Grain drying equipment and grain and oil processing machinery technology development seminar held in Zhengzhou
Huang Junqiang emphasized in the report titled “Analysis of the Status Quo and Development Trends of China's Grain Dryers†that China is the world’s largest food production and consumption country, with an annual total grain production of 600 million tons. Every year, about 5% of the grain can be lost due to the humid climate, the moisture in the wet valley, or the failure to achieve safe moisture. If you eat 1 pound of food per person per day, you can use up to 82,000 people a year. Therefore, it is imminent to develop a grain drying technology and change the passive situation of the traditional relying on heaven. Huang Junqiang believes that the development trend of China's grain drying technology is mainly divided into three aspects: the development of drying technology combined with drying ventilation and warehouse drying technology, the development of energy conservation and biomass energy utilization technologies, and the development of intelligent control technologies. Zhang Laiming said in a report titled “The Problems and Development Direction of China's Grain Drying†that although the level of comprehensive mechanization of agricultural production in China has been continuously improved, the level of mechanization for grain drying is very low, and it is less than 5%, and the mechanization level of Japan and the United States is widespread. above 95. In China's grain-drying industry, there are still problems such as low mechanization level, shortage of labor, large-sized dryers that are not suitable for use in the south, and food systems that cannot solve large quantities of wet grain drying. In the future, China's grain dryers should be large-scaled and miniaturized, fixed-type and mobile-type development, a variety of dry forms should be emphasized, agricultural machinery subsidy should be increased, and the grain drying problem in China should be solved according to local conditions. According to estimates, if the proportion of mechanical drying reaches 30%, at least 8000-10,000 sets of drying equipment are needed, and the market prospect of grain dryer in China is promising and the development potential is huge. Wu Wenbin made it clear in the report titled "Technology and Development of Grain Processing Equipment at Home and Abroad," that China's grain processing equipment has reached the international advanced level. In the future, the development direction of China's grain processing equipment should be to improve the health of equipment; to develop new food machinery and equipment based on innovation; to strengthen basic theoretical research; to develop energy-saving processing equipment to achieve sustainable development; Manufacturing; innovative business ideas, providing better services and achieving a win-win situation. Shen Jun pointed out in the report titled "The Direction and Practice for the Development of Wheat Milling Equipment Technology" that, as the country and the people are paying more attention to food safety, the development of wheat milling equipment to be safe and sanitary will be an inevitable trend. Processing companies require more and more stringent processing equipment. We need to research and develop more safe and sanitary equipment and processing technology. Equipment and engineering companies need to grasp the needs of the market and the people at all times to be invincible. The reporter learned at the scene that due to the large space that grain drying equipment generally occupies, users are hampering the approval of land for plant construction and hope that the state can provide help and support in terms of policies. The dryer companies are facing pressure from the development of technology, policies and markets. The overall improvement of the industry and technological progress require the joint efforts of the government and supply and demand sides. Jiangsu Guoliang Storage Engineering Company Technical Manager Huang Junqiang Professor of Henan University of Technology Zhang Lailin Professor of Henan University of Technology Wu Wenbin Wuxi COFCO Engineering & Technology Company Senior Engineer Shen Jun Wrapping Machine works by using different angles veneer roller coated on the workpiece to suppress, in the process, the process pressure rate and pressure can be adjusted according to different coating material. Alumium Wrapping Machine, Decorating Machine, Woodworking Machinery Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://www.chinaxingbangheavyindustry.com
A full set of manufacturing processes can be a full automatic assembly line, the normal working can be done without human intervention, it just need to feed material from adhesive coating to expect the sending until the product be finished which reduce labor costs and ensure the passing rate of processed products and processing efficiency.
Max film covering width:300mm heating power: 12.5kw
Max process thickness: 90mm overall dimensions:6000*600*1800mm
Min process length: 600mm weight:2500kgs
Feeding speed:1-60m/min max diameter of rolling cover material:400mm
Feeding motor power:1.5kw max width of cover film 600/800/1200mm
We have the following features:
1. Good quality quality is our culture
2. Fast service 24 hours answering service Vip service for you
3. Good reputation influence company
4. Quick after-sale service
5. Professional in this industry for 7 years
6. with us your money is safe,your business is safe.
7. We think our products will give you an edge over your competitors.
advantages of XINGBANG machine
NO items
1 the panel are made by CNC Gantry Milling,dimensions tolerance is under 0.05mm.
2 The shaft had a scale,which can control the size of workpiece.
3 All tubes and the guide bars are chromed with 0.03-0.05mm.
4 we adopt Magnetic brake in our control system,which is about RMB1000.while others use air brake or belt brake.
5 we use Aviation connector,which can be used for decades.
6 we use Bidirectional sophisticated glue knives.which made by Japanese material.
7 high-precision rolling guide are imported from taiwan.
8 excellent silicon gel wheels
9 all french Schneider brand electrical control system
10 each machine and compontes to be tested twice before shipment.(we have QC department)
11 our production aea about 10000 square meters.
12 we sell about 200sets woodworking machines each month.
13 our hot adhensive machines are NO 1 sales in domestic market,Quality stability has been recognized by the majority of our customers.
14 we have 10 Senior professional after-sale-service wrapping engineers all over the country,
15 PUR machine has the features of High efficiency, high speed, about 1-60m/miunute, suitable for mass production.
16 flexile frames,can save much space and save time.improve efficiency.