Metal Sheet C Purlin Profile Machine/Purlin Roll Forming Machine
Company Profile Q:What's the delivery time? A:Normaly will take 60days Q:Do you have after-sale support? A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. Q:Is there quality control when manufacturing the lines? A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging. Q:What's your strength comparing to the other supplier? A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements. galvanized round pipe,galvanized square pipe,Galvanized square rectangular pipe,Hot dip galvanized pipe Shandong Fengbao Metal Products CO.,LTD. , https://www.fbsteelpipes.com
Components for the Machine
The roll forming machine includes 4tons manual uncoiler unit, sheet guiding equipment, straightening device, pre-punching device, roll forming system, cutting equipment, hydraulic station, electric controlling system(PLC) and run out supporting table.
Â
Â
Material specification
galvanized steel and carbon steel.
Thickness
2.0mm to 3.0mm.
Main Motor Power
18.5 kw.
Hydraulic Power
5.5 kw.
Web Width
Changeable.
Yield stress
235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll Forming Speed
12 m/minute.
Cutting Tolerance
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler
Max. capacity: 4000kgs.
Coil Inner Diameter
508mm.
Voltage
380V, 3 phase, 50HZ; or as per customer's requirement.
Numbers of Stations
17 stations, with 4+5 straightening rollers.
Type of Cutting
Roll-formed and length-set profiled cut.
Material of Main Equipment
Â
Roller Material
GCr15 bearing steel, with quenching treatment.
Active Shaft Material
High grade S45C carbon wrought steel, diameter 80mm.
Electric Elements
PLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider, Germany.
Cutter Blades
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Punching Die
Cr12 mold steel with quenching treatment.
Working Flow
Uncoiling---Sheet Guiding---Straightening &Â Levelling---Hole Punching---Measuring Length &Shearing---Roll Forming---Sheet to support table
Standard Equipment of Machine
1)
Manual Uncoiler, 4-ton
1 set
2)
Infeed Guide
1set
3)
Straightening DeviceÂ
1set
4)
Hole Punching Device
1set
5)
Pre-cut Device Â
1set
6)
Roll Forming Station
1set
7)
Rectification Device
1set
8)
Hydraulic StationÂ
1set
9)
PLC Control Console
1set
10)
Product Support Table
2 sets
11)
Other Spare Parts
1 box
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;Â
3.Spare parts and some small parts packed in plastic tooling box;Â
4.All Components Fixed by steel wire with Container.
FAQ