine chemical products, and the production of pharmaceutical intermediates has become a major industry in the international chemical industry.
In cell biology, the intermediate refers to the middle part of the gradually disintegrating spindle around the equatorial plane in the late stage of cell division, and the surrounding cytoplasm concentration increases, filling the entire equatorial plane.
Other Intermediates series,2-Chloropyridine-5-Carbaldehyde,5-Bromo-2-Hydroxynicotinic Acid,2-Chloro-5-Fluoronicotinic Acid,Methyl 4 6-Dichloronicotinate Fuxin Custchem Fine Chemical Co., Ltd. , https://www.custchemvip.com
Intelligent Fresh Beef Meat Portion Cutter for Irregular Shape CUT3D28-II
The three-dimensional measurement of irregular meat is used,analytical calculation by software, which can get the product cutting ength and do multiple angles cutting. Then it can make sure each piece with same weight after cutting or other required weight.
It can be applied with fresh raw meat (Thaw), meat thickness ≥40mm, mainly apply with fish and poultry meat cutting, such as fish fillet, fish steak, chicken meat, chicken steak etc.
Application:
1.Cutting required equal weight products.
2.Removal of the head and tail which does not meet the requirements,then Cut the equal weight products.
3.Cutting weight is within a certain weight range, cutting the whole meat with equal weight, no waste.
Features:
1.The three-dimensional measurement of irregular meat is used,analytical calculation by software to make sure product cuttingweight.
2.To measure all-dimensional.
3.High precision cutting,Weight error ≤2%.
4.The cutting parameters is easy to be adjusted, operated directly by the touch screen.
5.Can do 90 degree cutting angle.
6.The adoption of the European blade.
7.Adopting Imported modular belt, the long service life.
8.Adopting SIEMENS electrical parts, with safety guards, CE compliant.
9.Adopting stainless steel and engineering plastics, easy to clean, in line with HACCP requirements.
10.Easy operation, low maintenance costs.
Technical Parameters
Â
Breading Machine (Crumbing Machine)SXJ200- II
Breading machine SXJ200-can evenly coat the meat like chicken,beef pork, meat and seafood by outpouring the crumb from the hopper when the products is carried by the belt pass under it. For the bottom coating, there is a layer of crumb on the lower belt. Also there is a roller pressing system to press tightly the crumb onto the surface of the food and the thickness of crumb can be regulated by this unit too.
1.Both fine and coarse crumb suitable
2.Easy operation and cleaning
3.Powerful blower and vibrator can easily remove the excess flour.
Preduster(Flouring Machine)SFJ200- II
The conveyor belt carries the products on to a floor bed, above where a hopper above can offer a layer of flour, this makes the products thinly and evenly coated to make preparation of the next processing step. And it can be joined to the battering machine and breading machine to make different production lines to finish the processing of predusting-battering-predusting,battering-predusting and battering-predusting-breading. etc different procedures. It can predust all around the products, completely even.
Powerful blower and vibrator can easily remove the excess flour.
The pressing roller design can help to coat the products and can regulate the thickness of the coating.
2) Two years warranty.
3) Free technical training.
4) Installation and commission support.
5) 24 hours on-line service.
6) Telephone service.
7) Prompt delivery.
8) English version user manual and operation video.
FAQ:
1.Are you a factory or trading company?
We are the manufacturer and we have morethan10 years factory experience.As only the machine made by ourself,quality can be trusted,and most important thing is we can do better service after sales.we know how to fix the problem in each parts easliy.so welcome to visit to our factory
2. How long is the delivery time?
For standard machines, it would be 7-10 days; For non-standard machines and customized machines according to client s specific requirements, it would be 15 to 30 days.
3. How should I pay for my order? what is the procession of this purchase?
 You can do 30% prepayment at first, then we will start to make production. Â
 when the machine is ready , we will take pictures to you, and then you can do the balance. Â
 after we got your payment. We will send the machine to you.
4. How about your service after sales? Can your engineer speak fluent english?
We offer the service from you got the machine,including how to install the machine,Â
how to use machine. how to let machine work.and so on. usually we will teach you how to do by emailor by skype.our engineer has many years of experience for cnc machine service.he can speak very goodenglish,so he can slove the problem in short time.
5. How about the documents after shipment?
After shipment,well send all original documents to you by DHL, including Packing List,Â
Commercial Invoice, B/L, and other certificates as required by client.
Packing and shipping:
   Every machine is packed with great care and tough material. It is packed with cling films first and then film bags. At last, it is packed with wooden case which is reinforced with the iron bar on the top and bottom With this kind machine, all our laser machine can protect well during long trip by sea or by train.We can transport machine by boat or by training, according to your requirement.