YCB Series Arc Gear Pump Features and Applications

● Use

It is suitable for conveying lubricating oil or similar lubricating oil without solid particles and fibers, non-corrosive, with temperature not higher than 80 ℃ and viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) Other liquids, and for hydraulic drive systems.

● Applications

In the oil delivery system can be used as transmission, booster pump;

In the fuel system can be used as delivery, pressure, jet fuel pump;

In the hydraulic transmission system can be used as a hydraulic pump to provide hydraulic power;

In all industrial areas, can be used for lubricating oil pump.

● structural features

This series of gear pump gear, shaft, pump body, pump cover, bearing sleeve, shaft seal and other components. Gear with double arc sinusoidal tooth shape manufacturing. Compared with the involute gear, it has the most prominent advantage that the tooth profile has no relative sliding during gear meshing. Therefore, the tooth surface has no wear, stable operation, no fluid due to low noise, long service life and high efficiency. The pump out of the shackles of the traditional design, making the gear pump in the design, production and use into a new field.

Pump with safety valve as overload protection, safety valve full back pressure of the pump rated discharge pressure of 1.5 times. Can also be allowed to discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be a long-term work of the valve, if necessary, can be installed separately in the pipeline.

Pump shaft seal is designed in two forms, one for the mechanical seal, one is the packing seal, according to the specific use and user requirements.

From the spindle extension to the pump to see, clockwise rotation.

Pure Precious Light

Wuxi Shengda Yukun Energy Development co.,Ltd , https://www.sdykenergy.com