The fire was finally extinguished after 80 hours of mud and phosphorus leakage accident in Yunnan.
Size: 1/2''~6''
Class Rating: 3000~6000
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: Push, Press, Forge, Cast, etc.
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
Short section is a kind of fittings commonly used in industrial pipeline connection. There are common thread nipples, which are divided into two heads, outer silk, single head outer silk, flat head and outer silk, and some short joints with flanges.
The short section is divided into tubing short section and casing short section. The flanging short section in the pipe fittings is popular with the flange. The flange is set in the flanges, then the tail and the Steel Pipe are welded. At this time, the flange can be moved. As long as the flange is connected to the flange at any time, the flange can be connected. Pipe Nipple,Steel Pipe Nipple,Forged Nipple,Female Pipe Nipple He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com
At 0:00 on May 12, the leakage of phosphorus in the sedimentation tank of Anning Branch of Yunnan Malong Industry Group Co., Ltd. spontaneously set on fire. Yunnan Provincial Fire Brigade and Kunming Fire Fighting Brigade quickly sent officers and soldiers to participate in the fight. At 4:45 in the morning, the Anning Municipal Government set up an on-site command post under the command of Mayor Li Xi of Anning City. Within 40 hours after the establishment of the headquarters, opinions of relevant experts were adopted, and five methods including sand and stone cofferdam landfill, water injection cooling, tank top pumping and soot removal, liquid nitrogen condensation, and concrete wall filling were adopted. In the treatment, mud phosphorus leakage and fire are effectively controlled, but the fire cannot be completely extinguished. At 9 o'clock on the evening of the 13th, the headquarters decided to use phosphate slag bagging cofferdams, high-lift mine conveyor belts, and concrete as a whole to handle the water. At 7:15 pm on the 14th, the fire was basically extinguished. At 10:30 on the 15th, all fires at the scene were extinguished.
According to the person in charge of the Kunming Environmental Protection Bureau, by 2pm on May 15th, the sulfur dioxide and hydrogen dioxide contents of all monitoring points are within the national standards, which indicates that the environment in the plant area and its surroundings is safe. There was no other casualties in this accident except that one firefighter was burned by mud phosphorus.
The accident caused the Yunnan provincial party committee, the provincial government and the Kunming municipal party committee and government to attach great importance to it. Yunnan Provincial Party Committee Deputy Secretary Wang Xueren, Provincial Party Standing Committee, and Kunming Municipal Party Committee Secretary Yang Chongyong gave instructions. Deputy Secretary of the Kunming Municipal Party Committee and Secretary of the Municipal Committee of Politics and Law Tian Yunxiang Deputy Mayor Li Jiang and Chen Ying were present at the scene.
According to reports, mud phosphorus solidifies when the temperature reaches 41.4°C, but when oxygen is encountered at 35°C, it ignites spontaneously and it is very difficult to extinguish. In this accident, 6,000 personnel participated in the disposal, and the direct rescue cost was 200,000 yuan. The property damage caused by the accident was far from the cost of rescue.
In the next step, the Safety Production Supervision Bureau of Kunming City and Anning City will investigate and handle the cause of the accident and urge the company to seriously rectify it. At the same time, it immediately conducted a thorough inspection of the safety production conditions of the chemical industry in the city, especially the management of hazardous chemicals.
The tubing short section is a short tubing. Compared with the tubing, it is only of different lengths and the others are the same. The lengths are: 0.25m, 0.5m, 1M, 1.5m, etc., which are used to match the downhole string.